Re: [PATCH 2/8] dt-bindings: media: ov5645: Convert to json-schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jacopo, 

On 15 July 2020 7:39:45 PM IST, Jacopo Mondi <jacopo+renesas@xxxxxxxxxx> wrote:
>Convert the ov5645 bindings document to json-schema and update
>the MAINTAINERS file accordingly, as the entry was not documented.
>
>Add myself as maintainer for odd fixes only, as I don't have the
>sensor to test with.
>
>Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
>---
>
>Hello Todor, Manivannan
>   I've added in this patch an entry for ov5645 in the MAINTAINERS
>file, and I've added myself as maintainers for Odd Fixes only.
>
>As you seem to be the author and committers of this bindings
>respectively,
>would you be interested in maintaining this driver ?

I've worked on this driver in the past. So yeah, feel free to add myself and since Todor has authored the driver, it makes sense to add him too. 

Thanks, 
Mani

>
>---
> .../devicetree/bindings/media/i2c/ov5645.txt  |  54 --------
> .../devicetree/bindings/media/i2c/ov5645.yaml | 123 ++++++++++++++++++
> MAINTAINERS                                   |   8 ++
> 3 files changed, 131 insertions(+), 54 deletions(-)
>delete mode 100644
>Documentation/devicetree/bindings/media/i2c/ov5645.txt
>create mode 100644
>Documentation/devicetree/bindings/media/i2c/ov5645.yaml
>
>diff --git a/Documentation/devicetree/bindings/media/i2c/ov5645.txt
>b/Documentation/devicetree/bindings/media/i2c/ov5645.txt
>deleted file mode 100644
>index 72ad992f77be..000000000000
>--- a/Documentation/devicetree/bindings/media/i2c/ov5645.txt
>+++ /dev/null
>@@ -1,54 +0,0 @@
>-* Omnivision 1/4-Inch 5Mp CMOS Digital Image Sensor
>-
>-The Omnivision OV5645 is a 1/4-Inch CMOS active pixel digital image
>sensor with
>-an active array size of 2592H x 1944V. It is programmable through a
>serial I2C
>-interface.
>-
>-Required Properties:
>-- compatible: Value should be "ovti,ov5645".
>-- clocks: Reference to the xclk clock.
>-- clock-names: Should be "xclk".
>-- clock-frequency: Frequency of the xclk clock.
>-- enable-gpios: Chip enable GPIO. Polarity is GPIO_ACTIVE_HIGH. This
>corresponds
>-  to the hardware pin PWDNB which is physically active low.
>-- reset-gpios: Chip reset GPIO. Polarity is GPIO_ACTIVE_LOW. This
>corresponds to
>-  the hardware pin RESETB.
>-- vdddo-supply: Chip digital IO regulator.
>-- vdda-supply: Chip analog regulator.
>-- vddd-supply: Chip digital core regulator.
>-
>-The device node must contain one 'port' child node for its digital
>output
>-video port, in accordance with the video interface bindings defined in
>-Documentation/devicetree/bindings/media/video-interfaces.txt.
>-
>-Example:
>-
>-	&i2c1 {
>-		...
>-
>-		ov5645: ov5645@3c {
>-			compatible = "ovti,ov5645";
>-			reg = <0x3c>;
>-
>-			enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
>-			reset-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
>-			pinctrl-names = "default";
>-			pinctrl-0 = <&camera_rear_default>;
>-
>-			clocks = <&clks 200>;
>-			clock-names = "xclk";
>-			clock-frequency = <24000000>;
>-
>-			vdddo-supply = <&camera_dovdd_1v8>;
>-			vdda-supply = <&camera_avdd_2v8>;
>-			vddd-supply = <&camera_dvdd_1v2>;
>-
>-			port {
>-				ov5645_ep: endpoint {
>-					clock-lanes = <1>;
>-					data-lanes = <0 2>;
>-					remote-endpoint = <&csi0_ep>;
>-				};
>-			};
>-		};
>-	};
>diff --git a/Documentation/devicetree/bindings/media/i2c/ov5645.yaml
>b/Documentation/devicetree/bindings/media/i2c/ov5645.yaml
>new file mode 100644
>index 000000000000..ff52d0fffb74
>--- /dev/null
>+++ b/Documentation/devicetree/bindings/media/i2c/ov5645.yaml
>@@ -0,0 +1,123 @@
>+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>+%YAML 1.2
>+---
>+$id: http://devicetree.org/schemas/media/i2c/ov5645.yaml#
>+$schema: http://devicetree.org/meta-schemas/core.yaml#
>+
>+title: Omnivision OV5645 1/4 Inch 5Mp CMOS Digital Image Sensor
>+
>+maintainers:
>+  - Jacopo Mondi <jacopo@xxxxxxxxxx>
>+
>+description: -|
>+  The Omnivision OV5645 is a 1/4-Inch CMOS active pixel digital image
>sensor
>+  with an active array size of 2592H x 1944V. It is programmable
>through a
>+  serial I2C interface.
>+
>+properties:
>+  compatible:
>+    const: ovti,ov5645
>+
>+  reg:
>+    description: I2C device address
>+    maxItems: 1
>+
>+  clocks:
>+    description: Reference to the xclk clock.
>+    maxItems: 1
>+
>+  clock-names:
>+    description: Should be "xclk".
>+    maxItems: 1
>+
>+  clock-frequency:
>+    description: Frequency of the xclk clock.
>+
>+  enable-gpios:
>+    description: |
>+      Chip enable GPIO. Polarity is GPIO_ACTIVE_HIGH. This corresponds
>+      to the hardware pin PWDNB which is physically active low.
>+    maxItems: 1
>+
>+  reset-gpios:
>+    description: |
>+      Chip reset GPIO. Polarity is GPIO_ACTIVE_LOW. This corresponds
>to
>+      the hardware pin RESETB.
>+    maxItems: 1
>+
>+  vdddo-supply:
>+    description: Chip digital IO regulator.
>+    maxItems: 1
>+
>+  vdda-supply:
>+    description: Chip analog regulator.
>+    maxItems: 1
>+
>+  vddd-supply:
>+    description: Chip digital core regulator.
>+    maxItems: 1
>+
>+  port:
>+    type: object
>+    description: |
>+      The device node must contain one 'port' child node for its
>digital output
>+      video port, in accordance with the video interface bindings
>defined in
>+      Documentation/devicetree/bindings/media/video-interfaces.txt.
>+
>+    properties:
>+      endpoint:
>+        type: object
>+        properties:
>+          remote-endpoint:
>+            description: A phandle to the bus receiver's endpoint
>node.
>+
>+        required:
>+          - remote-endpoint
>+
>+    additionalProperties: false
>+
>+required:
>+  - compatible
>+  - reg
>+  - clocks
>+  - clock-names
>+  - clock-frequency
>+  - vdddo-supply
>+  - vdda-supply
>+  - vddd-supply
>+  - port
>+
>+examples:
>+  - |
>+    #include <dt-bindings/gpio/gpio.h>
>+
>+    i2c0 {
>+        #address-cells = <1>;
>+        #size-cells = <0>;
>+
>+        camera@3c {
>+            compatible = "ovti,ov5645";
>+            reg = <0x3c>;
>+
>+            enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
>+            reset-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
>+
>+            clocks = <&clks 200>;
>+            clock-names = "xclk";
>+            clock-frequency = <24000000>;
>+
>+            vdddo-supply = <&camera_dovdd_1v8>;
>+            vdda-supply = <&camera_avdd_2v8>;
>+            vddd-supply = <&camera_dvdd_1v2>;
>+
>+            port {
>+                ov5645_ep: endpoint {
>+                    clock-lanes = <1>;
>+                    data-lanes = <0 2>;
>+                    remote-endpoint = <&csi0_ep>;
>+                };
>+            };
>+        };
>+    };
>+
>+...
>diff --git a/MAINTAINERS b/MAINTAINERS
>index 0160d7567ed3..bf8902ebbe30 100644
>--- a/MAINTAINERS
>+++ b/MAINTAINERS
>@@ -12607,6 +12607,14 @@ T:	git git://linuxtv.org/media_tree.git
> F:	drivers/media/i2c/ov5640.c
> F:	Documentation/devicetree/bindings/media/i2c/ov5640.yaml
>
>+OMNIVISION OV5645 SENSOR DRIVER
>+M:	Jacopo Mondi <jacopo@xxxxxxxxxx>
>+L:	linux-media@xxxxxxxxxxxxxxx
>+S:	Odd Fixes
>+T:	git git://linuxtv.org/media_tree.git
>+F:	drivers/media/i2c/ov5645.c
>+F:	Documentation/devicetree/bindings/media/i2c/ov5645.yaml
>+
> OMNIVISION OV5647 SENSOR DRIVER
> M:	Jacopo Mondi <jacopo@xxxxxxxxxx>
> M:	Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
>--
>2.27.0

-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux