Re: [PATCH 01/25] dma-fence: basic lockdep annotations

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jul 8, 2020 at 5:19 PM Alex Deucher <alexdeucher@xxxxxxxxx> wrote:
>
> On Wed, Jul 8, 2020 at 11:13 AM Daniel Vetter <daniel.vetter@xxxxxxxx> wrote:
> >
> > On Wed, Jul 8, 2020 at 4:57 PM Christian König <christian.koenig@xxxxxxx> wrote:
> > >
> > > Could we merge this controlled by a separate config option?
> > >
> > > This way we could have the checks upstream without having to fix all the
> > > stuff before we do this?
> >
> > Since it's fully opt-in annotations nothing blows up if we don't merge
> > any annotations. So we could start merging the first 3 patches. After
> > that the fun starts ...
> >
> > My rough idea was that first I'd try to tackle display, thus far
> > there's 2 actual issues in drivers:
> > - amdgpu has some dma_resv_lock in commit_tail, plus a kmalloc. I
> > think those should be fairly easy to fix (I'd try a stab at them even)
> > - vmwgfx has a full on locking inversion with dma_resv_lock in
> > commit_tail, and that one is functional. Not just reading something
> > which we can safely assume to be invariant anyway (like the tmz flag
> > for amdgpu, or whatever it was).
> >
> > I've done a pile more annotations patches for other atomic drivers
> > now, so hopefully that flushes out any remaining offenders here. Since
> > some of the annotations are in helper code worst case we might need a
> > dev->mode_config.broken_atomic_commit flag to disable them. At least
> > for now I have 0 plans to merge any of these while there's known
> > unsolved issues. Maybe if some drivers take forever to get fixed we
> > can then apply some duct-tape for the atomic helper annotation patch.
> > Instead of a flag we can also copypasta the atomic_commit_tail hook,
> > leaving the annotations out and adding a huge warning about that.
> >
> > Next big chunk is the drm/scheduler annotations:
> > - amdgpu needs a full rework of display reset (but apparently in the works)
>
> I think the display deadlock issues should be fixed in:
> https://cgit.freedesktop.org/drm/drm/commit/?id=cdaae8371aa9d4ea1648a299b1a75946b9556944

That's the reset/tdr inversion, there's two more:
- kmalloc, see https://cgit.freedesktop.org/~danvet/drm/commit/?id=d9353cc3bf6111430a24188b92412dc49e7ead79
- ttm_bo_reserve in the wrong place
https://cgit.freedesktop.org/~danvet/drm/commit/?id=a6c03176152625a2f9cf1e499aceb8b2217dc2a2
- console_lock in the wrong spot
https://cgit.freedesktop.org/~danvet/drm/commit/?id=a6c03176152625a2f9cf1e499aceb8b2217dc2a2

Especially the last one I have no idea how to address really.
-Daniel


>
> Alex
>
> > - I read all the drivers, they all have the fairly cosmetic issue of
> > doing small allocations in their callbacks.
> >
> > I might end up typing the mempool we need for the latter issue, but
> > first still hoping for some actual test feedback from other drivers
> > using drm/scheduler. Again no intentions of merging these annotations
> > without the drivers being fixed first, or at least some duct-atpe
> > applied.
> >
> > Another option I've been thinking about, if there's cases where fixing
> > things properly is a lot of effort: We could do annotations for broken
> > sections (just the broken part, so we still catch bugs everywhere
> > else). They'd simply drop&reacquire the lock. We could then e.g. use
> > that in the amdgpu display reset code, and so still make sure that
> > everything else in reset doesn't get worse. But I think adding that
> > shouldn't be our first option.
> >
> > I'm not personally a big fan of the Kconfig or runtime option, only
> > upsets people since it breaks lockdep for them. Or they ignore it, and
> > we don't catch bugs, making it fairly pointless to merge.
> >
> > Cheers, Daniel
> >
> >
> > >
> > > Thanks,
> > > Christian.
> > >
> > > Am 07.07.20 um 22:12 schrieb Daniel Vetter:
> > > > Design is similar to the lockdep annotations for workers, but with
> > > > some twists:
> > > >
> > > > - We use a read-lock for the execution/worker/completion side, so that
> > > >    this explicit annotation can be more liberally sprinkled around.
> > > >    With read locks lockdep isn't going to complain if the read-side
> > > >    isn't nested the same way under all circumstances, so ABBA deadlocks
> > > >    are ok. Which they are, since this is an annotation only.
> > > >
> > > > - We're using non-recursive lockdep read lock mode, since in recursive
> > > >    read lock mode lockdep does not catch read side hazards. And we
> > > >    _very_ much want read side hazards to be caught. For full details of
> > > >    this limitation see
> > > >
> > > >    commit e91498589746065e3ae95d9a00b068e525eec34f
> > > >    Author: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
> > > >    Date:   Wed Aug 23 13:13:11 2017 +0200
> > > >
> > > >        locking/lockdep/selftests: Add mixed read-write ABBA tests
> > > >
> > > > - To allow nesting of the read-side explicit annotations we explicitly
> > > >    keep track of the nesting. lock_is_held() allows us to do that.
> > > >
> > > > - The wait-side annotation is a write lock, and entirely done within
> > > >    dma_fence_wait() for everyone by default.
> > > >
> > > > - To be able to freely annotate helper functions I want to make it ok
> > > >    to call dma_fence_begin/end_signalling from soft/hardirq context.
> > > >    First attempt was using the hardirq locking context for the write
> > > >    side in lockdep, but this forces all normal spinlocks nested within
> > > >    dma_fence_begin/end_signalling to be spinlocks. That bollocks.
> > > >
> > > >    The approach now is to simple check in_atomic(), and for these cases
> > > >    entirely rely on the might_sleep() check in dma_fence_wait(). That
> > > >    will catch any wrong nesting against spinlocks from soft/hardirq
> > > >    contexts.
> > > >
> > > > The idea here is that every code path that's critical for eventually
> > > > signalling a dma_fence should be annotated with
> > > > dma_fence_begin/end_signalling. The annotation ideally starts right
> > > > after a dma_fence is published (added to a dma_resv, exposed as a
> > > > sync_file fd, attached to a drm_syncobj fd, or anything else that
> > > > makes the dma_fence visible to other kernel threads), up to and
> > > > including the dma_fence_wait(). Examples are irq handlers, the
> > > > scheduler rt threads, the tail of execbuf (after the corresponding
> > > > fences are visible), any workers that end up signalling dma_fences and
> > > > really anything else. Not annotated should be code paths that only
> > > > complete fences opportunistically as the gpu progresses, like e.g.
> > > > shrinker/eviction code.
> > > >
> > > > The main class of deadlocks this is supposed to catch are:
> > > >
> > > > Thread A:
> > > >
> > > >       mutex_lock(A);
> > > >       mutex_unlock(A);
> > > >
> > > >       dma_fence_signal();
> > > >
> > > > Thread B:
> > > >
> > > >       mutex_lock(A);
> > > >       dma_fence_wait();
> > > >       mutex_unlock(A);
> > > >
> > > > Thread B is blocked on A signalling the fence, but A never gets around
> > > > to that because it cannot acquire the lock A.
> > > >
> > > > Note that dma_fence_wait() is allowed to be nested within
> > > > dma_fence_begin/end_signalling sections. To allow this to happen the
> > > > read lock needs to be upgraded to a write lock, which means that any
> > > > other lock is acquired between the dma_fence_begin_signalling() call and
> > > > the call to dma_fence_wait(), and still held, this will result in an
> > > > immediate lockdep complaint. The only other option would be to not
> > > > annotate such calls, defeating the point. Therefore these annotations
> > > > cannot be sprinkled over the code entirely mindless to avoid false
> > > > positives.
> > > >
> > > > Originally I hope that the cross-release lockdep extensions would
> > > > alleviate the need for explicit annotations:
> > > >
> > > > https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Flwn.net%2FArticles%2F709849%2F&amp;data=02%7C01%7Cchristian.koenig%40amd.com%7Cff1a9dd17c544534eeb808d822b21ba2%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637297495649621566&amp;sdata=pbDwf%2BAG1UZ5bLZeep7VeGVQMnlQhX0TKG1d6Ok8GfQ%3D&amp;reserved=0
> > > >
> > > > But there's a few reasons why that's not an option:
> > > >
> > > > - It's not happening in upstream, since it got reverted due to too
> > > >    many false positives:
> > > >
> > > >       commit e966eaeeb623f09975ef362c2866fae6f86844f9
> > > >       Author: Ingo Molnar <mingo@xxxxxxxxxx>
> > > >       Date:   Tue Dec 12 12:31:16 2017 +0100
> > > >
> > > >           locking/lockdep: Remove the cross-release locking checks
> > > >
> > > >           This code (CONFIG_LOCKDEP_CROSSRELEASE=y and CONFIG_LOCKDEP_COMPLETIONS=y),
> > > >           while it found a number of old bugs initially, was also causing too many
> > > >           false positives that caused people to disable lockdep - which is arguably
> > > >           a worse overall outcome.
> > > >
> > > > - cross-release uses the complete() call to annotate the end of
> > > >    critical sections, for dma_fence that would be dma_fence_signal().
> > > >    But we do not want all dma_fence_signal() calls to be treated as
> > > >    critical, since many are opportunistic cleanup of gpu requests. If
> > > >    these get stuck there's still the main completion interrupt and
> > > >    workers who can unblock everyone. Automatically annotating all
> > > >    dma_fence_signal() calls would hence cause false positives.
> > > >
> > > > - cross-release had some educated guesses for when a critical section
> > > >    starts, like fresh syscall or fresh work callback. This would again
> > > >    cause false positives without explicit annotations, since for
> > > >    dma_fence the critical sections only starts when we publish a fence.
> > > >
> > > > - Furthermore there can be cases where a thread never does a
> > > >    dma_fence_signal, but is still critical for reaching completion of
> > > >    fences. One example would be a scheduler kthread which picks up jobs
> > > >    and pushes them into hardware, where the interrupt handler or
> > > >    another completion thread calls dma_fence_signal(). But if the
> > > >    scheduler thread hangs, then all the fences hang, hence we need to
> > > >    manually annotate it. cross-release aimed to solve this by chaining
> > > >    cross-release dependencies, but the dependency from scheduler thread
> > > >    to the completion interrupt handler goes through hw where
> > > >    cross-release code can't observe it.
> > > >
> > > > In short, without manual annotations and careful review of the start
> > > > and end of critical sections, cross-relese dependency tracking doesn't
> > > > work. We need explicit annotations.
> > > >
> > > > v2: handle soft/hardirq ctx better against write side and dont forget
> > > > EXPORT_SYMBOL, drivers can't use this otherwise.
> > > >
> > > > v3: Kerneldoc.
> > > >
> > > > v4: Some spelling fixes from Mika
> > > >
> > > > v5: Amend commit message to explain in detail why cross-release isn't
> > > > the solution.
> > > >
> > > > v6: Pull out misplaced .rst hunk.
> > > >
> > > > Cc: Felix Kuehling <Felix.Kuehling@xxxxxxx>
> > > > Reviewed-by: Thomas Hellström <thomas.hellstrom@xxxxxxxxx>
> > > > Reviewed-by: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
> > > > Cc: Mika Kuoppala <mika.kuoppala@xxxxxxxxx>
> > > > Cc: Thomas Hellstrom <thomas.hellstrom@xxxxxxxxx>
> > > > Cc: linux-media@xxxxxxxxxxxxxxx
> > > > Cc: linaro-mm-sig@xxxxxxxxxxxxxxxx
> > > > Cc: linux-rdma@xxxxxxxxxxxxxxx
> > > > Cc: amd-gfx@xxxxxxxxxxxxxxxxxxxxx
> > > > Cc: intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> > > > Cc: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
> > > > Cc: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
> > > > Cc: Christian König <christian.koenig@xxxxxxx>
> > > > Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxxx>
> > > > ---
> > > >   Documentation/driver-api/dma-buf.rst |   6 +
> > > >   drivers/dma-buf/dma-fence.c          | 161 +++++++++++++++++++++++++++
> > > >   include/linux/dma-fence.h            |  12 ++
> > > >   3 files changed, 179 insertions(+)
> > > >
> > > > diff --git a/Documentation/driver-api/dma-buf.rst b/Documentation/driver-api/dma-buf.rst
> > > > index 7fb7b661febd..05d856131140 100644
> > > > --- a/Documentation/driver-api/dma-buf.rst
> > > > +++ b/Documentation/driver-api/dma-buf.rst
> > > > @@ -133,6 +133,12 @@ DMA Fences
> > > >   .. kernel-doc:: drivers/dma-buf/dma-fence.c
> > > >      :doc: DMA fences overview
> > > >
> > > > +DMA Fence Signalling Annotations
> > > > +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > > +
> > > > +.. kernel-doc:: drivers/dma-buf/dma-fence.c
> > > > +   :doc: fence signalling annotation
> > > > +
> > > >   DMA Fences Functions Reference
> > > >   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > >
> > > > diff --git a/drivers/dma-buf/dma-fence.c b/drivers/dma-buf/dma-fence.c
> > > > index 656e9ac2d028..0005bc002529 100644
> > > > --- a/drivers/dma-buf/dma-fence.c
> > > > +++ b/drivers/dma-buf/dma-fence.c
> > > > @@ -110,6 +110,160 @@ u64 dma_fence_context_alloc(unsigned num)
> > > >   }
> > > >   EXPORT_SYMBOL(dma_fence_context_alloc);
> > > >
> > > > +/**
> > > > + * DOC: fence signalling annotation
> > > > + *
> > > > + * Proving correctness of all the kernel code around &dma_fence through code
> > > > + * review and testing is tricky for a few reasons:
> > > > + *
> > > > + * * It is a cross-driver contract, and therefore all drivers must follow the
> > > > + *   same rules for lock nesting order, calling contexts for various functions
> > > > + *   and anything else significant for in-kernel interfaces. But it is also
> > > > + *   impossible to test all drivers in a single machine, hence brute-force N vs.
> > > > + *   N testing of all combinations is impossible. Even just limiting to the
> > > > + *   possible combinations is infeasible.
> > > > + *
> > > > + * * There is an enormous amount of driver code involved. For render drivers
> > > > + *   there's the tail of command submission, after fences are published,
> > > > + *   scheduler code, interrupt and workers to process job completion,
> > > > + *   and timeout, gpu reset and gpu hang recovery code. Plus for integration
> > > > + *   with core mm with have &mmu_notifier, respectively &mmu_interval_notifier,
> > > > + *   and &shrinker. For modesetting drivers there's the commit tail functions
> > > > + *   between when fences for an atomic modeset are published, and when the
> > > > + *   corresponding vblank completes, including any interrupt processing and
> > > > + *   related workers. Auditing all that code, across all drivers, is not
> > > > + *   feasible.
> > > > + *
> > > > + * * Due to how many other subsystems are involved and the locking hierarchies
> > > > + *   this pulls in there is extremely thin wiggle-room for driver-specific
> > > > + *   differences. &dma_fence interacts with almost all of the core memory
> > > > + *   handling through page fault handlers via &dma_resv, dma_resv_lock() and
> > > > + *   dma_resv_unlock(). On the other side it also interacts through all
> > > > + *   allocation sites through &mmu_notifier and &shrinker.
> > > > + *
> > > > + * Furthermore lockdep does not handle cross-release dependencies, which means
> > > > + * any deadlocks between dma_fence_wait() and dma_fence_signal() can't be caught
> > > > + * at runtime with some quick testing. The simplest example is one thread
> > > > + * waiting on a &dma_fence while holding a lock::
> > > > + *
> > > > + *     lock(A);
> > > > + *     dma_fence_wait(B);
> > > > + *     unlock(A);
> > > > + *
> > > > + * while the other thread is stuck trying to acquire the same lock, which
> > > > + * prevents it from signalling the fence the previous thread is stuck waiting
> > > > + * on::
> > > > + *
> > > > + *     lock(A);
> > > > + *     unlock(A);
> > > > + *     dma_fence_signal(B);
> > > > + *
> > > > + * By manually annotating all code relevant to signalling a &dma_fence we can
> > > > + * teach lockdep about these dependencies, which also helps with the validation
> > > > + * headache since now lockdep can check all the rules for us::
> > > > + *
> > > > + *    cookie = dma_fence_begin_signalling();
> > > > + *    lock(A);
> > > > + *    unlock(A);
> > > > + *    dma_fence_signal(B);
> > > > + *    dma_fence_end_signalling(cookie);
> > > > + *
> > > > + * For using dma_fence_begin_signalling() and dma_fence_end_signalling() to
> > > > + * annotate critical sections the following rules need to be observed:
> > > > + *
> > > > + * * All code necessary to complete a &dma_fence must be annotated, from the
> > > > + *   point where a fence is accessible to other threads, to the point where
> > > > + *   dma_fence_signal() is called. Un-annotated code can contain deadlock issues,
> > > > + *   and due to the very strict rules and many corner cases it is infeasible to
> > > > + *   catch these just with review or normal stress testing.
> > > > + *
> > > > + * * &struct dma_resv deserves a special note, since the readers are only
> > > > + *   protected by rcu. This means the signalling critical section starts as soon
> > > > + *   as the new fences are installed, even before dma_resv_unlock() is called.
> > > > + *
> > > > + * * The only exception are fast paths and opportunistic signalling code, which
> > > > + *   calls dma_fence_signal() purely as an optimization, but is not required to
> > > > + *   guarantee completion of a &dma_fence. The usual example is a wait IOCTL
> > > > + *   which calls dma_fence_signal(), while the mandatory completion path goes
> > > > + *   through a hardware interrupt and possible job completion worker.
> > > > + *
> > > > + * * To aid composability of code, the annotations can be freely nested, as long
> > > > + *   as the overall locking hierarchy is consistent. The annotations also work
> > > > + *   both in interrupt and process context. Due to implementation details this
> > > > + *   requires that callers pass an opaque cookie from
> > > > + *   dma_fence_begin_signalling() to dma_fence_end_signalling().
> > > > + *
> > > > + * * Validation against the cross driver contract is implemented by priming
> > > > + *   lockdep with the relevant hierarchy at boot-up. This means even just
> > > > + *   testing with a single device is enough to validate a driver, at least as
> > > > + *   far as deadlocks with dma_fence_wait() against dma_fence_signal() are
> > > > + *   concerned.
> > > > + */
> > > > +#ifdef CONFIG_LOCKDEP
> > > > +struct lockdep_map   dma_fence_lockdep_map = {
> > > > +     .name = "dma_fence_map"
> > > > +};
> > > > +
> > > > +/**
> > > > + * dma_fence_begin_signalling - begin a critical DMA fence signalling section
> > > > + *
> > > > + * Drivers should use this to annotate the beginning of any code section
> > > > + * required to eventually complete &dma_fence by calling dma_fence_signal().
> > > > + *
> > > > + * The end of these critical sections are annotated with
> > > > + * dma_fence_end_signalling().
> > > > + *
> > > > + * Returns:
> > > > + *
> > > > + * Opaque cookie needed by the implementation, which needs to be passed to
> > > > + * dma_fence_end_signalling().
> > > > + */
> > > > +bool dma_fence_begin_signalling(void)
> > > > +{
> > > > +     /* explicitly nesting ... */
> > > > +     if (lock_is_held_type(&dma_fence_lockdep_map, 1))
> > > > +             return true;
> > > > +
> > > > +     /* rely on might_sleep check for soft/hardirq locks */
> > > > +     if (in_atomic())
> > > > +             return true;
> > > > +
> > > > +     /* ... and non-recursive readlock */
> > > > +     lock_acquire(&dma_fence_lockdep_map, 0, 0, 1, 1, NULL, _RET_IP_);
> > > > +
> > > > +     return false;
> > > > +}
> > > > +EXPORT_SYMBOL(dma_fence_begin_signalling);
> > > > +
> > > > +/**
> > > > + * dma_fence_end_signalling - end a critical DMA fence signalling section
> > > > + *
> > > > + * Closes a critical section annotation opened by dma_fence_begin_signalling().
> > > > + */
> > > > +void dma_fence_end_signalling(bool cookie)
> > > > +{
> > > > +     if (cookie)
> > > > +             return;
> > > > +
> > > > +     lock_release(&dma_fence_lockdep_map, _RET_IP_);
> > > > +}
> > > > +EXPORT_SYMBOL(dma_fence_end_signalling);
> > > > +
> > > > +void __dma_fence_might_wait(void)
> > > > +{
> > > > +     bool tmp;
> > > > +
> > > > +     tmp = lock_is_held_type(&dma_fence_lockdep_map, 1);
> > > > +     if (tmp)
> > > > +             lock_release(&dma_fence_lockdep_map, _THIS_IP_);
> > > > +     lock_map_acquire(&dma_fence_lockdep_map);
> > > > +     lock_map_release(&dma_fence_lockdep_map);
> > > > +     if (tmp)
> > > > +             lock_acquire(&dma_fence_lockdep_map, 0, 0, 1, 1, NULL, _THIS_IP_);
> > > > +}
> > > > +#endif
> > > > +
> > > > +
> > > >   /**
> > > >    * dma_fence_signal_locked - signal completion of a fence
> > > >    * @fence: the fence to signal
> > > > @@ -170,14 +324,19 @@ int dma_fence_signal(struct dma_fence *fence)
> > > >   {
> > > >       unsigned long flags;
> > > >       int ret;
> > > > +     bool tmp;
> > > >
> > > >       if (!fence)
> > > >               return -EINVAL;
> > > >
> > > > +     tmp = dma_fence_begin_signalling();
> > > > +
> > > >       spin_lock_irqsave(fence->lock, flags);
> > > >       ret = dma_fence_signal_locked(fence);
> > > >       spin_unlock_irqrestore(fence->lock, flags);
> > > >
> > > > +     dma_fence_end_signalling(tmp);
> > > > +
> > > >       return ret;
> > > >   }
> > > >   EXPORT_SYMBOL(dma_fence_signal);
> > > > @@ -210,6 +369,8 @@ dma_fence_wait_timeout(struct dma_fence *fence, bool intr, signed long timeout)
> > > >
> > > >       might_sleep();
> > > >
> > > > +     __dma_fence_might_wait();
> > > > +
> > > >       trace_dma_fence_wait_start(fence);
> > > >       if (fence->ops->wait)
> > > >               ret = fence->ops->wait(fence, intr, timeout);
> > > > diff --git a/include/linux/dma-fence.h b/include/linux/dma-fence.h
> > > > index 3347c54f3a87..3f288f7db2ef 100644
> > > > --- a/include/linux/dma-fence.h
> > > > +++ b/include/linux/dma-fence.h
> > > > @@ -357,6 +357,18 @@ dma_fence_get_rcu_safe(struct dma_fence __rcu **fencep)
> > > >       } while (1);
> > > >   }
> > > >
> > > > +#ifdef CONFIG_LOCKDEP
> > > > +bool dma_fence_begin_signalling(void);
> > > > +void dma_fence_end_signalling(bool cookie);
> > > > +#else
> > > > +static inline bool dma_fence_begin_signalling(void)
> > > > +{
> > > > +     return true;
> > > > +}
> > > > +static inline void dma_fence_end_signalling(bool cookie) {}
> > > > +static inline void __dma_fence_might_wait(void) {}
> > > > +#endif
> > > > +
> > > >   int dma_fence_signal(struct dma_fence *fence);
> > > >   int dma_fence_signal_locked(struct dma_fence *fence);
> > > >   signed long dma_fence_default_wait(struct dma_fence *fence,
> > >
> >
> >
> > --
> > Daniel Vetter
> > Software Engineer, Intel Corporation
> > http://blog.ffwll.ch
> > _______________________________________________
> > amd-gfx mailing list
> > amd-gfx@xxxxxxxxxxxxxxxxxxxxx
> > https://lists.freedesktop.org/mailman/listinfo/amd-gfx



-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux