Update it was a problem with the device itself. I have send it back to my supplier for rma. With kind regards William On 03/20/2010 05:20 PM, kc@xxxxxxxxxxxxxx wrote:
Dear mailinglist/Tevii, i have received a new tevii s660 yesterday. I have tried to use the device with scan but then my system freezes/slows down and i don't get any channels. Also when i create a channel list with my nova 2 hd and check if that works with vdr, then i removed the drivers from the nova card and plugged in the s660 and started vdr. But then still no picture only system freeze/slow down. I get nothing in the logs so it seems a driver issue. i have tried the drivers from the tevii site and also tried the 2.6.34rc1 kernel from ubuntu. I also tried it on 3 different systems but to no avail. in dmesg i get: [16735.496800] usbcore: deregistering interface driver dw2102 [16735.562114] dvb-usb: TeVii S660 USB successfully deinitialized and disconnected. [16737.219577] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware [16737.219593] usb 1-1: firmware: requesting dvb-usb-teviis660.fw [16737.229441] dvb-usb: downloading firmware from file 'dvb-usb-teviis660.fw' [16737.229453] dw2102: start downloading DW210X firmware [16737.350052] dvb-usb: found a 'TeVii S660 USB' in warm state. [16737.350171] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [16737.350414] DVB: registering new adapter (TeVii S660 USB) [16747.590032] dvb-usb: MAC address: 00:18:bd:5c:55:bb [16747.650033] Only Zarlink VP310/MT312/ZL10313 are supported chips. [16748.074008] DS3000 chip version: 0.192 attached. [16748.074015] dw2102: Attached ds3000+ds2020! [16748.074017] [16748.074189] DVB: registering adapter 0 frontend 0 (Montage Technology DS3000/TS2020)... [16748.076014] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/input/input11 [16748.076312] dvb-usb: schedule remote query interval to 150 msecs. [16748.076327] dvb-usb: TeVii S660 USB successfully initialized and connected. [16748.076596] usbcore: registered new interface driver dw2102 and after that i only see: [16748.224312] dw2102: query RC enter [16748.224320] dw2102: query RC start [16748.246317] dw2102: query RC end [16748.396311] dw2102: query RC enter [16748.396320] dw2102: query RC start [16748.415313] dw2102: query RC end [16748.561641] dw2102: query RC enter [16748.561650] dw2102: query RC start [16748.585317] dw2102: query RC end over and over just filling the logs. i saw that it was from/for the remote but it looks like debug messages. I have tried 3 different kernels 2.6.32/3/4rc1 but they all have the same issue with the driver from 15 march. What can be wrong? Any suggestions how i can troubleshoot this? With kind regards William van de Velde new tevii S660 system slow/freeze no channels linux -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
-- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
