Implement the newly introduced get_mbus_config operation to report the
number of currently used data lanes on the MIPI CSI-2 interface.
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
---
drivers/media/i2c/adv748x/adv748x-csi2.c | 31 ++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c
index 2091cda50935..99bb63d05eef 100644
--- a/drivers/media/i2c/adv748x/adv748x-csi2.c
+++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
@@ -214,9 +214,40 @@ static int adv748x_csi2_set_format(struct v4l2_subdev *sd,
return ret;
}
+static int adv748x_csi2_get_mbus_config(struct v4l2_subdev *sd, unsigned int pad,
+ struct v4l2_mbus_config *config)
+{
+ struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd);
+
+ if (pad != ADV748X_CSI2_SOURCE)
+ return -EINVAL;
+
+ config->type = V4L2_MBUS_CSI2_DPHY;
+ switch (tx->active_lanes) {
+ case 1:
+ config->flags = V4L2_MBUS_CSI2_1_LANE;
+ break;
+
+ case 2:
+ config->flags = V4L2_MBUS_CSI2_2_LANE;
+ break;
+
+ case 3:
+ config->flags = V4L2_MBUS_CSI2_3_LANE;
+ break;
+
+ case 4:
+ config->flags = V4L2_MBUS_CSI2_4_LANE;
+ break;
+ }
+
+ return 0;
+}
+
static const struct v4l2_subdev_pad_ops adv748x_csi2_pad_ops = {
.get_fmt = adv748x_csi2_get_format,
.set_fmt = adv748x_csi2_set_format,
+ .get_mbus_config = adv748x_csi2_get_mbus_config,
};
/* -----------------------------------------------------------------------------
--
2.27.0
