Hello. I recently purchased a CHVIDEOCR conceptronic device, but is not detected in opensuse 11.2 after having compiled and installed the latest v4l-dvb. The vendor and product ID is 1b80:e34e. I tried to make it work with the em28xx module with ID card 9 (not fully recognized) and 19 (system hangs). This is the dmesg output with card = 19. #modprobe em28xx card=19 i2c_scan=0 #echo 1b80 e34e > /sys/bus/usb/drivers/em28xx/new_id [25994.968035] usb 1-6: new high speed USB device using ehci_hcd and address 2 [25995.085408] usb 1-6: New USB device found, idVendor=1b80, idProduct=e34e [25995.085421] usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [25995.085428] usb 1-6: Product: USB 2863 Device [25995.085545] usb 1-6: configuration #1 chosen from 1 choice [26024.365635] usbcore: registered new interface driver em28xx [26024.365649] em28xx driver loaded [26033.874447] em28xx: New device USB 2863 Device @ 480 Mbps (1b80:e34e, interface 0, class 0) [26033.874608] em28xx #0: chip ID is em2860 [26033.973167] em28xx #0: i2c eeprom 00: 1a eb 67 95 80 1b 4e e3 50 00 20 03 6a 20 00 00 [26033.973189] em28xx #0: i2c eeprom 10: 00 00 04 57 06 02 00 00 00 00 00 00 00 00 00 00 [26033.973207] em28xx #0: i2c eeprom 20: 02 00 01 00 f0 00 01 00 00 00 00 00 5b 00 00 00 [26033.973224] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 02 01 00 00 00 00 [26033.973241] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [26033.973258] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [26033.973274] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00 [26033.973291] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 36 00 33 00 20 00 44 00 [26033.973307] em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00 [26033.973324] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [26033.973340] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [26033.973357] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [26033.973373] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [26033.973390] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [26033.973406] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [26033.973422] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [26033.973440] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x559a2440 [26033.973446] em28xx #0: EEPROM info: [26033.973451] em28xx #0: AC97 audio (5 sample rates) [26033.973456] em28xx #0: 500mA max power [26033.973462] em28xx #0: Table at 0x04, strings=0x206a, 0x0000, 0x0000 [26033.974539] em28xx #0: Identified as EM2860/SAA711X Reference Design (card=19) [26033.974549] em28xx #0: Registering snapshot button... [26033.974609] input: em28xx snapshot button as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/input/input7 [26034.209521] saa7115 4-0025: saa7113 found (1f7113d0e100000) @ 0x4a (em28xx #0) [26034.581286] em28xx #0: Config register raw data: 0x50 [26034.595147] em28xx #0: AC97 vendor ID = 0xffffffff [26034.601396] em28xx #0: AC97 features = 0x6a90 [26034.601404] em28xx #0: Empia 202 AC97 audio processor detected [26034.848010] em28xx #0: v4l2 driver version 0.1.2 [26035.320116] em28xx #0: V4L2 video device registered as video1 [26035.320127] em28xx #0: V4L2 VBI device registered as vbi1 [26035.376728] em28xx-audio.c: probing for em28x1 non standard usbaudio [26035.376740] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [26035.377123] Em28xx: Initialized (Em28xx Audio Extension) extension I opened the device and these are its components: - usb video capture EM2862 - Single chip dual channel AC'97 EMP202 - NXP SAA7113H decoder. Can you help me? Thanks -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
