This reverts commit bc52d6eb44de8f19934768d4d10d19fdbdc99950. On newer kernels, a saa7134 board stopped to display TV video output properly. After a bisect, I found it as the commit causing the issue. Turns out that v4l_bound_align_image isn't doing the same bounding calculation as manually done previously in saa7134_try_fmt_vid_cap. What isn't equal is the calculation done in clamp align, while previously it did "f->fmt.pix.width &= ~0x03", clamp_align function does "Round to nearest aligned value" as stated in the comment, which yields a different result. If I comment the round calculation in clamp_align like this: "x = (x /*+ (1 << (align - 1))*/) & mask", I get it fixed too, because this way the calculation is the same then. Signed-off-by: Herton Ronaldo Krzesinski <herton@xxxxxxxxxxxxxxx> --- drivers/media/video/saa7134/saa7134-video.c | 11 +++++++++-- 1 files changed, 9 insertions(+), 2 deletions(-) Probaly this should be sent to stable as well (>= 2.6.31) diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c index ba87128..e305c16 100644 --- a/drivers/media/video/saa7134/saa7134-video.c +++ b/drivers/media/video/saa7134/saa7134-video.c @@ -1640,8 +1640,15 @@ static int saa7134_try_fmt_vid_cap(struct file *file, void *priv, } f->fmt.pix.field = field; - v4l_bound_align_image(&f->fmt.pix.width, 48, maxw, 2, - &f->fmt.pix.height, 32, maxh, 0, 0); + if (f->fmt.pix.width < 48) + f->fmt.pix.width = 48; + if (f->fmt.pix.height < 32) + f->fmt.pix.height = 32; + if (f->fmt.pix.width > maxw) + f->fmt.pix.width = maxw; + if (f->fmt.pix.height > maxh) + f->fmt.pix.height = maxh; + f->fmt.pix.width &= ~0x03; f->fmt.pix.bytesperline = (f->fmt.pix.width * fmt->depth) >> 3; f->fmt.pix.sizeimage = -- 1.6.6 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
