Re: [PATCH 00/49] DRM driver for Hikey 970

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sam,

Em Wed, 19 Aug 2020 19:35:58 +0200
Sam Ravnborg <sam@xxxxxxxxxxxx> escreveu:

> > +	ret = drm_bridge_attach(encoder, bridge, NULL, 0);  
> The bridge should be attached with the falg that tell the bridge NOT to
> create a connector.
> 
> The display driver shall created the connector.
> 
> Please see how other drivers do this (but most driver uses the old
> pattern so so look for drm_bridge_attach() with the flag argument.

Not sure if I got what should be done here.

>From what I've seen at the DRM code, one of the differences between the 
display engine for the first Hikey board (Kirin 620 based) and 960/970
is with regards to bridges. The first Hikey device doesn't use any
external bridges: both panel and HDMI support are provided by the SoC.

The Hikey 960 and 970 boards may either use an external bridge
or not. They also have two output connectors:

- The first one doesn't use an external bridge. It is used
  only together with an external daughter display panel board. 
  It sounds that one such panels is this one:

	https://www.96boards.org/blog/linksprite-hikey-aosp/

  I don't have any such board. The OOT driver came with one
  panel display, I didn't port such driver. 

- The second one uses an external bridge (adv7535) which is connected
  to the HDMI board's connector.

As there's just one bridge, the driver uses this to find its
OF data:

	struct device_node *bridge_node;

	bridge_node = of_graph_get_remote_port_parent(endpoint);
	dsi->bridge = of_drm_find_bridge(bridge_node);

Basically, it doesn't call drm_bridge_add(), and doesn't
declare any struct drm_bridge_funcs fops, as there's just one
bridge that it is always there.

-

That's said, when I ported the code from Kernel 4.9, I fixed
some broken things at the hotplug logic, trying to use other
drivers with external bridges as examples. Yet, as you noticed,
I ended using some older bridge model.  

The only other driver I found that doesn't use drm_bridge_add()
and doesn't pass 0 as flags is this one:

	drivers/gpu/drm/omapdrm/omap_drv.c

Is it a good example?

What I see different there there is that it calls drm_bridge_attach()
with:

	ret = drm_bridge_attach(pipe->encoder,
				pipe->output->bridge, NULL,
				DRM_BRIDGE_ATTACH_NO_CONNECTOR);

Is adding this enough? Or should I do something else?


Thanks,
Mauro




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux