[PATCH v3 07/10] media: staging: rkisp1: rsz: enumerate the formats on the src pad according to the capture

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Currently the resizer outputs the same media bus format
as the input. This is wrong since the resizer is also used
to downscale YUV formats. This patch changes the enumeration
of the supported formats. The supported formats on the sink pad
should be taken from the isp entity and the supported formats on
the source pad should be taken from the capture entity.

Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@xxxxxxxxxxxxx>
---
 drivers/staging/media/rkisp1/rkisp1-resizer.c | 41 ++++++++++++-------
 1 file changed, 26 insertions(+), 15 deletions(-)

diff --git a/drivers/staging/media/rkisp1/rkisp1-resizer.c b/drivers/staging/media/rkisp1/rkisp1-resizer.c
index 066d22096a7d..4e87c6f3f732 100644
--- a/drivers/staging/media/rkisp1/rkisp1-resizer.c
+++ b/drivers/staging/media/rkisp1/rkisp1-resizer.c
@@ -433,24 +433,35 @@ static int rkisp1_rsz_enum_mbus_code(struct v4l2_subdev *sd,
 {
 	struct rkisp1_resizer *rsz =
 		container_of(sd, struct rkisp1_resizer, sd);
-	struct v4l2_subdev_pad_config dummy_cfg;
-	u32 pad = code->pad;
 	int ret;
 
-	if (rsz->id == RKISP1_SELFPATH) {
-		if (code->index > 0)
-			return -EINVAL;
-		code->code = MEDIA_BUS_FMT_YUYV8_2X8;
-		return 0;
+	/* supported mbus codes on the sink pad are the same as isp src pad */
+	if (code->pad == RKISP1_RSZ_PAD_SINK) {
+		struct v4l2_subdev_pad_config dummy_cfg;
+		u32 pad = code->pad;
+
+		/*
+		 * the sp capture doesn't support bayer formats so the sp resizer
+		 * supports only yuv422
+		 */
+		if (rsz->id == RKISP1_SELFPATH) {
+			if (code->index > 0)
+				return -EINVAL;
+			code->code = MEDIA_BUS_FMT_YUYV8_2X8;
+			return 0;
+		}
+		code->pad = RKISP1_ISP_PAD_SOURCE_VIDEO;
+		ret = v4l2_subdev_call(&rsz->rkisp1->isp.sd, pad, enum_mbus_code,
+				       &dummy_cfg, code);
+
+		/* restore pad */
+		code->pad = pad;
+	} else {
+		/* supported mbus codes on the src are the same as in the capture */
+		struct rkisp1_capture *cap = &rsz->rkisp1->capture_devs[rsz->id];
+
+		ret = rkisp1_cap_enum_mbus_codes(cap, code);
 	}
-
-	/* supported mbus codes are the same in isp video src pad */
-	code->pad = RKISP1_ISP_PAD_SOURCE_VIDEO;
-	ret = v4l2_subdev_call(&rsz->rkisp1->isp.sd, pad, enum_mbus_code,
-			       &dummy_cfg, code);
-
-	/* restore pad */
-	code->pad = pad;
 	return ret;
 }
 
-- 
2.17.1




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux