Hi Dafna,
Thanks for the patch,
On 7/31/20 9:12 AM, Dafna Hirschfeld wrote:
> 1. Add the file 'rkisp1.rst' that documents the rkisp1 driver.
>
> Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@xxxxxxxxxxxxx>
> ---
> Documentation/admin-guide/media/rkisp1.dot | 18 +++
> Documentation/admin-guide/media/rkisp1.rst | 147 ++++++++++++++++++
> .../admin-guide/media/v4l-drivers.rst | 1 +
> 3 files changed, 166 insertions(+)
> create mode 100644 Documentation/admin-guide/media/rkisp1.dot
> create mode 100644 Documentation/admin-guide/media/rkisp1.rst
>
> diff --git a/Documentation/admin-guide/media/rkisp1.dot b/Documentation/admin-guide/media/rkisp1.dot
> new file mode 100644
> index 000000000000..54c1953a6130
> --- /dev/null
> +++ b/Documentation/admin-guide/media/rkisp1.dot
> @@ -0,0 +1,18 @@
> +digraph board {
> + rankdir=TB
> + n00000001 [label="{{<port0> 0 | <port1> 1} | rkisp1_isp\n/dev/v4l-subdev0 | {<port2> 2 | <port3> 3}}", shape=Mrecord, style=filled, fillcolor=green]
> + n00000001:port2 -> n00000006:port0
> + n00000001:port2 -> n00000009:port0
> + n00000001:port3 -> n00000014 [style=bold]
> + n00000006 [label="{{<port0> 0} | rkisp1_resizer_mainpath\n/dev/v4l-subdev1 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
> + n00000006:port1 -> n0000000c [style=bold]
> + n00000009 [label="{{<port0> 0} | rkisp1_resizer_selfpath\n/dev/v4l-subdev2 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
> + n00000009:port1 -> n00000010 [style=bold]
> + n0000000c [label="rkisp1_mainpath\n/dev/video0", shape=box, style=filled, fillcolor=yellow]
> + n00000010 [label="rkisp1_selfpath\n/dev/video1", shape=box, style=filled, fillcolor=yellow]
> + n00000014 [label="rkisp1_stats\n/dev/video2", shape=box, style=filled, fillcolor=yellow]
> + n00000018 [label="rkisp1_params\n/dev/video3", shape=box, style=filled, fillcolor=yellow]
> + n00000018 -> n00000001:port1 [style=bold]
> + n0000001c [label="{{} | imx219 4-0010\n/dev/v4l-subdev3 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
> + n0000001c:port0 -> n00000001:port0
> +}
> diff --git a/Documentation/admin-guide/media/rkisp1.rst b/Documentation/admin-guide/media/rkisp1.rst
> new file mode 100644
> index 000000000000..16021e602a93
> --- /dev/null
> +++ b/Documentation/admin-guide/media/rkisp1.rst
> @@ -0,0 +1,147 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +.. include:: <isonum.txt>
> +
> +=========================================
> +Rockchip Image Signal Processor (rkisp1)
> +=========================================
> +
> +Introduction
> +============
> +
> +This file documents the driver for the Rockchip ISP1 that is part of RK3288 and RK3399 SoCs.
> +The driver is located under drivers/staging/media/rkisp1 and uses the Media-Controller API.
> +
> +Topology
> +========
> +.. _rkisp1_topology_graph:
> +
> +.. kernel-figure:: rkisp1.dot
> + :alt: Diagram of the default media pipeline topology
> + :align: center
> +
> +
> +The driver has 4 video devices:
> + - rkisp1_mainpath: capture device for retrieving images, usually in higher resolution.
> + - rkisp1_selfpath: capture device for retrieving images.
> + - rkisp1_stats: a metadata capture device that sends statistics.
> + - rkisp1_params: a metadata output device that receives parameters configurations from userspace.
> +
> +The driver has 3 subdevices:
> + - rkisp1_resizer_mainpath: used to resize and downsample frames for the mainpath capture device.
> + - rkisp1_resizer_selfpath: used to resize and downsample frames for the selfpath capture device.
> + - rkisp1_isp: is connected to the sensor and is responsible for all the isp operations.
> +
> +
> +rkisp1_mainpath, rkisp1_selfpath - Frames Capture Video Nodes
> +-------------------------------------------------------------
> +Those are the `mainpath` and `selfpath` capture devices to capture frames.
> +Those entities are the DMA engines that write the frames to memory.
> +The selfpath video device can capture YUV/RGB formats. Its input is YUV encoded
> +stream and it is able to convert it to RGB. The selfpath in not able to capture bayer formats.
> +The mainpath can capture both bayer and YUV formats but it is not able to capture RGB formats.
> +Both capture videos support the ``V4L2_CAP_IO_MC`` :ref:`capability <device-capabilities>`.
> +
> +
> +rkisp1_resizer_mainpath, rkisp1_resizer_selfpath - Resizers Subdevices Nodes
> +----------------------------------------------------------------------------
> +Those are resizer entities for the mainpath and the selfpath. Those entities can scale the frames up
> +and down and also change the YUV sampling (for example YUV4:2:2 -> YUV4:2:0). They also have
> +cropping capability on the sink pad.
> +The resizers entities can only operate on YUV:4:2:2 format (MEDIA_BUS_FMT_YUYV8_2X8).
> +The mainpath capture device supports capturing video in bayer formats. In that case the resizer
> +of the mainpath is set to 'bypath' mode - it just forward the frame without operating on it.
s/bypath/bypass
> +
> +rkisp1_isp - Image Signal Processing Subdevice Node
> +---------------------------------------------------
> +This is the isp entity. It is connected to the sensor on sink pad 0 and receives the frames using
> +the CSI-2 protocol. It is responsible of configuring the CSI-2 protocol.
> +It has a cropping capability on sink pad 0 that is connected to the sensor and on source pad 2 connected to
> +the resizer entities.
> +Cropping on sink pad 0 defines the image region from the sensor.
> +Cropping on source pad 2 defines the region for the Image Stabilizer (IS).
> +
> +.. _rkisp1_stats:
> +
> +rkisp1_stats - Statistics Video Node
> +------------------------------------
> +The statistics video node outputs the 3A (auto focus, auto exposure and auto white balance) statistics as
s/statistics as/statistics, as
Or maybe:
The rkisp1_stats video node outputs 3A (auto focus, auto exposure and
auto white balance) statistics, and also histogram...
> +well as histogram statistics for the frames that are being processed by the rkisp1 to userspace applications.
> +Applications can use this statistics data to compute the desired algorithm parameters for the rkisp1.
s/this/these
How about:
Using these data, applications can implement algorithms and re-parametrize
the driver through the rkisp_params node to improve image quality during a
video stream.
And we should add a link to the struct used by rkisp1_stats, so userspace
can understand how to read the buffer:
The buffer format is defined by struct :c:type:`rkisp1_stat_buffer`.
> +
> +.. _rkisp1_params:
> +
> +rkisp1_params - Parameters Video Node
> +-------------------------------------
> +The parameters video node receives the rkisp1 algorithm parameters that are used
> +to configure how the rkisp1 algorithms process the image.
"rkisp1 algorithm parameters" -> this is a bit confusing, how about:
The rkisp1_params video node receives a set of parameters from userspace
to be applied to the hardware during a video stream, allowing userspace
to dynamically modify values such as black level, cross talk corrections
and others.
The buffer format is defined by struct :c:type:`rkisp1_stat_buffer`, and
userspace should set :ref:`V4L2_META_FMT_RK_ISP1_PARAMS <v4l2-meta-fmt-params-rkisp1>`
as the pixelformat.
as a side note, maybe we could rename these structs to follow a standard,
maybe node_name_buffer:
rkisp1_stats_buffer
rkisp1_params_buffer
> +
> +Details on processing parameters specific to the rkisp1 can be found in
> +:ref:`v4l2-meta-fmt-params-rkisp1`.
And maybe this phrase could be removed, since there is already a reference
above.
> +
> +
> +Capturing Video Frames Example
> +==============================
> +
> +In the following example, the sensor connected to pad 0 of 'rkisp1_isp' is imx219.
> +
> +The following commands can be used to capture video from the selfpath video node
> +with dimension 900x800 planar format YUV 4:2:2. It uses all cropping capabilities possible,
> +(see explanation right below)
> +
> +.. code-block:: bash
> +
> + # set the links
> + "media-ctl" "-d" "platform:rkisp1" "-r"
> + "media-ctl" "-d" "platform:rkisp1" "-l" "'imx219 4-0010':0 -> 'rkisp1_isp':0 [1]"
> + "media-ctl" "-d" "platform:rkisp1" "-l" "'rkisp1_isp':2 -> 'rkisp1_resizer_selfpath':0 [1]"
> + "media-ctl" "-d" "platform:rkisp1" "-l" "'rkisp1_isp':2 -> 'rkisp1_resizer_mainpath':0 [0]"
> +
> + # set format for imx219 4-0010:0
> + "media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"imx219 4-0010":0 [fmt:SRGGB10_1X10/1640x1232]'
> +
> + # set format for rkisp1_isp pads:
> + "media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"rkisp1_isp":0 [fmt:SRGGB10_1X10/1640x1232 crop: (0,0)/1600x1200]'
> + "media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"rkisp1_isp":2 [fmt:YUYV8_2X8/1600x1200 crop: (0,0)/1500x1100]'
> +
> + # set format for rkisp1_resizer_selfpath pads:
> + "media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"rkisp1_resizer_selfpath":0 [fmt:YUYV8_2X8/1500x1100 crop: (300,400)/1400x1000]'
> + "media-ctl" "-d" "platform:rkisp1" "--set-v4l2" '"rkisp1_resizer_selfpath":1 [fmt:YUYV8_2X8/900x800]'
> +
> + # set format for rkisp1_selfpath:
> + "v4l2-ctl" "-z" "platform:rkisp1" "-d" "rkisp1_selfpath" "-v" "width=900,height=800,"
> + "v4l2-ctl" "-z" "platform:rkisp1" "-d" "rkisp1_selfpath" "-v" "pixelformat=422P"
> +
> + # start streaming:
> + v4l2-ctl "-z" "platform:rkisp1" "-d" "rkisp1_selfpath" "--stream-mmap" "--stream-count" "10"
> +
> +
> +In the above example the sensor is configured to bayer format: `SRGGB10_1X10/1640x1232`.
> +The rkisp1_isp:0 pad should be configured to the same mbus format and dimensions as the sensor.
> +Otherwise streaming will fail with 'EPIPE' error. So it is also configured to
> +`SRGGB10_1X10/1640x1232` . In addition, the rkisp1_isp:0 pad is configured to cropping
s/sensor. Otherwise/sensor, otherwise
s/error. So/error, so
> +`(0,0)/1600x1200`. The cropping dimensions are automatically propagated to be the format of the
> +isp source pad `rkisp1_isp:2`. Another cropping operation is configured on the isp source pad:
> +`(0,0)/1500x1100`.
> +The resizer's sink pad `rkisp1_resizer_selfpath` should be configured to format
> +`YUYV8_2X8/1500x1100` in order to match the format on the other side of the link. In addition a
> +cropping `(300,400)/1400x1000` is configured on it.
> +The source pad of the resizer, `rkisp1_resizer_selfpath:1` is configured to format
> +`YUYV8_2X8/900x800`. That means that the resizer first crop a window of `(300,400)/1400x100` from
> +the received frame and then scales this window to dimension `900x800`.
Maybe we can break this a bit with new lines to be easier to read.
> +
> +Note that the above example does not uses the stats-params control loop.
> +Therefore the capture frames will not go through the 3A algorithms and will look dark and greenish.
This is not entirely true, since, depending on your sensor setup
(and maybe your luck), you can get a fine image.
s/and will look dark and greenish/and probably won't have a good quality, and can even look dark and greenish.
> +
> +Configuring Quantization
> +========================
> +
> +The driver has a special feature to allow userspace to configure full range quantization on
> +YUV formats. To do that, userspace can use the Colorspace Conversion API (CSC API) for subdevices
How about:
This driver supports limited and full range quantization on YUV formats,
where limited is the default.
To switch between on or the other, userspace should use Colorspace
Conversion API (CSC API) ...
> +on source pad 2 of the isp (`rkisp1_isp:2`). The quantization configured on this pad is the
> +quantization of the captured video frames on the mainpath and selfpath video nodes.
> +Note that the resizer and capture entities will always report the default quantization
> +(limited range for YUV formats) even if the quantization is configured to full range on
s/report the default quantization (limited range for YUV formats)/report `V4L2_QUANTIZATION_DEFAULT`/
and also, try to limit lines within 80 chars when possible.
Thanks
Helen
> +`rkisp1_isp:2`. So in order to get the configured quantization, application should get it from
> +pad `rkisp1_isp:2`.
> +
> diff --git a/Documentation/admin-guide/media/v4l-drivers.rst b/Documentation/admin-guide/media/v4l-drivers.rst
> index 251cc4ede0b6..9c7ebe2ca3bd 100644
> --- a/Documentation/admin-guide/media/v4l-drivers.rst
> +++ b/Documentation/admin-guide/media/v4l-drivers.rst
> @@ -25,6 +25,7 @@ Video4Linux (V4L) driver-specific documentation
> philips
> qcom_camss
> rcar-fdp1
> + rkisp1
> saa7134
> si470x
> si4713
>
