On 18/06/2020 21:05, Kaaira Gupta wrote:
> Add a control in VIMC to display information such as the correct oder of
odor -> order
> colors for a given test pattern, brightness, hue, saturation, contrast
> and, width and height at sensor over test image; and display that
> information.
and, width -> and width
'; and display that information': just drop this since you already mentioned
that in 'a control in VIMC to display information'.
It is also useful to show the sequence counter (i.e. the sequence field in
struct v4l2_buffer) since this always changes for every frame.
Perhaps base VIMC_CID_SHOW_INFO on VIVID_CID_OSD_TEXT_MODE?
Doing this as a menu control allows you to add other combinations in the future.
>
> Signed-off-by: Kaaira Gupta <kgupta@xxxxxxxxxxxxx>
> ---
> drivers/media/test-drivers/vimc/Kconfig | 2 +
> drivers/media/test-drivers/vimc/vimc-common.h | 1 +
> drivers/media/test-drivers/vimc/vimc-sensor.c | 47 ++++++++++++++++++-
> 3 files changed, 49 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/test-drivers/vimc/Kconfig b/drivers/media/test-drivers/vimc/Kconfig
> index 4068a67585f9..da4b2ad6e40c 100644
> --- a/drivers/media/test-drivers/vimc/Kconfig
> +++ b/drivers/media/test-drivers/vimc/Kconfig
> @@ -2,6 +2,8 @@
> config VIDEO_VIMC
> tristate "Virtual Media Controller Driver (VIMC)"
> depends on VIDEO_DEV && VIDEO_V4L2
> + select FONT_SUPPORT
> + select FONT_8x16
> select MEDIA_CONTROLLER
> select VIDEO_V4L2_SUBDEV_API
> select VIDEOBUF2_VMALLOC
> diff --git a/drivers/media/test-drivers/vimc/vimc-common.h b/drivers/media/test-drivers/vimc/vimc-common.h
> index ae163dec2459..afda52253402 100644
> --- a/drivers/media/test-drivers/vimc/vimc-common.h
> +++ b/drivers/media/test-drivers/vimc/vimc-common.h
> @@ -20,6 +20,7 @@
> #define VIMC_CID_VIMC_CLASS (0x00f00000 | 1)
> #define VIMC_CID_TEST_PATTERN (VIMC_CID_VIMC_BASE + 0)
> #define VIMC_CID_MEAN_WIN_SIZE (VIMC_CID_VIMC_BASE + 1)
> +#define VIMC_CID_SHOW_INFO (VIMC_CID_VIMC_BASE + 2)
>
> #define VIMC_FRAME_MAX_WIDTH 4096
> #define VIMC_FRAME_MAX_HEIGHT 2160
> diff --git a/drivers/media/test-drivers/vimc/vimc-sensor.c b/drivers/media/test-drivers/vimc/vimc-sensor.c
> index a2f09ac9a360..f5352b115aac 100644
> --- a/drivers/media/test-drivers/vimc/vimc-sensor.c
> +++ b/drivers/media/test-drivers/vimc/vimc-sensor.c
> @@ -5,6 +5,7 @@
> * Copyright (C) 2015-2017 Helen Koike <helen.fornazier@xxxxxxxxx>
> */
>
> +#include <linux/font.h>
> #include <linux/v4l2-mediabus.h>
> #include <linux/vmalloc.h>
> #include <media/v4l2-ctrls.h>
> @@ -19,6 +20,7 @@ struct vimc_sen_device {
> struct v4l2_subdev sd;
> struct tpg_data tpg;
> u8 *frame;
> + bool show_info;
> /* The active format */
> struct v4l2_mbus_framefmt mbus_format;
> struct v4l2_ctrl_handler hdl;
> @@ -185,10 +187,29 @@ static const struct v4l2_subdev_pad_ops vimc_sen_pad_ops = {
> static void *vimc_sen_process_frame(struct vimc_ent_device *ved,
> const void *sink_frame)
> {
> + u8 *basep[TPG_MAX_PLANES][2];
> + char *order;
> + char str[100];
> + int line = 1;
> struct vimc_sen_device *vsen = container_of(ved, struct vimc_sen_device,
> ved);
> -
> tpg_fill_plane_buffer(&vsen->tpg, 0, 0, vsen->frame);
> + if (vsen->show_info) {
> + tpg_calc_text_basep(&vsen->tpg, basep, 0, vsen->frame);
> + order = tpg_g_color_order(&vsen->tpg);
> + tpg_gen_text(&vsen->tpg, basep, line++ * 16, 16, order);
> + snprintf(str, sizeof(str), " brightness %3d, contrast %3d, saturation %3d, hue %d ",
The previous tpg_gen_text doesn't have a leading space, but this and the next line
does. That should be consistent.
I can't quite remember why I added spaces before/after the text in the vivid implementation.
I think it was because it looked weird without a space, probably because the text color was
identical to the first colorbar in some of the patterns, making it hard to read in some
cases.
> + vsen->tpg.brightness,
> + vsen->tpg.contrast,
> + vsen->tpg.saturation,
> + vsen->tpg.hue);
> + tpg_gen_text(&vsen->tpg, basep, line++ * 16, 16, str);
> +
> + snprintf(str, sizeof(str), " sensor size: %dx%d",
> + vsen->mbus_format.width, vsen->mbus_format.height);
> + tpg_gen_text(&vsen->tpg, basep, line++ * 16, 16, str);
> + }
> +
> return vsen->frame;
> }
>
> @@ -200,6 +221,14 @@ static int vimc_sen_s_stream(struct v4l2_subdev *sd, int enable)
> if (enable) {
> const struct vimc_pix_map *vpix;
> unsigned int frame_size;
> + const struct font_desc *font = find_font("VGA8x16");
> +
> + if (font == NULL) {
> + pr_err("vimc: could not find font\n");
> + vsen->show_info = 0;
> + } else {
> + tpg_set_font(font->data);
> + }
Like vivid, this should be done in the probe/init/whatever function, and not when
you start streaming. Kconfig selects this font, so if this doesn't succeed, then
the driver shouldn't finish the probe().
>
> /* Calculate the frame size */
> vpix = vimc_pix_map_by_code(vsen->mbus_format.code);
> @@ -269,6 +298,9 @@ static int vimc_sen_s_ctrl(struct v4l2_ctrl *ctrl)
> case V4L2_CID_SATURATION:
> tpg_s_saturation(&vsen->tpg, ctrl->val);
> break;
> + case VIMC_CID_SHOW_INFO:
> + vsen->show_info = ctrl->val;
> + break;
> default:
> return -EINVAL;
> }
> @@ -307,6 +339,17 @@ static const struct v4l2_ctrl_config vimc_sen_ctrl_test_pattern = {
> .qmenu = tpg_pattern_strings,
> };
>
> +static const struct v4l2_ctrl_config vimc_sen_ctrl_show_info = {
> + .ops = &vimc_sen_ctrl_ops,
> + .id = VIMC_CID_SHOW_INFO,
> + .name = "Show Information",
> + .type = V4L2_CTRL_TYPE_BOOLEAN,
> + .min = 0,
> + .max = 1,
> + .step = 1,
> + .def = 1,
> +};
> +
> static struct vimc_ent_device *vimc_sen_add(struct vimc_device *vimc,
> const char *vcfg_name)
> {
> @@ -323,6 +366,7 @@ static struct vimc_ent_device *vimc_sen_add(struct vimc_device *vimc,
>
> v4l2_ctrl_new_custom(&vsen->hdl, &vimc_sen_ctrl_class, NULL);
> v4l2_ctrl_new_custom(&vsen->hdl, &vimc_sen_ctrl_test_pattern, NULL);
> + v4l2_ctrl_new_custom(&vsen->hdl, &vimc_sen_ctrl_show_info, NULL);
> v4l2_ctrl_new_std(&vsen->hdl, &vimc_sen_ctrl_ops,
> V4L2_CID_VFLIP, 0, 1, 1, 0);
> v4l2_ctrl_new_std(&vsen->hdl, &vimc_sen_ctrl_ops,
> @@ -362,6 +406,7 @@ static struct vimc_ent_device *vimc_sen_add(struct vimc_device *vimc,
>
> /* Initialize the frame format */
> vsen->mbus_format = fmt_default;
> + vsen->show_info = vimc_sen_ctrl_show_info.def;
>
> return &vsen->ved;
>
>
Regards,
Hans
