Add in the CSI device node the MIPI CSI2 clocks, interrupt and
increase the memory size in order to add the support of the
MIPI CSI-2 for A83T
Signed-off-by: Kévin L'hôpital <kevin.lhopital@xxxxxxxxxxx>
---
arch/arm/boot/dts/sun8i-a83t.dtsi | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 53c38deb8a08..5e6421eb8e28 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -1025,12 +1025,15 @@
csi: camera@1cb0000 {
compatible = "allwinner,sun8i-a83t-csi";
- reg = <0x01cb0000 0x1000>;
- interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x01cb0000 0x2000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_CSI>,
<&ccu CLK_CSI_SCLK>,
- <&ccu CLK_DRAM_CSI>;
- clock-names = "bus", "mod", "ram";
+ <&ccu CLK_DRAM_CSI>,
+ <&ccu CLK_MIPI_CSI>,
+ <&ccu CLK_CSI_MISC>;
+ clock-names = "bus", "mod", "ram", "mipi", "misc";
resets = <&ccu RST_BUS_CSI>;
status = "disabled";
--
2.17.1
