Add device driver and device tree bindings for a Chrontel CEC conroller. This is an I2C device that can send and receive CEC messages. Changes from v5: - Kconfig option should depend on I2C, not select - add flag to cec adapter in order to use notifier without addr updates (notifier is needed to enable CEC_CAP_CONNECTOR_INFO) - add optional dmi matching to associate adapter with hdmi port - read phys addr if hpd is up instead of relying on pending interrupt in device probe Changes from v4: - rebase onto master (vendor-prefixes.yaml already updated) Changes from v3: - address devicetree comments - revert interrupt mask/unmask in cec adapter enable (the driver relies on the interrupt to get the physical address) Changes from v2: - fix formatting errors - mask and unmask interrupt in cec adapter enable Changes from v1: - fix formatpatch.pl --strict errors - additional comments - enable and program logical address register - add flags to aid interpreting transmit done status - move ch7322 out of devicetree trivial devices Jeff Chase (3): dt-bindings: Add ch7322 media i2c device media: cec: add adap_controls_phys_addr option media: cec: i2c: ch7322: Add ch7322 CEC controller driver .../bindings/media/i2c/chrontel,ch7322.yaml | 67 ++ MAINTAINERS | 8 + drivers/media/cec/Kconfig | 1 + drivers/media/cec/Makefile | 2 +- drivers/media/cec/core/cec-notifier.c | 11 +- drivers/media/cec/i2c/Kconfig | 14 + drivers/media/cec/i2c/Makefile | 5 + drivers/media/cec/i2c/ch7322.c | 604 ++++++++++++++++++ include/media/cec.h | 1 + 9 files changed, 708 insertions(+), 5 deletions(-) create mode 100644 Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml create mode 100644 drivers/media/cec/i2c/Kconfig create mode 100644 drivers/media/cec/i2c/Makefile create mode 100644 drivers/media/cec/i2c/ch7322.c -- 2.27.0.111.gc72c7da667-goog
