Hello, I have recently swapped my TeVii S470 card for a new one, the old one was broken. I now have a revision 1.1 card and this card no longer works. It gets recognized and the modules are loaded, but the firmware never loads. Maybe as a result of this I get errors and timeouts after mythtv loads. see attached dmesg.txt. There is also a Hauppauge Nova S2 HD card, for which the firmware is loaded succesfully. Can anyone help me solve this issue? Hans Houwaard
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 (Ubuntu 2.6.31-14.48-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfde0000 (usable) [ 0.000000] BIOS-e820: 00000000cfde0000 - 00000000cfde3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfde3000 - 00000000cfdf0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfdf0000 - 00000000cfe00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0xcfde0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back [ 0.000000] 3 base 00CFE00000 mask FFFFE00000 uncachable [ 0.000000] 4 base 0100000000 mask FFE0000000 write-back [ 0.000000] 5 base 0120000000 mask FFF0000000 write-back [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000130000000 aka 4864M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cfde0000 (usable) [ 0.000000] modified: 00000000cfde0000 - 00000000cfde3000 (ACPI NVS) [ 0.000000] modified: 00000000cfde3000 - 00000000cfdf0000 (ACPI data) [ 0.000000] modified: 00000000cfdf0000 - 00000000cfe00000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 37866000 - 37fef734 [ 0.000000] Allocated new RAMDISK: 008ad000 - 01036734 [ 0.000000] Move RAMDISK from 0000000037866000 - 0000000037fef733 to 008ad000 - 01036733 [ 0.000000] ACPI: RSDP 000f6e40 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT cfde3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP cfde3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT cfde30c0 069CD (v01 GBT GBTUACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS cfde0000 00040 [ 0.000000] ACPI: SSDT cfde9b80 0030E (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET cfde9ec0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG cfde9f00 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: APIC cfde9ac0 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2437MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [00008a9000 - 00008ac116] BRK ==> [00008a9000 - 00008ac116] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008ad000 - 0001036734] NEW RAMDISK ==> [00008ad000 - 0001036734] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00f54e0] f54e0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000cfde0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cfde0 [ 0.000000] On node 0 totalpages: 851323 [ 0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1037000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4876 pages used for memmap [ 0.000000] HighMem zone: 619222 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at cfe00000 (gap: cfe00000:10200000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c2a47000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 844671 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=bd37d665-f558-4fd1-a609-48216cb20a52 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 17028480 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000cfde0) [ 0.000000] Memory: 3344460k/3405696k available (4565k kernel code, 59944k reserved, 2143k data, 540k init, 2496392k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB) [ 0.000000] .data : 0xc0575554 - 0xc078d308 (2143 kB) [ 0.000000] .text : 0xc0100000 - 0xc0575554 (4565 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:440 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2912.972 MHz processor. [ 0.000009] spurious 8259A interrupt: IRQ7. [ 0.001918] Console: colour VGA+ 80x25 [ 0.001920] console [tty0] enabled [ 0.002058] hpet clockevent registered [ 0.002064] alloc irq_desc for 24 on node 0 [ 0.002066] alloc kstat_irqs on node 0 [ 0.002073] HPET: 4 timers in total, 1 timers will be used for per-cpu timer [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 5825.94 BogoMIPS (lpj=11651888) [ 0.004020] Security Framework initialized [ 0.004034] AppArmor: AppArmor initialized [ 0.004039] Mount-cache hash table entries: 512 [ 0.004131] Initializing cgroup subsys ns [ 0.004134] Initializing cgroup subsys cpuacct [ 0.004137] Initializing cgroup subsys memory [ 0.004141] Initializing cgroup subsys freezer [ 0.004143] Initializing cgroup subsys net_cls [ 0.004152] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004154] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004156] CPU: Physical Processor ID: 0 [ 0.004157] CPU: Processor Core ID: 0 [ 0.004159] mce: CPU supports 5 MCE banks [ 0.004166] using C1E aware idle routine [ 0.004172] Performance Counters: AMD PMU driver. [ 0.004176] ... version: 0 [ 0.004177] ... bit width: 48 [ 0.004178] ... generic counters: 4 [ 0.004180] ... value mask: 0000ffffffffffff [ 0.004181] ... max period: 00007fffffffffff [ 0.004183] ... fixed-purpose counters: 0 [ 0.004184] ... counter mask: 000000000000000f [ 0.004187] Checking 'hlt' instruction... OK. [ 0.021463] ACPI: Core revision 20090521 [ 0.028586] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.069268] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping 02 [ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 5826.52 BogoMIPS (lpj=11653046) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] mce: CPU supports 5 MCE banks [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.156368] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping 02 [ 0.156387] Brought up 2 CPUs [ 0.156389] Total of 2 processors activated (11652.46 BogoMIPS). [ 0.156491] CPU0 attaching sched-domain: [ 0.156493] domain 0: span 0-1 level MC [ 0.156495] groups: 0 1 [ 0.156499] CPU1 attaching sched-domain: [ 0.156501] domain 0: span 0-1 level MC [ 0.156503] groups: 1 0 [ 0.156551] Booting paravirtualized kernel on bare hardware [ 0.156551] regulator: core version 0.5 [ 0.156551] Time: 12:22:16 Date: 03/17/10 [ 0.156551] NET: Registered protocol family 16 [ 0.156551] EISA bus registered [ 0.156551] ACPI: bus type pci registered [ 0.156551] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.156551] PCI: MCFG area at e0000000 reserved in E820 [ 0.156551] PCI: Using MMCONFIG for extended config space [ 0.156551] PCI: Using configuration type 1 for base access [ 0.156854] bio: create slab <bio-0> at 0 [ 0.156854] ACPI: EC: Look up EC in DSDT [ 0.163272] ACPI: Interpreter enabled [ 0.163280] ACPI: (supports S0 S3 S4 S5) [ 0.163298] ACPI: Using IOAPIC for interrupt routing [ 0.166613] ACPI: No dock devices found. [ 0.166695] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.166736] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff] [ 0.166790] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.166793] pci 0000:00:02.0: PME# disabled [ 0.166826] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.166829] pci 0000:00:04.0: PME# disabled [ 0.166867] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.166869] pci 0000:00:0a.0: PME# disabled [ 0.166919] pci 0000:00:11.0: reg 10 io port: [0xff00-0xff07] [ 0.166925] pci 0000:00:11.0: reg 14 io port: [0xfe00-0xfe03] [ 0.166932] pci 0000:00:11.0: reg 18 io port: [0xfd00-0xfd07] [ 0.166939] pci 0000:00:11.0: reg 1c io port: [0xfc00-0xfc03] [ 0.166945] pci 0000:00:11.0: reg 20 io port: [0xfb00-0xfb0f] [ 0.166952] pci 0000:00:11.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f3ff] [ 0.167004] pci 0000:00:12.0: reg 10 32bit mmio: [0xfe02e000-0xfe02efff] [ 0.167059] pci 0000:00:12.1: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff] [ 0.167134] pci 0000:00:12.2: reg 10 32bit mmio: [0xfe02c000-0xfe02c0ff] [ 0.167186] pci 0000:00:12.2: supports D1 D2 [ 0.167188] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.167192] pci 0000:00:12.2: PME# disabled [ 0.167223] pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff] [ 0.167277] pci 0000:00:13.1: reg 10 32bit mmio: [0xfe02a000-0xfe02afff] [ 0.167350] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe029000-0xfe0290ff] [ 0.167402] pci 0000:00:13.2: supports D1 D2 [ 0.167404] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.167408] pci 0000:00:13.2: PME# disabled [ 0.167525] pci 0000:00:14.1: reg 10 io port: [0x00-0x07] [ 0.167532] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] [ 0.167539] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] [ 0.167545] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] [ 0.167552] pci 0000:00:14.1: reg 20 io port: [0xfa00-0xfa0f] [ 0.167619] pci 0000:00:14.2: reg 10 64bit mmio: [0xfe024000-0xfe027fff] [ 0.167662] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.167666] pci 0000:00:14.2: PME# disabled [ 0.167770] pci 0000:00:14.5: reg 10 32bit mmio: [0xfe028000-0xfe028fff] [ 0.167893] pci 0000:01:00.0: reg 10 32bit mmio: [0xf6000000-0xf6ffffff] [ 0.167902] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff] [ 0.167910] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf4000000-0xf5ffffff] [ 0.167916] pci 0000:01:00.0: reg 24 io port: [0xef00-0xef7f] [ 0.167921] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x07ffff] [ 0.168017] pci 0000:00:02.0: bridge io port: [0xe000-0xefff] [ 0.168020] pci 0000:00:02.0: bridge 32bit mmio: [0xf4000000-0xf7ffffff] [ 0.168023] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.168075] pci 0000:02:00.0: reg 10 64bit mmio: [0xfda00000-0xfdbfffff] [ 0.168162] pci 0000:02:00.0: supports D1 D2 [ 0.168164] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot [ 0.168170] pci 0000:02:00.0: PME# disabled [ 0.168234] pci 0000:00:04.0: bridge io port: [0xd000-0xdfff] [ 0.168237] pci 0000:00:04.0: bridge 32bit mmio: [0xfda00000-0xfdbfffff] [ 0.168240] pci 0000:00:04.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff] [ 0.168275] pci 0000:03:00.0: reg 10 io port: [0xce00-0xceff] [ 0.168290] pci 0000:03:00.0: reg 18 64bit mmio: [0xfdcff000-0xfdcfffff] [ 0.168301] pci 0000:03:00.0: reg 20 64bit mmio: [0xfdce0000-0xfdceffff] [ 0.168307] pci 0000:03:00.0: reg 30 32bit mmio: [0x000000-0x00ffff] [ 0.168337] pci 0000:03:00.0: supports D1 D2 [ 0.168339] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.168342] pci 0000:03:00.0: PME# disabled [ 0.168402] pci 0000:00:0a.0: bridge io port: [0xc000-0xcfff] [ 0.168405] pci 0000:00:0a.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 0.168409] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xfdc00000-0xfdcfffff] [ 0.168468] pci 0000:04:06.0: reg 10 32bit mmio: [0xf9000000-0xf9ffffff] [ 0.168576] pci 0000:04:06.1: reg 10 32bit mmio: [0xf8000000-0xf8ffffff] [ 0.168677] pci 0000:04:06.2: reg 10 32bit mmio: [0xfb000000-0xfbffffff] [ 0.168779] pci 0000:04:06.4: reg 10 32bit mmio: [0xfa000000-0xfaffffff] [ 0.168889] pci 0000:00:14.4: transparent bridge [ 0.168893] pci 0000:00:14.4: bridge io port: [0xb000-0xbfff] [ 0.168897] pci 0000:00:14.4: bridge 32bit mmio: [0xf8000000-0xfcffffff] [ 0.168901] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfdd00000-0xfddfffff] [ 0.168914] pci_bus 0000:00: on NUMA node 0 [ 0.168918] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.169144] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.169211] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 0.169253] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT] [ 0.169303] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] [ 0.186285] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.186356] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.186426] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.186496] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.186565] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.186635] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.186705] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.186775] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.186904] SCSI subsystem initialized [ 0.186938] libata version 3.00 loaded. [ 0.186938] usbcore: registered new interface driver usbfs [ 0.186938] usbcore: registered new interface driver hub [ 0.186938] usbcore: registered new device driver usb [ 0.186938] ACPI: WMI: Mapper loaded [ 0.186938] PCI: Using ACPI for IRQ routing [ 0.186938] pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff] [ 0.186938] pci 0000:00:00.0: BAR 3: can't allocate resource [ 0.196006] Bluetooth: Core ver 2.15 [ 0.196017] NET: Registered protocol family 31 [ 0.196017] Bluetooth: HCI device and connection manager initialized [ 0.196017] Bluetooth: HCI socket layer initialized [ 0.196017] NetLabel: Initializing [ 0.196017] NetLabel: domain hash size = 128 [ 0.196017] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.196027] NetLabel: unlabeled traffic allowed by default [ 0.196052] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0 [ 0.196056] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.200027] hpet: hpet2 irq 24 for MSI [ 0.204030] Switched to high resolution mode on CPU 0 [ 0.204351] Switched to high resolution mode on CPU 1 [ 0.212022] pnp: PnP ACPI init [ 0.212036] ACPI: bus type pnp registered [ 0.213705] pnp 00:09: mem resource (0xd1c00-0xd3fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.213708] pnp 00:09: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.213711] pnp 00:09: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.213714] pnp 00:09: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.213717] pnp 00:09: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.213719] pnp 00:09: mem resource (0x100000-0xcfddffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.213787] pnp: PnP ACPI: found 10 devices [ 0.213789] ACPI: ACPI bus type pnp unregistered [ 0.213791] PnPBIOS: Disabled by ACPI PNP [ 0.213801] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.213803] system 00:01: ioport range 0x220-0x225 has been reserved [ 0.213805] system 00:01: ioport range 0x290-0x294 has been reserved [ 0.213809] system 00:02: ioport range 0x4100-0x411f has been reserved [ 0.213812] system 00:02: ioport range 0x228-0x22f has been reserved [ 0.213814] system 00:02: ioport range 0x238-0x23f has been reserved [ 0.213816] system 00:02: ioport range 0x40b-0x40b has been reserved [ 0.213818] system 00:02: ioport range 0x4d6-0x4d6 has been reserved [ 0.213821] system 00:02: ioport range 0xc00-0xc01 has been reserved [ 0.213823] system 00:02: ioport range 0xc14-0xc14 has been reserved [ 0.213825] system 00:02: ioport range 0xc50-0xc52 has been reserved [ 0.213827] system 00:02: ioport range 0xc6c-0xc6d has been reserved [ 0.213830] system 00:02: ioport range 0xc6f-0xc6f has been reserved [ 0.213832] system 00:02: ioport range 0xcd0-0xcd1 has been reserved [ 0.213834] system 00:02: ioport range 0xcd2-0xcd3 has been reserved [ 0.213843] system 00:02: ioport range 0xcd4-0xcdf has been reserved [ 0.213845] system 00:02: ioport range 0x4000-0x40fe has been reserved [ 0.213848] system 00:02: ioport range 0x4210-0x4217 has been reserved [ 0.213850] system 00:02: ioport range 0xb00-0xb0f has been reserved [ 0.213853] system 00:02: ioport range 0xb10-0xb1f has been reserved [ 0.213855] system 00:02: ioport range 0xb20-0xb3f has been reserved [ 0.213860] system 00:08: iomem range 0xe0000000-0xefffffff has been reserved [ 0.213865] system 00:09: iomem range 0xcfde0000-0xcfdfffff could not be reserved [ 0.213867] system 00:09: iomem range 0xffff0000-0xffffffff has been reserved [ 0.213870] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.213872] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.213875] system 00:09: iomem range 0xfff80000-0xfffeffff has been reserved [ 0.248502] AppArmor: AppArmor Filesystem Enabled [ 0.248535] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 [ 0.248538] pci 0000:00:02.0: IO window: 0xe000-0xefff [ 0.248541] pci 0000:00:02.0: MEM window: 0xf4000000-0xf7ffffff [ 0.248544] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.248548] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02 [ 0.248550] pci 0000:00:04.0: IO window: 0xd000-0xdfff [ 0.248553] pci 0000:00:04.0: MEM window: 0xfda00000-0xfdbfffff [ 0.248556] pci 0000:00:04.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff [ 0.248560] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:03 [ 0.248562] pci 0000:00:0a.0: IO window: 0xc000-0xcfff [ 0.248565] pci 0000:00:0a.0: MEM window: 0xfde00000-0xfdefffff [ 0.248567] pci 0000:00:0a.0: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff [ 0.248571] pci 0000:00:14.4: PCI bridge, secondary bus 0000:04 [ 0.248574] pci 0000:00:14.4: IO window: 0xb000-0xbfff [ 0.248579] pci 0000:00:14.4: MEM window: 0xf8000000-0xfcffffff [ 0.248583] pci 0000:00:14.4: PREFETCH window: 0xfdd00000-0xfddfffff [ 0.248593] alloc irq_desc for 18 on node -1 [ 0.248594] alloc kstat_irqs on node -1 [ 0.248602] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.248606] pci 0000:00:02.0: setting latency timer to 64 [ 0.248610] alloc irq_desc for 16 on node -1 [ 0.248611] alloc kstat_irqs on node -1 [ 0.248618] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.248621] pci 0000:00:04.0: setting latency timer to 64 [ 0.248626] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.248628] pci 0000:00:0a.0: setting latency timer to 64 [ 0.248636] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.248638] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.248640] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] [ 0.248642] pci_bus 0000:01: resource 1 mem: [0xf4000000-0xf7ffffff] [ 0.248644] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.248646] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff] [ 0.248648] pci_bus 0000:02: resource 1 mem: [0xfda00000-0xfdbfffff] [ 0.248650] pci_bus 0000:02: resource 2 pref mem [0xfdf00000-0xfdffffff] [ 0.248652] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff] [ 0.248654] pci_bus 0000:03: resource 1 mem: [0xfde00000-0xfdefffff] [ 0.248656] pci_bus 0000:03: resource 2 pref mem [0xfdc00000-0xfdcfffff] [ 0.248658] pci_bus 0000:04: resource 0 io: [0xb000-0xbfff] [ 0.248660] pci_bus 0000:04: resource 1 mem: [0xf8000000-0xfcffffff] [ 0.248662] pci_bus 0000:04: resource 2 pref mem [0xfdd00000-0xfddfffff] [ 0.248664] pci_bus 0000:04: resource 3 io: [0x00-0xffff] [ 0.248666] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff] [ 0.248694] NET: Registered protocol family 2 [ 0.248765] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.249006] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.249519] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.249811] TCP: Hash tables configured (established 131072 bind 65536) [ 0.249813] TCP reno registered [ 0.249886] NET: Registered protocol family 1 [ 0.249933] Trying to unpack rootfs image as initramfs... [ 0.397733] Freeing initrd memory: 7717k freed [ 0.401407] cpufreq-nforce2: No nForce2 chipset. [ 0.401427] Scanning for low memory corruption every 60 seconds [ 0.401500] audit: initializing netlink socket (disabled) [ 0.401511] type=2000 audit(1268828535.400:1): initialized [ 0.407894] highmem bounce pool size: 64 pages [ 0.407898] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.408930] VFS: Disk quotas dquot_6.5.2 [ 0.408975] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.409421] fuse init (API version 7.12) [ 0.409477] msgmni has been set to 1673 [ 0.409667] alg: No test for stdrng (krng) [ 0.409684] io scheduler noop registered [ 0.409686] io scheduler anticipatory registered [ 0.409687] io scheduler deadline registered [ 0.409717] io scheduler cfq registered (default) [ 1.236027] pci 0000:00:12.1: OHCI: BIOS handoff failed (BIOS bug?) 00000184 [ 1.308055] pci 0000:01:00.0: Boot video device [ 1.308164] alloc irq_desc for 25 on node -1 [ 1.308166] alloc kstat_irqs on node -1 [ 1.308173] pcieport-driver 0000:00:02.0: irq 25 for MSI/MSI-X [ 1.308178] pcieport-driver 0000:00:02.0: setting latency timer to 64 [ 1.308250] alloc irq_desc for 26 on node -1 [ 1.308252] alloc kstat_irqs on node -1 [ 1.308256] pcieport-driver 0000:00:04.0: irq 26 for MSI/MSI-X [ 1.308260] pcieport-driver 0000:00:04.0: setting latency timer to 64 [ 1.308326] alloc irq_desc for 27 on node -1 [ 1.308327] alloc kstat_irqs on node -1 [ 1.308331] pcieport-driver 0000:00:0a.0: irq 27 for MSI/MSI-X [ 1.308335] pcieport-driver 0000:00:0a.0: setting latency timer to 64 [ 1.308385] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.308402] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.308493] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.308496] ACPI: Power Button [PWRF] [ 1.308534] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.308536] ACPI: Power Button [PWRB] [ 1.308770] processor LNXCPU:00: registered as cooling_device0 [ 1.308799] processor LNXCPU:01: registered as cooling_device1 [ 1.310312] isapnp: Scanning for PnP cards... [ 1.664144] isapnp: No Plug & Play device found [ 1.664988] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.665857] brd: module loaded [ 1.666169] loop: module loaded [ 1.666225] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.666272] ahci 0000:00:11.0: version 3.0 [ 1.666286] alloc irq_desc for 22 on node -1 [ 1.666288] alloc kstat_irqs on node -1 [ 1.666297] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.666426] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 1.666429] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 1.666958] scsi0 : ahci [ 1.667058] scsi1 : ahci [ 1.667117] scsi2 : ahci [ 1.667170] scsi3 : ahci [ 1.667222] scsi4 : ahci [ 1.667277] scsi5 : ahci [ 1.667375] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 [ 1.667378] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 1.667382] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 1.667385] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 1.667388] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22 [ 1.667391] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22 [ 1.667596] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.667701] scsi6 : pata_atiixp [ 1.667758] scsi7 : pata_atiixp [ 1.668502] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 1.668504] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 1.669047] Fixed MDIO Bus: probed [ 1.669074] PPP generic driver version 2.4.2 [ 1.669152] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.669167] alloc irq_desc for 17 on node -1 [ 1.669169] alloc kstat_irqs on node -1 [ 1.669177] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.669191] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 1.669230] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.669250] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround [ 1.669268] ehci_hcd 0000:00:12.2: debug port 1 [ 1.669292] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000 [ 1.680030] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.680080] usb usb1: configuration #1 chosen from 1 choice [ 1.680101] hub 1-0:1.0: USB hub found [ 1.680108] hub 1-0:1.0: 6 ports detected [ 1.680158] alloc irq_desc for 19 on node -1 [ 1.680160] alloc kstat_irqs on node -1 [ 1.680167] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.680176] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 1.680195] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.680212] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround [ 1.680229] ehci_hcd 0000:00:13.2: debug port 1 [ 1.680251] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000 [ 1.692027] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.692065] usb usb2: configuration #1 chosen from 1 choice [ 1.692084] hub 2-0:1.0: USB hub found [ 1.692089] hub 2-0:1.0: 6 ports detected [ 1.692139] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.692150] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.692158] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.692179] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.692209] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000 [ 1.752054] usb usb3: configuration #1 chosen from 1 choice [ 1.752076] hub 3-0:1.0: USB hub found [ 1.752084] hub 3-0:1.0: 3 ports detected [ 1.752123] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.752130] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 1.752154] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.752168] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000 [ 1.812057] usb usb4: configuration #1 chosen from 1 choice [ 1.812078] hub 4-0:1.0: USB hub found [ 1.812086] hub 4-0:1.0: 3 ports detected [ 1.812125] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.812133] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.812154] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.812180] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000 [ 1.872055] usb usb5: configuration #1 chosen from 1 choice [ 1.872074] hub 5-0:1.0: USB hub found [ 1.872081] hub 5-0:1.0: 3 ports detected [ 1.872120] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.872127] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 1.872149] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.872168] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000 [ 1.932058] usb usb6: configuration #1 chosen from 1 choice [ 1.932077] hub 6-0:1.0: USB hub found [ 1.932084] hub 6-0:1.0: 3 ports detected [ 1.932125] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.932133] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 1.932157] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.932170] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000 [ 1.984053] ata6: SATA link down (SStatus 0 SControl 300) [ 1.984080] ata4: SATA link down (SStatus 0 SControl 300) [ 1.984131] ata5: SATA link down (SStatus 0 SControl 300) [ 1.992062] usb usb7: configuration #1 chosen from 1 choice [ 1.992081] hub 7-0:1.0: USB hub found [ 1.992089] hub 7-0:1.0: 2 ports detected [ 1.992128] uhci_hcd: USB Universal Host Controller Interface driver [ 1.992194] PNP: No PS/2 controller found. Probing ports directly. [ 2.025347] Failed to disable AUX port, but continuing anyway... Is this a SiS? [ 2.025348] If AUX port is really absent please use the 'i8042.noaux' option. [ 2.148015] ata3: softreset failed (device not ready) [ 2.148018] ata3: applying SB600 PMP SRST workaround and retrying [ 2.148034] ata1: softreset failed (device not ready) [ 2.148036] ata1: applying SB600 PMP SRST workaround and retrying [ 2.276116] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.276165] mice: PS/2 mouse device common for all mice [ 2.276238] rtc_cmos 00:05: RTC can wake from S4 [ 2.276264] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 2.276298] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 2.276375] device-mapper: uevent: version 1.0.3 [ 2.276462] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx [ 2.276550] device-mapper: multipath: version 1.1.0 loaded [ 2.276552] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.276668] EISA: Probing bus 0 at eisa.0 [ 2.276685] Cannot allocate resource for EISA slot 4 [ 2.276701] EISA: Detected 0 cards. [ 2.276833] cpuidle: using governor ladder [ 2.276835] cpuidle: using governor menu [ 2.277183] TCP cubic registered [ 2.277305] NET: Registered protocol family 10 [ 2.277643] lo: Disabled Privacy Extensions [ 2.277861] NET: Registered protocol family 17 [ 2.277877] Bluetooth: L2CAP ver 2.13 [ 2.277878] Bluetooth: L2CAP socket layer initialized [ 2.277880] Bluetooth: SCO (Voice Link) ver 0.6 [ 2.277881] Bluetooth: SCO socket layer initialized [ 2.277909] Bluetooth: RFCOMM TTY layer initialized [ 2.277911] Bluetooth: RFCOMM socket layer initialized [ 2.277913] Bluetooth: RFCOMM ver 1.11 [ 2.277926] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ processors (2 cpu cores) (version 2.20.00) [ 2.277966] powernow-k8: 0 : fid 0x15 (2900 MHz), vid 0x6 [ 2.277968] powernow-k8: 1 : fid 0x14 (2800 MHz), vid 0x7 [ 2.277969] powernow-k8: 2 : fid 0x12 (2600 MHz), vid 0x9 [ 2.277971] powernow-k8: 3 : fid 0x10 (2400 MHz), vid 0xb [ 2.277973] powernow-k8: 4 : fid 0xe (2200 MHz), vid 0xd [ 2.277975] powernow-k8: 5 : fid 0xc (2000 MHz), vid 0xf [ 2.277976] powernow-k8: 6 : fid 0xa (1800 MHz), vid 0x11 [ 2.277978] powernow-k8: 7 : fid 0x2 (1000 MHz), vid 0x12 [ 2.278008] Using IPI No-Shortcut mode [ 2.278052] PM: Resume from disk failed. [ 2.278065] registered taskstats version 1 [ 2.278181] Magic number: 2:353:380 [ 2.278264] rtc_cmos 00:05: setting system clock to 2010-03-17 12:22:18 UTC (1268828538) [ 2.278266] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.278268] EDD information not available. [ 2.312027] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.312048] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.318366] ata1.00: ATA-7: SAMSUNG HD502IJ, 1AA01113, max UDMA7 [ 2.318368] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 2.318391] ata3.00: ATA-7: SAMSUNG HD103SI, 1AG01113, max UDMA7 [ 2.318393] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 2.324772] ata1.00: configured for UDMA/133 [ 2.324825] ata3.00: configured for UDMA/133 [ 2.340596] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5 [ 2.340693] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.340722] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.340752] sd 0:0:0:0: [sda] Write Protect is off [ 2.340754] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.340770] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.340861] sda: sda1 sda2 < [ 2.372514] ata2: softreset failed (device not ready) [ 2.372517] ata2: applying SB600 PMP SRST workaround and retrying [ 2.394225] sda5 > sda3 [ 2.394423] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.536025] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.536036] usb 3-2: new low speed USB device using ohci_hcd and address 2 [ 2.538971] ata2.00: ATAPI: Optiarc BD ROM BC-5100S, 1.10, max UDMA/66 [ 2.542065] ata2.00: configured for UDMA/66 [ 2.567927] scsi 1:0:0:0: CD-ROM Optiarc BD ROM BC-5100S 1.10 PQ: 0 ANSI: 5 [ 2.586270] sr0: scsi3-mmc drive: 32x/32x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.586273] Uniform CD-ROM driver Revision: 3.20 [ 2.586328] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.586359] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.586416] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5 [ 2.586489] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 2.586513] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.586541] sd 2:0:0:0: [sdb] Write Protect is off [ 2.586543] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.586558] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.586630] sdb: sdb1 sdb2 < sdb5 > sdb3 [ 2.642325] sd 2:0:0:0: [sdb] Attached SCSI disk [ 2.706141] usb 3-2: configuration #1 chosen from 1 choice [ 2.740097] Freeing unused kernel memory: 540k freed [ 2.740392] Write protecting the kernel text: 4568k [ 2.740420] Write protecting the kernel read-only data: 1836k [ 2.870730] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.870748] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.870781] r8169 0000:03:00.0: setting latency timer to 64 [ 2.870818] alloc irq_desc for 28 on node -1 [ 2.870820] alloc kstat_irqs on node -1 [ 2.870832] r8169 0000:03:00.0: irq 28 for MSI/MSI-X [ 2.871286] eth0: RTL8168c/8111c at 0xf8038000, 00:1f:d0:5a:d4:cc, XID 3c4000c0 IRQ 28 [ 2.905296] usbcore: registered new interface driver hiddev [ 2.905362] usbcore: registered new interface driver usbhid [ 2.905364] usbhid: v2.6:USB HID core driver [ 2.913328] input: MLK Trust Keyboard 14909 as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input3 [ 2.913381] sunplus 0003:04FC:05D8.0001: input,hidraw0: USB HID v1.00 Keyboard [MLK Trust Keyboard 14909] on usb-0000:00:12.0-2/input0 [ 2.920098] sunplus 0003:04FC:05D8.0002: fixing up Sunplus Wireless Desktop report descriptor [ 2.920839] input: MLK Trust Keyboard 14909 as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/input/input4 [ 2.920924] sunplus 0003:04FC:05D8.0002: input,hiddev96,hidraw1: USB HID v1.00 Mouse [MLK Trust Keyboard 14909] on usb-0000:00:12.0-2/input1 [ 3.008540] usb 3-3: new full speed USB device using ohci_hcd and address 3 [ 3.057939] md: bind<sda1> [ 3.059034] md: bind<sda3> [ 3.183190] usb 3-3: configuration #1 chosen from 1 choice [ 3.191220] md: bind<sdb1> [ 3.193094] md: raid0 personality registered for level 0 [ 3.193176] raid0: looking at sdb1 [ 3.193178] raid0: comparing sdb1(916652544) [ 3.193180] with sdb1(916652544) [ 3.193181] raid0: END [ 3.193182] raid0: ==> UNIQUE [ 3.193183] raid0: 1 zones [ 3.193185] raid0: looking at sda1 [ 3.193187] raid0: comparing sda1(916652544) [ 3.193188] with sdb1(916652544) [ 3.193189] raid0: EQUAL [ 3.193191] raid0: FINAL 1 zones [ 3.193193] raid0: done. [ 3.193195] raid0 : md_size is 1833305088 sectors. [ 3.193196] ******* md1 configuration ********* [ 3.193198] zone0=[sda1/sdb1/] [ 3.193201] zone offset=0kb device offset=0kb size=916652544kb [ 3.193202] ********************************** [ 3.193203] [ 3.193210] md1: detected capacity change from 0 to 938652205056 [ 3.194307] md1: unknown partition table [ 3.202139] md: bind<sdb3> [ 3.214536] md: raid1 personality registered for level 1 [ 3.214670] raid1: raid set md0 active with 2 out of 2 mirrors [ 3.214694] md0: detected capacity change from 0 to 21467889664 [ 3.215883] md0: unknown partition table [ 3.460522] usb 4-1: new full speed USB device using ohci_hcd and address 2 [ 3.679191] usb 4-1: configuration #1 chosen from 1 choice [ 4.004018] usb 6-1: new full speed USB device using ohci_hcd and address 2 [ 4.100340] md: linear personality registered for level -1 [ 4.102372] md: multipath personality registered for level -4 [ 4.106639] xor: automatically using best checksumming function: pIII_sse [ 4.124014] pIII_sse : 8713.000 MB/sec [ 4.124015] xor: using function: pIII_sse (8713.000 MB/sec) [ 4.124510] async_tx: api initialized (async) [ 4.177206] usb 6-1: configuration #1 chosen from 1 choice [ 4.192045] raid6: int32x1 1310 MB/s [ 4.260025] raid6: int32x2 1266 MB/s [ 4.328071] raid6: int32x4 791 MB/s [ 4.396084] raid6: int32x8 611 MB/s [ 4.464039] raid6: mmxx1 2315 MB/s [ 4.532019] raid6: mmxx2 4107 MB/s [ 4.600024] raid6: sse1x1 2349 MB/s [ 4.668026] raid6: sse1x2 3951 MB/s [ 4.736029] raid6: sse2x1 3881 MB/s [ 4.804023] raid6: sse2x2 5333 MB/s [ 4.804024] raid6: using algorithm sse2x2 (5333 MB/s) [ 4.806260] md: raid6 personality registered for level 6 [ 4.806262] md: raid5 personality registered for level 5 [ 4.806264] md: raid4 personality registered for level 4 [ 4.812087] md: raid10 personality registered for level 10 [ 4.832458] PM: Starting manual resume from disk [ 4.832461] PM: Resume from partition 8:5 [ 4.832463] PM: Checking hibernation image. [ 4.832583] PM: Resume from disk failed. [ 4.848155] kjournald starting. Commit interval 5 seconds [ 4.848163] EXT3-fs: mounted filesystem with writeback data mode. [ 6.116075] Adding 9092748k swap on /dev/sda5. Priority:-1 extents:1 across:9092748k [ 6.140221] Adding 9092748k swap on /dev/sdb5. Priority:-2 extents:1 across:9092748k [ 6.268211] EXT3 FS on md0, internal journal [ 6.537158] udev: starting version 147 [ 7.733441] r8169: eth0: link up [ 7.733447] r8169: eth0: link up [ 8.217938] lp: driver loaded but no devices found [ 8.293141] Linux agpgart interface v0.103 [ 8.575343] Bluetooth: Generic Bluetooth USB driver ver 0.5 [ 8.575439] usbcore: registered new interface driver btusb [ 8.839686] usbcore: registered new interface driver usbserial [ 8.839698] USB Serial support registered for generic [ 8.839737] usbcore: registered new interface driver usbserial_generic [ 8.839739] usbserial: USB Serial Driver core [ 8.894998] USB Serial support registered for FTDI USB Serial Device [ 8.895075] ftdi_sio 4-1:1.0: FTDI USB Serial Device converter detected [ 8.895100] usb 4-1: Detected FT232BM [ 8.895102] usb 4-1: Number of endpoints 2 [ 8.895104] usb 4-1: Endpoint 1 MaxPacketSize 64 [ 8.895105] usb 4-1: Endpoint 2 MaxPacketSize 64 [ 8.895107] usb 4-1: Setting MaxPacketSize 64 [ 8.895535] ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f] [ 8.895538] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 8.895543] piix4_smbus: probe of 0000:00:14.0 failed with error -16 [ 8.901112] ftdi_sio ttyUSB0: Unable to read latency timer: -32 [ 8.901180] usb 4-1: FTDI USB Serial Device converter now attached to ttyUSB0 [ 8.901213] usbcore: registered new interface driver ftdi_sio [ 8.901215] ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver [ 9.834162] nvidia: module license 'NVIDIA' taints kernel. [ 9.834166] Disabling lock debugging due to kernel taint [ 9.951138] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 10.087460] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 10.087468] nvidia 0000:01:00.0: setting latency timer to 64 [ 10.087658] NVRM: loading NVIDIA UNIX x86 Kernel Module 190.53 Tue Dec 8 18:51:41 PST 2009 [ 10.219364] Linux video capture interface: v2.00 [ 10.391980] cx23885 driver version 0.0.2 loaded [ 10.392023] cx23885 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 10.392095] CORE cx23885[0]: subsystem: d470:9022, board: TeVii S470 [card=15,autodetected] [ 10.520007] cx23885_dvb_register() allocating 1 frontend(s) [ 10.520164] cx23885[0]: cx23885 based dvb card [ 10.691343] DS3000 chip version: 0.192 attached. [ 10.691347] DVB: registering new adapter (cx23885[0]) [ 10.691350] DVB: registering adapter 0 frontend 0 (Montage Technology DS3000/TS2020)... [ 10.691562] cx23885_dev_checkrevision() Hardware revision = 0xb0 [ 10.691569] cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 16, latency: 0, mmio: 0xfda00000 [ 10.691576] cx23885 0000:02:00.0: setting latency timer to 64 [ 10.691581] IRQ 16/cx23885[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 10.742988] cx2388x alsa driver version 0.0.7 loaded [ 10.743040] alloc irq_desc for 20 on node -1 [ 10.743042] alloc kstat_irqs on node -1 [ 10.743053] cx88_audio 0000:04:06.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 10.743448] cx88[0]: subsystem: 0070:6906, board: Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [card=69,autodetected], frontend(s): 1 [ 10.743450] cx88[0]: TV tuner type -1, Radio tuner type -1 [ 10.747333] cx88/0: cx2388x v4l2 driver version 0.0.7 loaded [ 10.749436] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.7 loaded [ 10.935780] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 10.992048] tveeprom 3-0050: Hauppauge model 69100, rev B2C3, serial# 5208002 [ 10.992051] tveeprom 3-0050: MAC address is 00:0d:fe:4f:77:c2 [ 10.992054] tveeprom 3-0050: tuner model is Conexant CX24118A (idx 123, type 4) [ 10.992056] tveeprom 3-0050: TV standards ATSC/DVB Digital (eeprom 0x80) [ 10.992058] tveeprom 3-0050: audio processor is None (idx 0) [ 10.992060] tveeprom 3-0050: decoder processor is CX882 (idx 25) [ 10.992062] tveeprom 3-0050: has no radio, has IR receiver, has no IR transmitter [ 10.992064] cx88[0]: hauppauge eeprom: model=69100 [ 10.994024] input: cx88 IR (Hauppauge WinTV-HVR400 as /devices/pci0000:00/0000:00:14.4/0000:04:06.1/input/input5 [ 10.994072] Creating IR device irrcv0 [ 10.994076] IRQ 20/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 10.994115] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards [ 11.004974] cx8800 0000:04:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 11.004983] cx88[0]/0: found at 0000:04:06.0, rev: 5, irq: 20, latency: 32, mmio: 0xf9000000 [ 11.004995] IRQ 20/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 11.005051] cx88[0]/0: registered device video0 [v4l2] [ 11.005070] cx88[0]/0: registered device vbi0 [ 11.005243] cx88[0]/2: cx2388x 8802 Driver Manager [ 11.005255] cx88-mpeg driver manager 0000:04:06.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 11.005264] cx88[0]/2: found at 0000:04:06.2, rev: 5, irq: 20, latency: 32, mmio: 0xfb000000 [ 11.005267] IRQ 20/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 11.099136] cx88/2: cx2388x dvb driver version 0.0.7 loaded [ 11.099139] cx88/2: registering cx8802 driver, type: dvb access: shared [ 11.099142] cx88[0]/2: subsystem: 0070:6906, board: Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [card=69] [ 11.099144] cx88[0]/2: cx2388x based DVB/ATSC card [ 11.099146] cx8802_alloc_frontends() allocating 1 frontend(s) [ 11.774398] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input6 [ 11.796232] DVB: registering new adapter (cx88[0]) [ 11.796238] DVB: registering adapter 1 frontend 0 (Conexant CX24116/CX24118)... [ 12.067188] kjournald starting. Commit interval 5 seconds [ 12.068421] EXT3 FS on md1, internal journal [ 12.068429] EXT3-fs: mounted filesystem with writeback data mode. [ 18.154464] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 18.154466] Bluetooth: BNEP filters: protocol multicast [ 18.176939] Bridge firewalling registered [ 18.272517] eth0: no IPv6 routers present [ 20.101836] lirc_dev: IR Remote Control driver registered, major 61 [ 20.661049] CPU0 attaching NULL sched-domain. [ 20.661055] CPU1 attaching NULL sched-domain. [ 20.672552] CPU0 attaching sched-domain: [ 20.672555] domain 0: span 0-1 level MC [ 20.672557] groups: 0 1 [ 20.672560] domain 1: span 0-1 level CPU [ 20.672562] groups: 0-1 (__cpu_power = 2048) [ 20.672565] CPU1 attaching sched-domain: [ 20.672567] domain 0: span 0-1 level MC [ 20.672569] groups: 1 0 [ 20.672571] domain 1: span 0-1 level CPU [ 20.672573] groups: 0-1 (__cpu_power = 2048) [ 81.500022] Clocksource tsc unstable (delta = -189284661 ns) [ 95.870879] cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)... [ 95.870886] cx88_audio 0000:04:06.1: firmware: requesting dvb-fe-cx24116.fw [ 95.944922] cx24116_firmware_ondemand: Waiting for firmware upload(2)... [ 101.980080] cx24116_load_firmware: FW version 1.23.86.1 [ 101.980090] cx24116_firmware_ondemand: Firmware upload complete [ 104.364519] f300_xfer: timeout, the slave no response [ 104.704023] f300_xfer: timeout, the slave no response [ 105.044030] f300_xfer: timeout, the slave no response [ 105.384517] f300_xfer: timeout, the slave no response [ 105.724518] f300_xfer: timeout, the slave no response [ 106.064516] f300_xfer: timeout, the slave no response [ 106.404837] f300_xfer: timeout, the slave no response [ 106.744034] f300_xfer: timeout, the slave no response [ 107.084029] f300_xfer: timeout, the slave no response [ 107.424522] f300_xfer: timeout, the slave no response [ 108.480033] f300_xfer: timeout, the slave no response [ 108.820519] f300_xfer: timeout, the slave no response [ 109.160518] f300_xfer: timeout, the slave no response [ 109.500518] f300_xfer: timeout, the slave no response [ 109.840021] f300_xfer: timeout, the slave no response [ 110.180520] f300_xfer: timeout, the slave no response [ 110.520519] f300_xfer: timeout, the slave no response [ 110.860034] f300_xfer: timeout, the slave no response [ 111.200026] f300_xfer: timeout, the slave no response [ 111.540686] f300_xfer: timeout, the slave no response
