Re: [PATCH v1 028/107] media: ti-vpe: cal: Remove internal phy structure from cal_camerarx

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Laurent,

Never mind my last comment then.... sigh

Benoit

Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> wrote on Mon [2020-Jun-15 02:58:25 +0300]:
> The cal_camerarx structure describes the PHY, there's no need for an
> internal structure named phy. Removed that level of indirection.
> 
> Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> ---
>  drivers/media/platform/ti-vpe/cal.c | 27 ++++++++++++---------------
>  1 file changed, 12 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/media/platform/ti-vpe/cal.c b/drivers/media/platform/ti-vpe/cal.c
> index 8864a00a22b0..9b905b61148f 100644
> --- a/drivers/media/platform/ti-vpe/cal.c
> +++ b/drivers/media/platform/ti-vpe/cal.c
> @@ -324,10 +324,7 @@ struct cal_camerarx {
>  	void __iomem		*base;
>  	struct resource		*res;
>  	struct platform_device	*pdev;
> -
> -	struct {
> -		struct regmap_field *fields[F_MAX_FIELDS];
> -	} phy;
> +	struct regmap_field	*fields[F_MAX_FIELDS];
>  };
>  
>  struct cal_dev {
> @@ -491,12 +488,12 @@ static int cal_camerarx_regmap_init(struct cal_dev *cal,
>  		 * Here we update the reg offset with the
>  		 * value found in DT
>  		 */
> -		phy->phy.fields[i] = devm_regmap_field_alloc(&cal->pdev->dev,
> -							     cal->syscon_camerrx,
> -							     field);
> -		if (IS_ERR(phy->phy.fields[i])) {
> +		phy->fields[i] = devm_regmap_field_alloc(&cal->pdev->dev,
> +							 cal->syscon_camerrx,
> +							 field);
> +		if (IS_ERR(phy->fields[i])) {
>  			cal_err(cal, "Unable to allocate regmap fields\n");
> -			return PTR_ERR(phy->phy.fields[i]);
> +			return PTR_ERR(phy->fields[i]);
>  		}
>  	}
>  
> @@ -543,14 +540,14 @@ static void camerarx_phy_enable(struct cal_ctx *ctx)
>  	struct cal_camerarx *phy = ctx->cal->phy[phy_id];
>  	u32 max_lanes;
>  
> -	regmap_field_write(phy->phy.fields[F_CAMMODE], 0);
> +	regmap_field_write(phy->fields[F_CAMMODE], 0);
>  	/* Always enable all lanes at the phy control level */
>  	max_lanes = (1 << cal_data_get_phy_max_lanes(ctx)) - 1;
> -	regmap_field_write(phy->phy.fields[F_LANEENABLE], max_lanes);
> +	regmap_field_write(phy->fields[F_LANEENABLE], max_lanes);
>  	/* F_CSI_MODE is not present on every architecture */
> -	if (phy->phy.fields[F_CSI_MODE])
> -		regmap_field_write(phy->phy.fields[F_CSI_MODE], 1);
> -	regmap_field_write(phy->phy.fields[F_CTRLCLKEN], 1);
> +	if (phy->fields[F_CSI_MODE])
> +		regmap_field_write(phy->fields[F_CSI_MODE], 1);
> +	regmap_field_write(phy->fields[F_CTRLCLKEN], 1);
>  }
>  
>  static void camerarx_phy_disable(struct cal_ctx *ctx)
> @@ -558,7 +555,7 @@ static void camerarx_phy_disable(struct cal_ctx *ctx)
>  	u32 phy_id = ctx->csi2_port;
>  	struct cal_camerarx *phy = ctx->cal->phy[phy_id];
>  
> -	regmap_field_write(phy->phy.fields[F_CTRLCLKEN], 0);
> +	regmap_field_write(phy->fields[F_CTRLCLKEN], 0);
>  }
>  
>  /*
> -- 
> Regards,
> 
> Laurent Pinchart
> 



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux