W dniu 14.03.2010 09:26, Jean Delvare pisze:
Hi Daro,
On Sun, 14 Mar 2010 03:38:11 +0100, Daro wrote:
Hi Jean,
I am back and ready to go :)
As I am not much experienced Linux user I would apprieciate some more
details:
I have few linux kernels installed; which one should I test or it does
not matter?
2.6.31-14-generic
2.6.31-16-generic
2.6.31-17-generic
2.6.31-19-generic
2.6.31-20-generic
and one I compiled myself
2.6.32.2
I assume that to proceed with a test I should patch the certain version
of kernel and compile it or could it be done other way?
It will be easier with the kernel you compiled yourself. First of all,
download the patch from:
http://patchwork.kernel.org/patch/75883/raw/
Then, move to the source directory of your 2.6.32.2 kernel and apply
the patch:
$ cd ~/src/linux-2.6.32
$ patch -p2< ~/download/saa7134-Fix-IR-support-of-some-ASUS-TV-FM-7135-variants.patch
Adjust the path in each command to match your own setup. Then just
build and install the kernel:
$ make
$ sudo make modules_install
$ sudo make install
Or whatever method you use to install your self-compiled kernels. Then
reboot to kernel 2.6.32.2 and test that the remote control works even
when _not_ passing any card parameter to the driver.
If you ever need to remove the patch, use:
$ cd ~/src/linux-2.6.32
$ patch -p2 -R< ~/download/saa7134-Fix-IR-support-of-some-ASUS-TV-FM-7135-variants.patch
I hope my instructions are clear enough, if you have any problem, just
ask.
Thanks,
Hi Jean!
It works!
dmesg output is attached.
However I will have to go back to "generic" kernel as under my
"self-built" kernels fglrx driver stops working and I did not manage to
solve it :(
Or maybe you could give me a hint what to do with it?
Best regards
Daro
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32.2 (root@DOMOWY) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu9) ) #2 SMP Sun Mar 14 14:11:25 CET 2010
[ 0.000000] Command line: root=/dev/mapper/isw_bgccbabfgf_SYSTEM2 ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000096c00 (usable)
[ 0.000000] BIOS-e820: 0000000000096c00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff80000 (usable)
[ 0.000000] BIOS-e820: 000000007ff80000 - 000000007ff8e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ff8e000 - 000000007ffd0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ffd0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x7ff80 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 0000000000096c00 (usable)
[ 0.000000] modified: 0000000000096c00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007ff80000 (usable)
[ 0.000000] modified: 000000007ff80000 - 000000007ff8e000 (ACPI data)
[ 0.000000] modified: 000000007ff8e000 - 000000007ffd0000 (ACPI NVS)
[ 0.000000] modified: 000000007ffd0000 - 0000000080000000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000007ff80000
[ 0.000000] 0000000000 - 007fe00000 page 2M
[ 0.000000] 007fe00000 - 007ff80000 page 4k
[ 0.000000] kernel direct mapping tables up to 7ff80000 @ 10000-14000
[ 0.000000] RAMDISK: 33d1c000 - 37fef0bf
[ 0.000000] ACPI: RSDP 00000000000fbbf0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 000000007ff80000 0003C (v01 A_M_I_ OEMRSDT 12000801 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000007ff80200 00084 (v02 A_M_I_ OEMFACP 12000801 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000007ff80440 09FDD (v01 A1032 A1032001 00000001 INTL 20051117)
[ 0.000000] ACPI: FACS 000000007ff8e000 00040
[ 0.000000] ACPI: APIC 000000007ff80390 0006C (v01 A_M_I_ OEMAPIC 12000801 MSFT 00000097)
[ 0.000000] ACPI: MCFG 000000007ff80400 0003C (v01 A_M_I_ OEMMCFG 12000801 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000007ff8e040 00089 (v01 A_M_I_ AMI_OEM 12000801 MSFT 00000097)
[ 0.000000] ACPI: HPET 000000007ff8a420 00038 (v01 A_M_I_ OEMHPET 12000801 MSFT 00000097)
[ 0.000000] ACPI: OSFR 000000007ff8a460 000B0 (v01 A_M_I_ OEMOSFR 12000801 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007ff80000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007ff80000
[ 0.000000] NODE_DATA [0000000000012000 - 0000000000016fff]
[ 0.000000] bootmap [0000000000017000 - 0000000000026fef] pages 10
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 007ff80000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 00019f82c4] TEXT DATA BSS ==> [0001000000 - 00019f82c4]
[ 0.000000] #3 [0033d1c000 - 0037fef0bf] RAMDISK ==> [0033d1c000 - 0037fef0bf]
[ 0.000000] #4 [0000096c00 - 0000100000] BIOS reserved ==> [0000096c00 - 0000100000]
[ 0.000000] #5 [00019f9000 - 00019f9278] BRK ==> [00019f9000 - 00019f9278]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001e00000-ffff8800039fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000096
[ 0.000000] 0: 0x00000100 -> 0x0007ff80
[ 0.000000] On node 0 totalpages: 524038
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 110 pages reserved
[ 0.000000] DMA zone: 3808 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7111 pages used for memmap
[ 0.000000] DMA32 zone: 512953 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000096000 - 0000000000097000
[ 0.000000] PM: Registered nosave memory: 0000000000097000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880003a00000 s91288 r8192 d23400 u524288
[ 0.000000] pcpu-alloc: s91288 r8192 d23400 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516761
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/mapper/isw_bgccbabfgf_SYSTEM2 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1988188k/2096640k available (5351k kernel code, 488k absent, 107964k reserved, 3059k data, 688k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 20971520 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2330.878 MHz processor.
[ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4661.75 BogoMIPS (lpj=23308780)
[ 0.010056] Security Framework initialized
[ 0.010088] SELinux: Disabled at boot.
[ 0.010272] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.011047] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.011479] Mount-cache hash table entries: 256
[ 0.011631] Initializing cgroup subsys ns
[ 0.011663] Initializing cgroup subsys cpuacct
[ 0.011693] Initializing cgroup subsys memory
[ 0.011727] Initializing cgroup subsys freezer
[ 0.011755] Initializing cgroup subsys net_cls
[ 0.011800] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.011852] CPU: L2 cache: 2048K
[ 0.011881] CPU 0/0x0 -> Node 0
[ 0.011910] CPU: Physical Processor ID: 0
[ 0.011938] CPU: Processor Core ID: 0
[ 0.011967] mce: CPU supports 6 MCE banks
[ 0.012001] CPU0: Thermal monitoring enabled (TM1)
[ 0.012032] using mwait in idle threads.
[ 0.012060] Performance Events: Core2 events, Intel PMU driver.
[ 0.012137] ... version: 2
[ 0.012165] ... bit width: 40
[ 0.012194] ... generic registers: 2
[ 0.012222] ... value mask: 000000ffffffffff
[ 0.012251] ... max period: 000000007fffffff
[ 0.012279] ... fixed-purpose events: 3
[ 0.012307] ... event mask: 0000000700000003
[ 0.014711] ACPI: Core revision 20090903
[ 0.030048] Setting APIC routing to flat
[ 0.030376] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.135645] CPU0: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping 07
[ 0.140000] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.010000] Initializing CPU#1
[ 0.010000] Calibrating delay using timer specific routine.. 4661.96 BogoMIPS (lpj=23309826)
[ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.010000] CPU: L2 cache: 2048K
[ 0.010000] CPU 1/0x1 -> Node 0
[ 0.010000] CPU: Physical Processor ID: 0
[ 0.010000] CPU: Processor Core ID: 1
[ 0.010000] CPU1: Thermal monitoring enabled (TM1)
[ 0.290066] CPU1: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping 07
[ 0.290364] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.300090] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.010000] Initializing CPU#2
[ 0.010000] Calibrating delay using timer specific routine.. 4661.98 BogoMIPS (lpj=23309932)
[ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.010000] CPU: L2 cache: 2048K
[ 0.010000] CPU 2/0x2 -> Node 0
[ 0.010000] CPU: Physical Processor ID: 0
[ 0.010000] CPU: Processor Core ID: 2
[ 0.010000] CPU2: Thermal monitoring enabled (TM1)
[ 0.460111] CPU2: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping 07
[ 0.460410] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.470063] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.010000] Initializing CPU#3
[ 0.010000] Calibrating delay using timer specific routine.. 4661.98 BogoMIPS (lpj=23309902)
[ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.010000] CPU: L2 cache: 2048K
[ 0.010000] CPU 3/0x3 -> Node 0
[ 0.010000] CPU: Physical Processor ID: 0
[ 0.010000] CPU: Processor Core ID: 3
[ 0.010000] CPU3: Thermal monitoring enabled (TM1)
[ 0.630062] CPU3: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping 07
[ 0.630360] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.640009] Brought up 4 CPUs
[ 0.640042] Total of 4 processors activated (18647.68 BogoMIPS).
[ 0.641281] CPU0 attaching sched-domain:
[ 0.641284] domain 0: span 0-1 level MC
[ 0.641286] groups: 0 1
[ 0.641290] domain 1: span 0-3 level CPU
[ 0.641292] groups: 0-1 (cpu_power = 2048) 2-3 (cpu_power = 2048)
[ 0.641299] CPU1 attaching sched-domain:
[ 0.641300] domain 0: span 0-1 level MC
[ 0.641302] groups: 1 0
[ 0.641306] domain 1: span 0-3 level CPU
[ 0.641308] groups: 0-1 (cpu_power = 2048) 2-3 (cpu_power = 2048)
[ 0.641313] CPU2 attaching sched-domain:
[ 0.641314] domain 0: span 2-3 level MC
[ 0.641317] groups: 2 3
[ 0.641320] domain 1: span 0-3 level CPU
[ 0.641322] groups: 2-3 (cpu_power = 2048) 0-1 (cpu_power = 2048)
[ 0.641327] CPU3 attaching sched-domain:
[ 0.641328] domain 0: span 2-3 level MC
[ 0.641330] groups: 3 2
[ 0.641333] domain 1: span 0-3 level CPU
[ 0.641336] groups: 2-3 (cpu_power = 2048) 0-1 (cpu_power = 2048)
[ 0.641470] regulator: core version 0.5
[ 0.641470] Time: 20:15:57 Date: 03/14/10
[ 0.641470] NET: Registered protocol family 16
[ 0.641470] ACPI: bus type pci registered
[ 0.641470] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.641470] PCI: Not using MMCONFIG.
[ 0.641470] PCI: Using configuration type 1 for base access
[ 0.641557] bio: create slab <bio-0> at 0
[ 0.641557] ACPI: EC: Look up EC in DSDT
[ 0.643160] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.656812] ACPI: Interpreter enabled
[ 0.656843] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.657002] ACPI: Using IOAPIC for interrupt routing
[ 0.657077] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.659552] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.662396] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.670091] ACPI Warning: Incorrect checksum in table [OEMB] - 2F, should be 2E (20090903/tbutils-314)
[ 0.670303] ACPI: No dock devices found.
[ 0.670463] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.670580] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.670610] pci 0000:00:01.0: PME# disabled
[ 0.670698] pci 0000:00:1a.0: reg 20 io port: [0xa800-0xa81f]
[ 0.670757] pci 0000:00:1a.1: reg 20 io port: [0xa880-0xa89f]
[ 0.670815] pci 0000:00:1a.2: reg 20 io port: [0xac00-0xac1f]
[ 0.670877] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe7ffc00-0xfe7fffff]
[ 0.670924] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.670956] pci 0000:00:1a.7: PME# disabled
[ 0.671017] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe7f8000-0xfe7fbfff]
[ 0.671052] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.671083] pci 0000:00:1b.0: PME# disabled
[ 0.671161] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.671192] pci 0000:00:1c.0: PME# disabled
[ 0.671275] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.671306] pci 0000:00:1c.4: PME# disabled
[ 0.671385] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.671416] pci 0000:00:1c.5: PME# disabled
[ 0.671489] pci 0000:00:1d.0: reg 20 io port: [0xa080-0xa09f]
[ 0.671547] pci 0000:00:1d.1: reg 20 io port: [0xa400-0xa41f]
[ 0.671606] pci 0000:00:1d.2: reg 20 io port: [0xa480-0xa49f]
[ 0.671668] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe7ff800-0xfe7ffbff]
[ 0.671715] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.671746] pci 0000:00:1d.7: PME# disabled
[ 0.671880] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.671915] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.671946] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.672034] pci 0000:00:1f.2: reg 10 io port: [0x9c00-0x9c07]
[ 0.672039] pci 0000:00:1f.2: reg 14 io port: [0x9880-0x9883]
[ 0.672043] pci 0000:00:1f.2: reg 18 io port: [0x9800-0x9807]
[ 0.672048] pci 0000:00:1f.2: reg 1c io port: [0x9480-0x9483]
[ 0.672053] pci 0000:00:1f.2: reg 20 io port: [0x9400-0x941f]
[ 0.672058] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe7fe800-0xfe7fefff]
[ 0.672084] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.672114] pci 0000:00:1f.2: PME# disabled
[ 0.672165] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfe7ff400-0xfe7ff4ff]
[ 0.672177] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.672217] pci 0000:01:00.0: reg 10 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.672224] pci 0000:01:00.0: reg 18 64bit mmio: [0xfe8e0000-0xfe8effff]
[ 0.672229] pci 0000:01:00.0: reg 20 io port: [0xb000-0xb0ff]
[ 0.672237] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfe8c0000-0xfe8dffff]
[ 0.672253] pci 0000:01:00.0: supports D1 D2
[ 0.672280] pci 0000:01:00.1: reg 10 64bit mmio: [0xfe8fc000-0xfe8fffff]
[ 0.672310] pci 0000:01:00.1: supports D1 D2
[ 0.672349] pci 0000:00:01.0: bridge io port: [0xb000-0xbfff]
[ 0.672352] pci 0000:00:01.0: bridge 32bit mmio: [0xfe800000-0xfe8fffff]
[ 0.672355] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.672394] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff]
[ 0.672476] pci 0000:03:00.0: reg 24 32bit mmio: [0xfeafe000-0xfeafffff]
[ 0.672484] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfeae0000-0xfeaeffff]
[ 0.672513] pci 0000:03:00.0: PME# supported from D3hot
[ 0.672545] pci 0000:03:00.0: PME# disabled
[ 0.672621] pci 0000:03:00.1: reg 10 io port: [0xdc00-0xdc07]
[ 0.672629] pci 0000:03:00.1: reg 14 io port: [0xd880-0xd883]
[ 0.672637] pci 0000:03:00.1: reg 18 io port: [0xd800-0xd807]
[ 0.672645] pci 0000:03:00.1: reg 1c io port: [0xd480-0xd483]
[ 0.672654] pci 0000:03:00.1: reg 20 io port: [0xd400-0xd40f]
[ 0.672736] pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff]
[ 0.672739] pci 0000:00:1c.4: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[ 0.672790] pci 0000:02:00.0: reg 10 64bit mmio: [0xfe9c0000-0xfe9fffff]
[ 0.672797] pci 0000:02:00.0: reg 18 io port: [0xcc00-0xcc7f]
[ 0.672850] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.672882] pci 0000:02:00.0: PME# disabled
[ 0.672953] pci 0000:00:1c.5: bridge io port: [0xc000-0xcfff]
[ 0.672957] pci 0000:00:1c.5: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
[ 0.672989] pci 0000:05:00.0: reg 10 32bit mmio: [0xfebff800-0xfebfffff]
[ 0.673030] pci 0000:05:00.0: supports D1 D2
[ 0.673050] pci 0000:05:01.0: reg 10 32bit mmio: [0xfebe0000-0xfebeffff]
[ 0.673056] pci 0000:05:01.0: reg 14 io port: [0xec00-0xec1f]
[ 0.673109] pci 0000:05:03.0: reg 10 32bit mmio: [0xfebfe000-0xfebfefff]
[ 0.673149] pci 0000:05:03.0: supports D1 D2
[ 0.673151] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.673182] pci 0000:05:03.0: PME# disabled
[ 0.673247] pci 0000:00:1e.0: transparent bridge
[ 0.673277] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[ 0.673280] pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[ 0.673308] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.673430] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.673486] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.673592] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.673655] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.673729] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.689199] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.689606] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.690023] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.690428] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.690832] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.691285] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.691688] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.692092] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.692484] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.692522] vgaarb: loaded
[ 0.692637] SCSI subsystem initialized
[ 0.692695] libata version 3.00 loaded.
[ 0.692695] usbcore: registered new interface driver usbfs
[ 0.692695] usbcore: registered new interface driver hub
[ 0.692695] usbcore: registered new device driver usb
[ 0.692695] ACPI: WMI: Mapper loaded
[ 0.692695] PCI: Using ACPI for IRQ routing
[ 0.692695] Bluetooth: Core ver 2.15
[ 0.692695] NET: Registered protocol family 31
[ 0.692695] Bluetooth: HCI device and connection manager initialized
[ 0.692695] Bluetooth: HCI socket layer initialized
[ 0.692695] NetLabel: Initializing
[ 0.692695] NetLabel: domain hash size = 128
[ 0.692695] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.692695] NetLabel: unlabeled traffic allowed by default
[ 0.692695] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.692695] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.710004] Switching to clocksource tsc
[ 0.711438] pnp: PnP ACPI init
[ 0.711483] ACPI: bus type pnp registered
[ 0.714327] pnp: PnP ACPI: found 15 devices
[ 0.714357] ACPI: ACPI bus type pnp unregistered
[ 0.714393] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.714428] system 00:06: ioport range 0x290-0x29f has been reserved
[ 0.714460] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.714491] system 00:07: ioport range 0x800-0x87f has been reserved
[ 0.714521] system 00:07: ioport range 0x500-0x57f could not be reserved
[ 0.714552] system 00:07: iomem range 0xfed08000-0xfed08fff has been reserved
[ 0.714582] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.714613] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.714643] system 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved
[ 0.714676] system 00:0a: iomem range 0xffc00000-0xffefffff has been reserved
[ 0.714710] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.714744] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.714776] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.714809] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.714840] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
[ 0.714871] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.714901] system 00:0e: iomem range 0x100000-0x7fffffff could not be reserved
[ 0.714935] system 00:0e: iomem range 0xe0000000-0xffffffff could not be reserved
[ 0.719642] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.719673] pci 0000:00:01.0: IO window: 0xb000-0xbfff
[ 0.719704] pci 0000:00:01.0: MEM window: 0xfe800000-0xfe8fffff
[ 0.719734] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.719769] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
[ 0.719799] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 0.719831] pci 0000:00:1c.0: MEM window: 0x80000000-0x803fffff
[ 0.719862] pci 0000:00:1c.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff
[ 0.719899] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
[ 0.719942] pci 0000:00:1c.4: IO window: 0xd000-0xdfff
[ 0.719974] pci 0000:00:1c.4: MEM window: 0xfea00000-0xfeafffff
[ 0.720005] pci 0000:00:1c.4: PREFETCH window: 0x00000080400000-0x000000805fffff
[ 0.720041] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02
[ 0.720071] pci 0000:00:1c.5: IO window: 0xc000-0xcfff
[ 0.720103] pci 0000:00:1c.5: MEM window: 0xfe900000-0xfe9fffff
[ 0.720134] pci 0000:00:1c.5: PREFETCH window: 0x00000080600000-0x000000807fffff
[ 0.720170] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.720201] pci 0000:00:1e.0: IO window: 0xe000-0xefff
[ 0.720232] pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff
[ 0.720263] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.720299] alloc irq_desc for 16 on node -1
[ 0.720301] alloc kstat_irqs on node -1
[ 0.720305] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.720336] pci 0000:00:01.0: setting latency timer to 64
[ 0.720342] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.720373] alloc irq_desc for 17 on node -1
[ 0.720375] alloc kstat_irqs on node -1
[ 0.720378] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.720409] pci 0000:00:1c.0: setting latency timer to 64
[ 0.720416] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.720447] pci 0000:00:1c.4: setting latency timer to 64
[ 0.720453] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.720484] pci 0000:00:1c.5: setting latency timer to 64
[ 0.720490] pci 0000:00:1e.0: setting latency timer to 64
[ 0.720493] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.720495] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.720498] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
[ 0.720500] pci_bus 0000:01: resource 1 mem: [0xfe800000-0xfe8fffff]
[ 0.720502] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.720504] pci_bus 0000:04: resource 0 io: [0x1000-0x1fff]
[ 0.720506] pci_bus 0000:04: resource 1 mem: [0x80000000-0x803fffff]
[ 0.720508] pci_bus 0000:04: resource 2 pref mem [0xfdf00000-0xfdffffff]
[ 0.720510] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
[ 0.720512] pci_bus 0000:03: resource 1 mem: [0xfea00000-0xfeafffff]
[ 0.720514] pci_bus 0000:03: resource 2 pref mem [0x80400000-0x805fffff]
[ 0.720516] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
[ 0.720518] pci_bus 0000:02: resource 1 mem: [0xfe900000-0xfe9fffff]
[ 0.720520] pci_bus 0000:02: resource 2 pref mem [0x80600000-0x807fffff]
[ 0.720522] pci_bus 0000:05: resource 0 io: [0xe000-0xefff]
[ 0.720524] pci_bus 0000:05: resource 1 mem: [0xfeb00000-0xfebfffff]
[ 0.720526] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.720528] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.720556] NET: Registered protocol family 2
[ 0.720698] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.721315] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.722806] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.723236] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.723266] TCP reno registered
[ 0.723396] NET: Registered protocol family 1
[ 0.723551] pci 0000:01:00.0: Boot video device
[ 0.723608] Trying to unpack rootfs image as initramfs...
[ 2.109666] Freeing initrd memory: 68428k freed
[ 2.130980] Scanning for low memory corruption every 60 seconds
[ 2.131138] audit: initializing netlink socket (disabled)
[ 2.131181] type=2000 audit(1268597759.130:1): initialized
[ 2.139357] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.140576] VFS: Disk quotas dquot_6.5.2
[ 2.140651] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.141166] fuse init (API version 7.13)
[ 2.141261] msgmni has been set to 4016
[ 2.141512] alg: No test for stdrng (krng)
[ 2.141547] io scheduler noop registered
[ 2.141576] io scheduler anticipatory registered
[ 2.141605] io scheduler deadline registered
[ 2.141668] io scheduler cfq registered (default)
[ 2.141793] alloc irq_desc for 24 on node -1
[ 2.141795] alloc kstat_irqs on node -1
[ 2.141802] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 2.141807] pcieport 0000:00:01.0: setting latency timer to 64
[ 2.141883] alloc irq_desc for 25 on node -1
[ 2.141885] alloc kstat_irqs on node -1
[ 2.141891] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 2.141897] pcieport 0000:00:1c.0: setting latency timer to 64
[ 2.141995] alloc irq_desc for 26 on node -1
[ 2.141996] alloc kstat_irqs on node -1
[ 2.142002] pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
[ 2.142009] pcieport 0000:00:1c.4: setting latency timer to 64
[ 2.142099] alloc irq_desc for 27 on node -1
[ 2.142100] alloc kstat_irqs on node -1
[ 2.142106] pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X
[ 2.142112] pcieport 0000:00:1c.5: setting latency timer to 64
[ 2.142186] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.142299] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.142440] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 2.142475] ACPI: Power Button [PWRB]
[ 2.142546] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 2.142579] ACPI: Power Button [PWRF]
[ 2.142903] processor LNXCPU:00: registered as cooling_device0
[ 2.142961] processor LNXCPU:01: registered as cooling_device1
[ 2.143019] processor LNXCPU:02: registered as cooling_device2
[ 2.143079] processor LNXCPU:03: registered as cooling_device3
[ 2.146430] Linux agpgart interface v0.103
[ 2.146461] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.146576] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.146894] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.147743] brd: module loaded
[ 2.148144] loop: module loaded
[ 2.148228] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 2.148334] ahci 0000:00:1f.2: version 3.0
[ 2.148344] alloc irq_desc for 19 on node -1
[ 2.148346] alloc kstat_irqs on node -1
[ 2.148351] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.148400] alloc irq_desc for 28 on node -1
[ 2.148402] alloc kstat_irqs on node -1
[ 2.148408] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[ 2.148439] ahci: SSS flag set, parallel bus scan disabled
[ 2.148496] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
[ 2.148531] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
[ 2.148566] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.240045] scsi0 : ahci
[ 2.240147] scsi1 : ahci
[ 2.240223] scsi2 : ahci
[ 2.240300] scsi3 : ahci
[ 2.240376] scsi4 : ahci
[ 2.240938] scsi5 : ahci
[ 2.241105] ata1: SATA max UDMA/133 abar m2048@0xfe7fe800 port 0xfe7fe900 irq 28
[ 2.241139] ata2: SATA max UDMA/133 abar m2048@0xfe7fe800 port 0xfe7fe980 irq 28
[ 2.241173] ata3: SATA max UDMA/133 abar m2048@0xfe7fe800 port 0xfe7fea00 irq 28
[ 2.241206] ata4: SATA max UDMA/133 abar m2048@0xfe7fe800 port 0xfe7fea80 irq 28
[ 2.241240] ata5: SATA max UDMA/133 abar m2048@0xfe7fe800 port 0xfe7feb00 irq 28
[ 2.241274] ata6: SATA max UDMA/133 abar m2048@0xfe7fe800 port 0xfe7feb80 irq 28
[ 2.241342] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.260032] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 2.260067] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 2.260100] ahci 0000:03:00.0: setting latency timer to 64
[ 2.260225] scsi6 : ahci
[ 2.260305] scsi7 : ahci
[ 2.260401] ata7: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16
[ 2.260436] ata8: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16
[ 2.260809] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 2.260842] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.260900] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 2.260952] scsi8 : pata_jmicron
[ 2.261029] scsi9 : pata_jmicron
[ 2.261569] ata9: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[ 2.261600] ata10: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[ 2.262103] Fixed MDIO Bus: probed
[ 2.262160] PPP generic driver version 2.4.2
[ 2.262277] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.262323] alloc irq_desc for 18 on node -1
[ 2.262324] alloc kstat_irqs on node -1
[ 2.262329] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.262369] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 2.262372] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.262435] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 2.262490] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.266413] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 2.266423] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe7ffc00
[ 2.280008] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.280095] usb usb1: configuration #1 chosen from 1 choice
[ 2.280146] hub 1-0:1.0: USB hub found
[ 2.280179] hub 1-0:1.0: 6 ports detected
[ 2.280256] alloc irq_desc for 23 on node -1
[ 2.280258] alloc kstat_irqs on node -1
[ 2.280261] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.280298] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.280300] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.280352] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 2.280405] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.284328] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.284338] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe7ff800
[ 2.300008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.300081] usb usb2: configuration #1 chosen from 1 choice
[ 2.300130] hub 2-0:1.0: USB hub found
[ 2.300162] hub 2-0:1.0: 6 ports detected
[ 2.300237] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.300279] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.300354] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.300388] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.300390] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.300442] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.300494] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
[ 2.300584] usb usb3: configuration #1 chosen from 1 choice
[ 2.300632] hub 3-0:1.0: USB hub found
[ 2.300665] hub 3-0:1.0: 2 ports detected
[ 2.300726] alloc irq_desc for 21 on node -1
[ 2.300728] alloc kstat_irqs on node -1
[ 2.300731] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.300765] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 2.300767] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.300821] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 2.300877] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
[ 2.300962] usb usb4: configuration #1 chosen from 1 choice
[ 2.301013] hub 4-0:1.0: USB hub found
[ 2.301046] hub 4-0:1.0: 2 ports detected
[ 2.301111] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.301144] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 2.301147] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 2.301207] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 2.301260] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000ac00
[ 2.301346] usb usb5: configuration #1 chosen from 1 choice
[ 2.301396] hub 5-0:1.0: USB hub found
[ 2.301428] hub 5-0:1.0: 2 ports detected
[ 2.301491] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.301524] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.301526] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.301576] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 2.301628] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
[ 2.301714] usb usb6: configuration #1 chosen from 1 choice
[ 2.301762] hub 6-0:1.0: USB hub found
[ 2.301794] hub 6-0:1.0: 2 ports detected
[ 2.301859] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.301892] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.301895] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.301946] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 2.302002] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
[ 2.302090] usb usb7: configuration #1 chosen from 1 choice
[ 2.302138] hub 7-0:1.0: USB hub found
[ 2.302170] hub 7-0:1.0: 2 ports detected
[ 2.302236] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.302269] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.302271] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.302325] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 2.302377] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
[ 2.302463] usb usb8: configuration #1 chosen from 1 choice
[ 2.302518] hub 8-0:1.0: USB hub found
[ 2.302550] hub 8-0:1.0: 2 ports detected
[ 2.302657] PNP: No PS/2 controller found. Probing ports directly.
[ 2.305210] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.305243] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.305326] mice: PS/2 mouse device common for all mice
[ 2.305409] Driver 'rtc_cmos' needs updating - please use bus_type methods
[ 2.305459] rtc_cmos 00:03: RTC can wake from S4
[ 2.305516] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.305564] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.305696] device-mapper: uevent: version 1.0.3
[ 2.305796] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
[ 2.305933] device-mapper: multipath: version 1.1.0 loaded
[ 2.305963] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.306209] cpuidle: using governor ladder
[ 2.306238] cpuidle: using governor menu
[ 2.306555] TCP cubic registered
[ 2.306690] NET: Registered protocol family 10
[ 2.307098] lo: Disabled Privacy Extensions
[ 2.307359] NET: Registered protocol family 17
[ 2.307402] Bluetooth: L2CAP ver 2.14
[ 2.307430] Bluetooth: L2CAP socket layer initialized
[ 2.307459] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.307488] Bluetooth: SCO socket layer initialized
[ 2.307541] Bluetooth: RFCOMM TTY layer initialized
[ 2.307571] Bluetooth: RFCOMM socket layer initialized
[ 2.307600] Bluetooth: RFCOMM ver 1.11
[ 2.307705] PM: Resume from disk failed.
[ 2.307716] registered taskstats version 1
[ 2.308129] Magic number: 2:873:295
[ 2.308180] tty tty28: hash matches
[ 2.308255] rtc_cmos 00:03: setting system clock to 2010-03-14 20:15:59 UTC (1268597759)
[ 2.308289] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.308318] EDD information not available.
[ 2.503221] ata9.00: ATA-6: ST340014A, 8.01, max UDMA/100
[ 2.503252] ata9.00: 78165360 sectors, multi 0: LBA48
[ 2.540848] ata9.00: configured for UDMA/100
[ 2.602509] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 2.612524] ata7: SATA link down (SStatus 0 SControl 300)
[ 2.612580] ata8: SATA link down (SStatus 0 SControl 300)
[ 2.770012] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.771754] ata1.00: ATA-8: ST3500320AS, SD1A, max UDMA/133
[ 2.771785] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.773888] ata1.00: configured for UDMA/133
[ 2.790135] scsi 0:0:0:0: Direct-Access ATA ST3500320AS SD1A PQ: 0 ANSI: 5
[ 2.790300] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.790336] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.790418] sd 0:0:0:0: [sda] Write Protect is off
[ 2.790448] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.790468] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.790619] sda: sda1 < > sda2
[ 2.808754] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.885093] usb 1-1: configuration #1 chosen from 1 choice
[ 3.120008] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 3.387999] usb 2-1: configuration #1 chosen from 1 choice
[ 3.720010] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.721636] ata2.00: ATA-8: ST3500320AS, SD1A, max UDMA/133
[ 3.721666] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 3.723642] ata2.00: configured for UDMA/133
[ 3.740062] scsi 1:0:0:0: Direct-Access ATA ST3500320AS SD1A PQ: 0 ANSI: 5
[ 3.740183] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 3.740205] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 3.740287] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.740316] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.740336] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.740470] sdb: unknown partition table
[ 3.760762] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.900009] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 4.084451] usb 5-1: configuration #1 chosen from 1 choice
[ 4.090013] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.360009] usb 7-2: new full speed USB device using uhci_hcd and address 2
[ 4.460011] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.541211] usb 7-2: configuration #1 chosen from 1 choice
[ 4.822516] usb 8-1: new low speed USB device using uhci_hcd and address 2
[ 5.002613] usb 8-1: configuration #1 chosen from 1 choice
[ 5.282507] usb 8-2: new low speed USB device using uhci_hcd and address 3
[ 5.412510] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.412733] ata5.00: ATAPI: ASUS DRW-20B1LT, 1.00, max UDMA/100
[ 5.413420] ata5.00: configured for UDMA/100
[ 5.430982] scsi 4:0:0:0: CD-ROM ASUS DRW-20B1LT 1.00 PQ: 0 ANSI: 5
[ 5.436189] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.436225] Uniform CD-ROM driver Revision: 3.20
[ 5.436316] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 5.436356] sr 4:0:0:0: Attached scsi generic sg2 type 5
[ 5.462636] usb 8-2: configuration #1 chosen from 1 choice
[ 5.780011] ata6: SATA link down (SStatus 0 SControl 300)
[ 5.802587] scsi 8:0:0:0: Direct-Access ATA ST340014A 8.01 PQ: 0 ANSI: 5
[ 5.802710] sd 8:0:0:0: [sdc] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 5.802716] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 5.802855] sd 8:0:0:0: [sdc] Write Protect is off
[ 5.802885] sd 8:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 5.802906] sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.803058] sdc: sdc1 sdc2
[ 5.822801] sd 8:0:0:0: [sdc] Attached SCSI disk
[ 5.971482] Freeing unused kernel memory: 688k freed
[ 5.971649] Write protecting the kernel read-only data: 7648k
[ 6.057998] ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.058048] ATL1E 0000:02:00.0: setting latency timer to 64
[ 6.097374] Initializing USB Mass Storage driver...
[ 6.106556] usbcore: registered new interface driver hiddev
[ 6.107656] scsi10 : SCSI emulation for USB Mass Storage devices
[ 6.109151] usbcore: registered new interface driver usb-storage
[ 6.109266] USB Mass Storage support registered.
[ 6.109581] usb-storage: device found at 2
[ 6.109583] usb-storage: waiting for device to settle before scanning
[ 6.111499] ohci1394 0000:05:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 6.112021] input: Hanvon Tablet as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input3
[ 6.112143] generic-usb 0003:0B57:8502.0001: input,hiddev96,hidraw0: USB HID v1.00 Device [Hanvon Tablet] on usb-0000:00:1a.2-1/input0
[ 6.124828] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input4
[ 6.124925] generic-usb 0003:046D:C03E.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1/input0
[ 6.138885] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input5
[ 6.138995] generic-usb 0003:046D:C315.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1d.2-2/input0
[ 6.139059] usbcore: registered new interface driver usbhid
[ 6.139091] usbhid: v2.6:USB HID core driver
[ 6.173289] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[febfe000-febfe7ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 7.261708] PM: Starting manual resume from disk
[ 7.261741] PM: Resume from partition 252:2
[ 7.261742] PM: Checking hibernation image.
[ 7.261966] PM: Error -22 checking image file
[ 7.261968] PM: Resume from disk failed.
[ 7.301756] EXT4-fs (dm-1): mounted filesystem with ordered data mode
[ 7.490149] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c0001931fcb]
[ 11.100144] usb-storage: device scan complete
[ 11.100615] scsi 10:0:0:0: Direct-Access Generic Compact Flash 0.00 PQ: 0 ANSI: 2
[ 11.101114] scsi 10:0:0:1: Direct-Access Generic SD/MMC 0.00 PQ: 0 ANSI: 2
[ 11.101609] scsi 10:0:0:2: Direct-Access Generic microSD 0.00 PQ: 0 ANSI: 2
[ 11.102110] scsi 10:0:0:3: Direct-Access Generic MS/MS-PRO 0.00 PQ: 0 ANSI: 2
[ 11.102609] scsi 10:0:0:4: Direct-Access Generic SM/xD-Picture 0.00 PQ: 0 ANSI: 2
[ 11.103013] sd 10:0:0:0: Attached scsi generic sg4 type 0
[ 11.103129] sd 10:0:0:1: Attached scsi generic sg5 type 0
[ 11.103253] sd 10:0:0:2: Attached scsi generic sg6 type 0
[ 11.103375] sd 10:0:0:3: Attached scsi generic sg7 type 0
[ 11.103498] sd 10:0:0:4: Attached scsi generic sg8 type 0
[ 11.106725] sd 10:0:0:0: [sdd] Attached SCSI removable disk
[ 11.107353] sd 10:0:0:1: [sde] Attached SCSI removable disk
[ 11.107981] sd 10:0:0:2: [sdf] Attached SCSI removable disk
[ 11.108604] sd 10:0:0:3: [sdg] Attached SCSI removable disk
[ 11.109225] sd 10:0:0:4: [sdh] Attached SCSI removable disk
[ 14.940019] udev: starting version 147
[ 14.968035] Adding 3903784k swap on /dev/mapper/isw_bgccbabfgf_SYSTEM5. Priority:-1 extents:1 across:3903784k
[ 15.681059] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 15.742288] lp: driver loaded but no devices found
[ 15.766937] alloc irq_desc for 29 on node -1
[ 15.766946] alloc kstat_irqs on node -1
[ 15.766960] ATL1E 0000:02:00.0: irq 29 for MSI/MSI-X
[ 15.767229] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.768074] ATL1E 0000:02:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 15.768273] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 15.979037] Linux video capture interface: v2.00
[ 16.795287] uvcvideo: Found UVC 1.00 device <unnamed> (046d:080f)
[ 16.810377] input: UVC Camera (046d:080f) as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/input/input6
[ 16.810435] usbcore: registered new interface driver uvcvideo
[ 16.810438] USB Video Class driver (v0.1.0)
[ 16.909748] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
[ 17.002767] flexcop-pci: will use the HW PID filter.
[ 17.002773] flexcop-pci: card revision 1
[ 17.002782] b2c2_flexcop_pci 0000:05:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 17.041288] DVB: registering new adapter (FlexCop Digital TV device)
[ 17.042849] b2c2-flexcop: MAC address = 00:d0:d7:02:3d:87
[ 17.043485] CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121)
[ 17.043522] CX24123: wrong demod revision: 87
[ 17.254755] saa7130/34: v4l2 driver version 0.2.15 loaded
[ 17.651036] b2c2-flexcop: found 'ST STV0299 DVB-S' .
[ 17.651040] DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)...
[ 17.651090] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S rev 2.6' at the 'PCI' bus controlled by a 'FlexCopII' complete
[ 17.653302] saa7134 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 17.653308] saa7133[0]: found at 0000:05:00.0, rev: 209, irq: 16, latency: 64, mmio: 0xfebff800
[ 17.653314] saa7133[0]: subsystem: 1043:4845, board: ASUS TV-FM 7135 [card=53,autodetected]
[ 17.653331] saa7133[0]: board init: gpio is 40000
[ 17.653336] IRQ 16/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 17.840011] saa7133[0]: i2c eeprom 00: 43 10 45 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[ 17.840020] saa7133[0]: i2c eeprom 10: 00 ff e2 0f ff 20 ff ff ff ff ff ff ff ff ff ff
[ 17.840028] saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 88 ff ff ff ff
[ 17.840035] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 17.840043] saa7133[0]: i2c eeprom 40: ff 22 00 c2 96 ff 02 30 15 ff ff ff ff ff ff ff
[ 17.840050] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 17.840058] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 17.840065] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 17.840072] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 17.840080] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 17.840088] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 17.840095] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 17.840102] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 17.840110] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 17.840117] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 17.840125] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 17.840134] i2c i2c-3: Invalid 7-bit address 0x7a
[ 17.840617] saa7133[0]: P7131 analog only, using entry of ASUSTeK P7131 Analog
[ 17.840707] input: saa7134 IR (ASUSTeK P7131 Analo as /devices/pci0000:00/0000:00:1e.0/0000:05:00.0/input/input7
[ 17.882211] alloc irq_desc for 22 on node -1
[ 17.882215] alloc kstat_irqs on node -1
[ 17.882221] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 17.882256] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 18.033350] hda_codec: ALC1200: BIOS auto-probing.
[ 18.034772] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 18.038564] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 18.038585] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 18.040272] tuner 3-004b: chip found @ 0x96 (saa7133[0])
[ 18.210040] tda829x 3-004b: setting tuner address to 61
[ 18.370046] tda829x 3-004b: type set to tda8290+75a
[ 23.920086] saa7133[0]: registered device video1 [v4l2]
[ 23.920110] saa7133[0]: registered device vbi0
[ 23.920132] saa7133[0]: registered device radio0
[ 23.948454] saa7134 ALSA driver for DMA sound loaded
[ 23.948465] IRQ 16/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 23.948486] saa7133[0]/alsa: saa7133[0] at 0xfebff800 irq 16 registered as card -2
[ 25.822513] eth0: no IPv6 routers present
[ 30.472960] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 30.652814] ppdev: user-space parallel port driver
