Now that the driver supports more than a single mode, implement the
.set_fmt pad operation and adjust the existing .get_fmt one to report
the currently applied format.
Signed-off-by: Jacopo Mondi <jacopo@xxxxxxxxxx>
---
drivers/media/i2c/ov5647.c | 67 +++++++++++++++++++++++++++++++++++---
1 file changed, 62 insertions(+), 5 deletions(-)
diff --git a/drivers/media/i2c/ov5647.c b/drivers/media/i2c/ov5647.c
index af9e6d43967d8..39e320f321bd8 100644
--- a/drivers/media/i2c/ov5647.c
+++ b/drivers/media/i2c/ov5647.c
@@ -1016,15 +1016,72 @@ static int ov5647_enum_frame_size(struct v4l2_subdev *sd,
return 0;
}
-static int ov5647_set_get_fmt(struct v4l2_subdev *sd,
+static int ov5647_get_pad_fmt(struct v4l2_subdev *sd,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_format *format)
{
struct v4l2_mbus_framefmt *fmt = &format->format;
+ struct v4l2_mbus_framefmt *sensor_format;
+ struct ov5647 *sensor = to_sensor(sd);
- /* Only one format is supported, so return that. */
+ mutex_lock(&sensor->lock);
memset(fmt, 0, sizeof(*fmt));
- *fmt = OV5647_DEFAULT_FORMAT;
+
+ switch (format->which) {
+ case V4L2_SUBDEV_FORMAT_TRY:
+ sensor_format = v4l2_subdev_get_try_format(sd, cfg, format->pad);
+ break;
+ default:
+ sensor_format = &sensor->mode->format;
+ break;
+ }
+
+ *fmt = *sensor_format;
+ mutex_unlock(&sensor->lock);
+
+ return 0;
+}
+
+static int ov5647_set_pad_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *format)
+{
+ struct v4l2_mbus_framefmt *fmt = &format->format;
+ struct ov5647 *sensor = to_sensor(sd);
+ struct ov5647_mode *ov5647_mode_list;
+ struct ov5647_mode *mode;
+ unsigned int num_modes;
+
+ /*
+ * Default mbus code MEDIA_BUS_FMT_SBGGR10_1X10 if the requested one
+ * is not supported.
+ */
+ if (fmt->code == MEDIA_BUS_FMT_SBGGR8_1X8) {
+ ov5647_mode_list = ov5647_sbggr8_modes;
+ num_modes = ARRAY_SIZE(ov5647_sbggr8_modes);
+ } else {
+ ov5647_mode_list = ov5647_sbggr10_modes;
+ num_modes = ARRAY_SIZE(ov5647_sbggr10_modes);
+ }
+
+ mode = v4l2_find_nearest_size(ov5647_mode_list, num_modes,
+ format.width, format.height,
+ fmt->width, fmt->height);
+
+ if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
+ mutex_lock(&sensor->lock);
+ *v4l2_subdev_get_try_format(sd, cfg, format->pad) = mode->format;
+ *fmt = mode->format;
+ mutex_unlock(&sensor->lock);
+
+ return 0;
+ }
+
+ /* Update the sensor mode and apply at it at streamon time. */
+ mutex_lock(&sensor->lock);
+ sensor->mode = mode;
+ *fmt = mode->format;
+ mutex_unlock(&sensor->lock);
return 0;
}
@@ -1068,8 +1125,8 @@ static int ov5647_get_selection(struct v4l2_subdev *sd,
static const struct v4l2_subdev_pad_ops ov5647_subdev_pad_ops = {
.enum_mbus_code = ov5647_enum_mbus_code,
.enum_frame_size = ov5647_enum_frame_size,
- .set_fmt = ov5647_set_get_fmt,
- .get_fmt = ov5647_set_get_fmt,
+ .set_fmt = ov5647_set_pad_fmt,
+ .get_fmt = ov5647_get_pad_fmt,
.get_selection = ov5647_get_selection,
};
--
2.27.0
