Re: [PATCH] rcar-csi2: Rename confirm_start() to phy_post_init() to match its usage

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Niklas,

On Thu, Jun 11, 2020 at 09:32:32PM +0200, Niklas Söderlund wrote:
> Since the driver was picked-up the starting of the PHY have changed
> quiet a bit. An artifact of these changes is the now poorly named
> callback confirm_start(). It used to confirm start of the PHY but now
> performs post PHY start initialization, rename it to phy_post_init() to
> reflect this.
>
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>

Seems reasonable
Acked-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>

Thanks
  j

> ---
>  drivers/media/platform/rcar-vin/rcar-csi2.c | 14 +++++++-------
>  1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
> index 151e6a90c5fbc70e..6dbfac9dcf775f84 100644
> --- a/drivers/media/platform/rcar-vin/rcar-csi2.c
> +++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
> @@ -344,7 +344,7 @@ enum rcar_csi2_pads {
>
>  struct rcar_csi2_info {
>  	int (*init_phtw)(struct rcar_csi2 *priv, unsigned int mbps);
> -	int (*confirm_start)(struct rcar_csi2 *priv);
> +	int (*phy_post_init)(struct rcar_csi2 *priv);
>  	const struct rcsi2_mbps_reg *hsfreqrange;
>  	unsigned int csi0clkfreqrange;
>  	unsigned int num_channels;
> @@ -575,9 +575,9 @@ static int rcsi2_start_receiver(struct rcar_csi2 *priv)
>  	if (ret)
>  		return ret;
>
> -	/* Confirm start */
> -	if (priv->info->confirm_start) {
> -		ret = priv->info->confirm_start(priv);
> +	/* Run post PHY start initialization, if needed. */
> +	if (priv->info->phy_post_init) {
> +		ret = priv->info->phy_post_init(priv);
>  		if (ret)
>  			return ret;
>  	}
> @@ -975,7 +975,7 @@ static int rcsi2_init_phtw_v3m_e3(struct rcar_csi2 *priv, unsigned int mbps)
>  	return rcsi2_phtw_write_mbps(priv, mbps, phtw_mbps_v3m_e3, 0x44);
>  }
>
> -static int rcsi2_confirm_start_v3m_e3(struct rcar_csi2 *priv)
> +static int rcsi2_phy_post_init_v3m_e3(struct rcar_csi2 *priv)
>  {
>  	static const struct phtw_value step1[] = {
>  		{ .data = 0xee, .code = 0x34 },
> @@ -1059,7 +1059,7 @@ static const struct rcar_csi2_info rcar_csi2_info_r8a77965 = {
>
>  static const struct rcar_csi2_info rcar_csi2_info_r8a77970 = {
>  	.init_phtw = rcsi2_init_phtw_v3m_e3,
> -	.confirm_start = rcsi2_confirm_start_v3m_e3,
> +	.phy_post_init = rcsi2_phy_post_init_v3m_e3,
>  	.num_channels = 4,
>  };
>
> @@ -1072,7 +1072,7 @@ static const struct rcar_csi2_info rcar_csi2_info_r8a77980 = {
>
>  static const struct rcar_csi2_info rcar_csi2_info_r8a77990 = {
>  	.init_phtw = rcsi2_init_phtw_v3m_e3,
> -	.confirm_start = rcsi2_confirm_start_v3m_e3,
> +	.phy_post_init = rcsi2_phy_post_init_v3m_e3,
>  	.num_channels = 2,
>  };
>
> --
> 2.27.0
>



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux