Re: [PATCH v4 4/5] arm64: dts: sdm845: Add OPP tables and power-domains for venus

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 7/28/2020 6:22 AM, Stephen Boyd wrote:
Quoting Viresh Kumar (2020-07-27 08:38:06)
On 27-07-20, 17:38, Rajendra Nayak wrote:
On 7/27/2020 11:23 AM, Rajendra Nayak wrote:
On 7/24/2020 7:39 PM, Stanimir Varbanov wrote:
+
+                opp-533000000 {
+                    opp-hz = /bits/ 64 <533000000>;

Is this the highest OPP in table ?

Actually it comes from videocc, where ftbl_video_cc_venus_clk_src
defines 533000000 but the real calculated freq is 533000097.

I still don't quite understand why the videocc driver returns this
frequency despite this not being in the freq table.

Ok, so I see the same issue on sc7180 also. clk_round_rate() does seem to
return whats in the freq table, but clk_set_rate() goes ahead and sets it

I'm happy to see clk_round_rate() return the actual rate that would be
achieved and not just the rate that is in the frequency tables. Would
that fix the problem?

It would, but only if I also update the OPP table to have 533000097
instead of 533000000 (which I guess is needed anyway)
If this is the actual frequency that's achievable, then perhaps even the clock
freq table should have this? 533000097 and not 533000000?
That way clk_round_rate() would return the actual rate that's achieved and
we don't need any extra math. Isn't that the reason these freq tables exist
anyway.

It may be that we need to make clk_round_rate() do
some more math on qcom platforms and actually figure out what the rate
is going to be instead of blindly trust the frequency that has been set
in the tables.

to 533000097. Subsequently when we try to set a different OPP, it fails to
find the 'current' OPP entry for 533000097. This sounds like an issue with the OPP
framework? Should we not fall back to the highest OPP as the current OPP?

Stephen/Viresh, any thoughts?

I think we (in all frameworks generally) try to set a frequency <=
target frequency and so there may be a problem if the frequency is
larger than highest supported. IOW, you need to fix tables a bit.


Rounding is annoying for sure.


--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux