Implementation of media controller centric device configuration will add
code to the CAMERARX support section, which is already quite big. Move
it to a separate file to make the code more manageable. No functional
change is included.
The cal_camerarx_init_regmap() function is kept in cal.c and renamed to
cal_init_camerarx_regmap() as it's not specific to one CAMERARX
instance, but related to the whole CAL device.
Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
drivers/media/platform/ti-vpe/Makefile | 2 +-
drivers/media/platform/ti-vpe/cal-camerarx.c | 637 ++++++++++++++++
drivers/media/platform/ti-vpe/cal.c | 727 ++-----------------
drivers/media/platform/ti-vpe/cal.h | 5 +
4 files changed, 701 insertions(+), 670 deletions(-)
create mode 100644 drivers/media/platform/ti-vpe/cal-camerarx.c
diff --git a/drivers/media/platform/ti-vpe/Makefile b/drivers/media/platform/ti-vpe/Makefile
index a7bf8f2a1386..ad624056e039 100644
--- a/drivers/media/platform/ti-vpe/Makefile
+++ b/drivers/media/platform/ti-vpe/Makefile
@@ -13,4 +13,4 @@ ccflags-$(CONFIG_VIDEO_TI_VPE_DEBUG) += -DDEBUG
obj-$(CONFIG_VIDEO_TI_CAL) += ti-cal.o
-ti-cal-y := cal.o cal-video.o
+ti-cal-y := cal.o cal-camerarx.o cal-video.o
diff --git a/drivers/media/platform/ti-vpe/cal-camerarx.c b/drivers/media/platform/ti-vpe/cal-camerarx.c
new file mode 100644
index 000000000000..a7e4b81c9734
--- /dev/null
+++ b/drivers/media/platform/ti-vpe/cal-camerarx.c
@@ -0,0 +1,637 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * TI Camera Access Layer (CAL) - CAMERARX
+ *
+ * Copyright (c) 2015-2020 Texas Instruments Inc.
+ *
+ * Authors:
+ * Benoit Parrot <bparrot@xxxxxx>
+ * Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_graph.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-subdev.h>
+
+#include "cal.h"
+#include "cal_regs.h"
+
+/* ------------------------------------------------------------------
+ * I/O Register Accessors
+ * ------------------------------------------------------------------
+ */
+
+static inline u32 camerarx_read(struct cal_camerarx *phy, u32 offset)
+{
+ return ioread32(phy->base + offset);
+}
+
+static inline void camerarx_write(struct cal_camerarx *phy, u32 offset, u32 val)
+{
+ iowrite32(val, phy->base + offset);
+}
+
+/* ------------------------------------------------------------------
+ * CAMERARX Management
+ * ------------------------------------------------------------------
+ */
+
+static s64 cal_camerarx_get_external_rate(struct cal_camerarx *phy)
+{
+ struct v4l2_ctrl *ctrl;
+ s64 rate;
+
+ ctrl = v4l2_ctrl_find(phy->sensor->ctrl_handler, V4L2_CID_PIXEL_RATE);
+ if (!ctrl) {
+ phy_err(phy, "no pixel rate control in subdev: %s\n",
+ phy->sensor->name);
+ return -EPIPE;
+ }
+
+ rate = v4l2_ctrl_g_ctrl_int64(ctrl);
+ phy_dbg(3, phy, "sensor Pixel Rate: %llu\n", rate);
+
+ return rate;
+}
+
+static void cal_camerarx_lane_config(struct cal_camerarx *phy)
+{
+ u32 val = cal_read(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance));
+ u32 lane_mask = CAL_CSI2_COMPLEXIO_CFG_CLOCK_POSITION_MASK;
+ u32 polarity_mask = CAL_CSI2_COMPLEXIO_CFG_CLOCK_POL_MASK;
+ struct v4l2_fwnode_bus_mipi_csi2 *mipi_csi2 =
+ &phy->endpoint.bus.mipi_csi2;
+ int lane;
+
+ cal_set_field(&val, mipi_csi2->clock_lane + 1, lane_mask);
+ cal_set_field(&val, mipi_csi2->lane_polarities[0], polarity_mask);
+ for (lane = 0; lane < mipi_csi2->num_data_lanes; lane++) {
+ /*
+ * Every lane are one nibble apart starting with the
+ * clock followed by the data lanes so shift masks by 4.
+ */
+ lane_mask <<= 4;
+ polarity_mask <<= 4;
+ cal_set_field(&val, mipi_csi2->data_lanes[lane] + 1, lane_mask);
+ cal_set_field(&val, mipi_csi2->lane_polarities[lane + 1],
+ polarity_mask);
+ }
+
+ cal_write(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance), val);
+ phy_dbg(3, phy, "CAL_CSI2_COMPLEXIO_CFG(%d) = 0x%08x\n",
+ phy->instance, val);
+}
+
+static void cal_camerarx_enable(struct cal_camerarx *phy)
+{
+ u32 num_lanes = phy->cal->data->camerarx[phy->instance].num_lanes;
+
+ regmap_field_write(phy->fields[F_CAMMODE], 0);
+ /* Always enable all lanes at the phy control level */
+ regmap_field_write(phy->fields[F_LANEENABLE], (1 << num_lanes) - 1);
+ /* F_CSI_MODE is not present on every architecture */
+ if (phy->fields[F_CSI_MODE])
+ regmap_field_write(phy->fields[F_CSI_MODE], 1);
+ regmap_field_write(phy->fields[F_CTRLCLKEN], 1);
+}
+
+void cal_camerarx_disable(struct cal_camerarx *phy)
+{
+ regmap_field_write(phy->fields[F_CTRLCLKEN], 0);
+}
+
+/*
+ * TCLK values are OK at their reset values
+ */
+#define TCLK_TERM 0
+#define TCLK_MISS 1
+#define TCLK_SETTLE 14
+
+static void cal_camerarx_config(struct cal_camerarx *phy, s64 external_rate,
+ const struct cal_fmt *fmt)
+{
+ unsigned int reg0, reg1;
+ unsigned int ths_term, ths_settle;
+ unsigned int csi2_ddrclk_khz;
+ struct v4l2_fwnode_bus_mipi_csi2 *mipi_csi2 =
+ &phy->endpoint.bus.mipi_csi2;
+ u32 num_lanes = mipi_csi2->num_data_lanes;
+
+ /* DPHY timing configuration */
+ /* CSI-2 is DDR and we only count used lanes. */
+ csi2_ddrclk_khz = external_rate / 1000
+ / (2 * num_lanes) * fmt->bpp;
+ phy_dbg(1, phy, "csi2_ddrclk_khz: %d\n", csi2_ddrclk_khz);
+
+ /* THS_TERM: Programmed value = floor(20 ns/DDRClk period) */
+ ths_term = 20 * csi2_ddrclk_khz / 1000000;
+ phy_dbg(1, phy, "ths_term: %d (0x%02x)\n", ths_term, ths_term);
+
+ /* THS_SETTLE: Programmed value = floor(105 ns/DDRClk period) + 4 */
+ ths_settle = (105 * csi2_ddrclk_khz / 1000000) + 4;
+ phy_dbg(1, phy, "ths_settle: %d (0x%02x)\n", ths_settle, ths_settle);
+
+ reg0 = camerarx_read(phy, CAL_CSI2_PHY_REG0);
+ cal_set_field(®0, CAL_CSI2_PHY_REG0_HSCLOCKCONFIG_DISABLE,
+ CAL_CSI2_PHY_REG0_HSCLOCKCONFIG_MASK);
+ cal_set_field(®0, ths_term, CAL_CSI2_PHY_REG0_THS_TERM_MASK);
+ cal_set_field(®0, ths_settle, CAL_CSI2_PHY_REG0_THS_SETTLE_MASK);
+
+ phy_dbg(1, phy, "CSI2_%d_REG0 = 0x%08x\n", phy->instance, reg0);
+ camerarx_write(phy, CAL_CSI2_PHY_REG0, reg0);
+
+ reg1 = camerarx_read(phy, CAL_CSI2_PHY_REG1);
+ cal_set_field(®1, TCLK_TERM, CAL_CSI2_PHY_REG1_TCLK_TERM_MASK);
+ cal_set_field(®1, 0xb8, CAL_CSI2_PHY_REG1_DPHY_HS_SYNC_PATTERN_MASK);
+ cal_set_field(®1, TCLK_MISS,
+ CAL_CSI2_PHY_REG1_CTRLCLK_DIV_FACTOR_MASK);
+ cal_set_field(®1, TCLK_SETTLE, CAL_CSI2_PHY_REG1_TCLK_SETTLE_MASK);
+
+ phy_dbg(1, phy, "CSI2_%d_REG1 = 0x%08x\n", phy->instance, reg1);
+ camerarx_write(phy, CAL_CSI2_PHY_REG1, reg1);
+}
+
+static void cal_camerarx_power(struct cal_camerarx *phy, bool enable)
+{
+ u32 target_state;
+ unsigned int i;
+
+ target_state = enable ? CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_STATE_ON :
+ CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_STATE_OFF;
+
+ cal_write_field(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance),
+ target_state, CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_MASK);
+
+ for (i = 0; i < 10; i++) {
+ u32 current_state;
+
+ current_state = cal_read_field(phy->cal,
+ CAL_CSI2_COMPLEXIO_CFG(phy->instance),
+ CAL_CSI2_COMPLEXIO_CFG_PWR_STATUS_MASK);
+
+ if (current_state == target_state)
+ break;
+
+ usleep_range(1000, 1100);
+ }
+
+ if (i == 10)
+ phy_err(phy, "Failed to power %s complexio\n",
+ enable ? "up" : "down");
+}
+
+static void cal_camerarx_wait_reset(struct cal_camerarx *phy)
+{
+ unsigned long timeout;
+
+ timeout = jiffies + msecs_to_jiffies(750);
+ while (time_before(jiffies, timeout)) {
+ if (cal_read_field(phy->cal,
+ CAL_CSI2_COMPLEXIO_CFG(phy->instance),
+ CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_MASK) ==
+ CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_RESETCOMPLETED)
+ break;
+ usleep_range(500, 5000);
+ }
+
+ if (cal_read_field(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance),
+ CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_MASK) !=
+ CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_RESETCOMPLETED)
+ phy_err(phy, "Timeout waiting for Complex IO reset done\n");
+}
+
+static void cal_camerarx_wait_stop_state(struct cal_camerarx *phy)
+{
+ unsigned long timeout;
+
+ timeout = jiffies + msecs_to_jiffies(750);
+ while (time_before(jiffies, timeout)) {
+ if (cal_read_field(phy->cal,
+ CAL_CSI2_TIMING(phy->instance),
+ CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_MASK) == 0)
+ break;
+ usleep_range(500, 5000);
+ }
+
+ if (cal_read_field(phy->cal, CAL_CSI2_TIMING(phy->instance),
+ CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_MASK) != 0)
+ phy_err(phy, "Timeout waiting for stop state\n");
+}
+
+int cal_camerarx_start(struct cal_camerarx *phy, const struct cal_fmt *fmt)
+{
+ s64 external_rate;
+ u32 sscounter;
+ u32 val;
+ int ret;
+
+ external_rate = cal_camerarx_get_external_rate(phy);
+ if (external_rate < 0)
+ return external_rate;
+
+ ret = v4l2_subdev_call(phy->sensor, core, s_power, 1);
+ if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV) {
+ phy_err(phy, "power on failed in subdev\n");
+ return ret;
+ }
+
+ /*
+ * CSI-2 PHY Link Initialization Sequence, according to the DRA74xP /
+ * DRA75xP / DRA76xP / DRA77xP TRM. The DRA71x / DRA72x and the AM65x /
+ * DRA80xM TRMs have a a slightly simplified sequence.
+ */
+
+ /*
+ * 1. Configure all CSI-2 low level protocol registers to be ready to
+ * receive signals/data from the CSI-2 PHY.
+ *
+ * i.-v. Configure the lanes position and polarity.
+ */
+ cal_camerarx_lane_config(phy);
+
+ /*
+ * vi.-vii. Configure D-PHY mode, enable the required lanes and
+ * enable the CAMERARX clock.
+ */
+ cal_camerarx_enable(phy);
+
+ /*
+ * 2. CSI PHY and link initialization sequence.
+ *
+ * a. Deassert the CSI-2 PHY reset. Do not wait for reset completion
+ * at this point, as it requires the external sensor to send the
+ * CSI-2 HS clock.
+ */
+ cal_write_field(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance),
+ CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_OPERATIONAL,
+ CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_MASK);
+ phy_dbg(3, phy, "CAL_CSI2_COMPLEXIO_CFG(%d) = 0x%08x De-assert Complex IO Reset\n",
+ phy->instance,
+ cal_read(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance)));
+
+ /* Dummy read to allow SCP reset to complete. */
+ camerarx_read(phy, CAL_CSI2_PHY_REG0);
+
+ /* Program the PHY timing parameters. */
+ cal_camerarx_config(phy, external_rate, fmt);
+
+ /*
+ * b. Assert the FORCERXMODE signal.
+ *
+ * The stop-state-counter is based on fclk cycles, and we always use
+ * the x16 and x4 settings, so stop-state-timeout =
+ * fclk-cycle * 16 * 4 * counter.
+ *
+ * Stop-state-timeout must be more than 100us as per CSI-2 spec, so we
+ * calculate a timeout that's 100us (rounding up).
+ */
+ sscounter = DIV_ROUND_UP(clk_get_rate(phy->cal->fclk), 10000 * 16 * 4);
+
+ val = cal_read(phy->cal, CAL_CSI2_TIMING(phy->instance));
+ cal_set_field(&val, 1, CAL_CSI2_TIMING_STOP_STATE_X16_IO1_MASK);
+ cal_set_field(&val, 1, CAL_CSI2_TIMING_STOP_STATE_X4_IO1_MASK);
+ cal_set_field(&val, sscounter,
+ CAL_CSI2_TIMING_STOP_STATE_COUNTER_IO1_MASK);
+ cal_write(phy->cal, CAL_CSI2_TIMING(phy->instance), val);
+ phy_dbg(3, phy, "CAL_CSI2_TIMING(%d) = 0x%08x Stop States\n",
+ phy->instance,
+ cal_read(phy->cal, CAL_CSI2_TIMING(phy->instance)));
+
+ /* Assert the FORCERXMODE signal. */
+ cal_write_field(phy->cal, CAL_CSI2_TIMING(phy->instance),
+ 1, CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_MASK);
+ phy_dbg(3, phy, "CAL_CSI2_TIMING(%d) = 0x%08x Force RXMODE\n",
+ phy->instance,
+ cal_read(phy->cal, CAL_CSI2_TIMING(phy->instance)));
+
+ /*
+ * c. Connect pull-down on CSI-2 PHY link (using pad control).
+ *
+ * This is not required on DRA71x, DRA72x, AM65x and DRA80xM. Not
+ * implemented.
+ */
+
+ /*
+ * d. Power up the CSI-2 PHY.
+ * e. Check whether the state status reaches the ON state.
+ */
+ cal_camerarx_power(phy, true);
+
+ /*
+ * Start the sensor to enable the CSI-2 HS clock. We can now wait for
+ * CSI-2 PHY reset to complete.
+ */
+ ret = v4l2_subdev_call(phy->sensor, video, s_stream, 1);
+ if (ret) {
+ v4l2_subdev_call(phy->sensor, core, s_power, 0);
+ phy_err(phy, "stream on failed in subdev\n");
+ return ret;
+ }
+
+ cal_camerarx_wait_reset(phy);
+
+ /* f. Wait for STOPSTATE=1 for all enabled lane modules. */
+ cal_camerarx_wait_stop_state(phy);
+
+ phy_dbg(1, phy, "CSI2_%u_REG1 = 0x%08x (bits 31-28 should be set)\n",
+ phy->instance, camerarx_read(phy, CAL_CSI2_PHY_REG1));
+
+ /*
+ * g. Disable pull-down on CSI-2 PHY link (using pad control).
+ *
+ * This is not required on DRA71x, DRA72x, AM65x and DRA80xM. Not
+ * implemented.
+ */
+
+ return 0;
+}
+
+void cal_camerarx_stop(struct cal_camerarx *phy)
+{
+ unsigned int i;
+ int ret;
+
+ cal_camerarx_power(phy, false);
+
+ /* Assert Complex IO Reset */
+ cal_write_field(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance),
+ CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL,
+ CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_MASK);
+
+ /* Wait for power down completion */
+ for (i = 0; i < 10; i++) {
+ if (cal_read_field(phy->cal,
+ CAL_CSI2_COMPLEXIO_CFG(phy->instance),
+ CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_MASK) ==
+ CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_RESETONGOING)
+ break;
+ usleep_range(1000, 1100);
+ }
+ phy_dbg(3, phy, "CAL_CSI2_COMPLEXIO_CFG(%d) = 0x%08x Complex IO in Reset (%d) %s\n",
+ phy->instance,
+ cal_read(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance)), i,
+ (i >= 10) ? "(timeout)" : "");
+
+ /* Disable the phy */
+ cal_camerarx_disable(phy);
+
+ if (v4l2_subdev_call(phy->sensor, video, s_stream, 0))
+ phy_err(phy, "stream off failed in subdev\n");
+
+ ret = v4l2_subdev_call(phy->sensor, core, s_power, 0);
+ if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV)
+ phy_err(phy, "power off failed in subdev\n");
+}
+
+/*
+ * Errata i913: CSI2 LDO Needs to be disabled when module is powered on
+ *
+ * Enabling CSI2 LDO shorts it to core supply. It is crucial the 2 CSI2
+ * LDOs on the device are disabled if CSI-2 module is powered on
+ * (0x4845 B304 | 0x4845 B384 [28:27] = 0x1) or in ULPS (0x4845 B304
+ * | 0x4845 B384 [28:27] = 0x2) mode. Common concerns include: high
+ * current draw on the module supply in active mode.
+ *
+ * Errata does not apply when CSI-2 module is powered off
+ * (0x4845 B304 | 0x4845 B384 [28:27] = 0x0).
+ *
+ * SW Workaround:
+ * Set the following register bits to disable the LDO,
+ * which is essentially CSI2 REG10 bit 6:
+ *
+ * Core 0: 0x4845 B828 = 0x0000 0040
+ * Core 1: 0x4845 B928 = 0x0000 0040
+ */
+void cal_camerarx_i913_errata(struct cal_camerarx *phy)
+{
+ u32 reg10 = camerarx_read(phy, CAL_CSI2_PHY_REG10);
+
+ cal_set_field(®10, 1, CAL_CSI2_PHY_REG10_I933_LDO_DISABLE_MASK);
+
+ phy_dbg(1, phy, "CSI2_%d_REG10 = 0x%08x\n", phy->instance, reg10);
+ camerarx_write(phy, CAL_CSI2_PHY_REG10, reg10);
+}
+
+/*
+ * Enable the expected IRQ sources
+ */
+void cal_camerarx_enable_irqs(struct cal_camerarx *phy)
+{
+ u32 val;
+
+ const u32 cio_err_mask =
+ CAL_CSI2_COMPLEXIO_IRQ_LANE_ERRORS_MASK |
+ CAL_CSI2_COMPLEXIO_IRQ_FIFO_OVR_MASK |
+ CAL_CSI2_COMPLEXIO_IRQ_SHORT_PACKET_MASK |
+ CAL_CSI2_COMPLEXIO_IRQ_ECC_NO_CORRECTION_MASK;
+
+ /* Enable CIO error irqs */
+ cal_write(phy->cal, CAL_HL_IRQENABLE_SET(0),
+ CAL_HL_IRQ_CIO_MASK(phy->instance));
+ cal_write(phy->cal, CAL_CSI2_COMPLEXIO_IRQENABLE(phy->instance),
+ cio_err_mask);
+
+ /* Always enable OCPO error */
+ cal_write(phy->cal, CAL_HL_IRQENABLE_SET(0), CAL_HL_IRQ_OCPO_ERR_MASK);
+
+ /* Enable IRQ_WDMA_END 0/1 */
+ val = 0;
+ cal_set_field(&val, 1, CAL_HL_IRQ_MASK(phy->instance));
+ cal_write(phy->cal, CAL_HL_IRQENABLE_SET(1), val);
+ /* Enable IRQ_WDMA_START 0/1 */
+ val = 0;
+ cal_set_field(&val, 1, CAL_HL_IRQ_MASK(phy->instance));
+ cal_write(phy->cal, CAL_HL_IRQENABLE_SET(2), val);
+ /* Todo: Add VC_IRQ and CSI2_COMPLEXIO_IRQ handling */
+ cal_write(phy->cal, CAL_CSI2_VC_IRQENABLE(0), 0xFF000000);
+}
+
+void cal_camerarx_disable_irqs(struct cal_camerarx *phy)
+{
+ u32 val;
+
+ /* Disable CIO error irqs */
+ cal_write(phy->cal, CAL_HL_IRQENABLE_CLR(0),
+ CAL_HL_IRQ_CIO_MASK(phy->instance));
+ cal_write(phy->cal, CAL_CSI2_COMPLEXIO_IRQENABLE(phy->instance), 0);
+
+ /* Disable IRQ_WDMA_END 0/1 */
+ val = 0;
+ cal_set_field(&val, 1, CAL_HL_IRQ_MASK(phy->instance));
+ cal_write(phy->cal, CAL_HL_IRQENABLE_CLR(1), val);
+ /* Disable IRQ_WDMA_START 0/1 */
+ val = 0;
+ cal_set_field(&val, 1, CAL_HL_IRQ_MASK(phy->instance));
+ cal_write(phy->cal, CAL_HL_IRQENABLE_CLR(2), val);
+ /* Todo: Add VC_IRQ and CSI2_COMPLEXIO_IRQ handling */
+ cal_write(phy->cal, CAL_CSI2_VC_IRQENABLE(0), 0);
+}
+
+void cal_camerarx_ppi_enable(struct cal_camerarx *phy)
+{
+ cal_write(phy->cal, CAL_CSI2_PPI_CTRL(phy->instance), BIT(3));
+ cal_write_field(phy->cal, CAL_CSI2_PPI_CTRL(phy->instance),
+ 1, CAL_CSI2_PPI_CTRL_IF_EN_MASK);
+}
+
+void cal_camerarx_ppi_disable(struct cal_camerarx *phy)
+{
+ cal_write_field(phy->cal, CAL_CSI2_PPI_CTRL(phy->instance),
+ 0, CAL_CSI2_PPI_CTRL_IF_EN_MASK);
+}
+
+static int cal_camerarx_regmap_init(struct cal_dev *cal,
+ struct cal_camerarx *phy)
+{
+ const struct cal_camerarx_data *phy_data;
+ unsigned int i;
+
+ if (!cal->data)
+ return -EINVAL;
+
+ phy_data = &cal->data->camerarx[phy->instance];
+
+ for (i = 0; i < F_MAX_FIELDS; i++) {
+ struct reg_field field = {
+ .reg = cal->syscon_camerrx_offset,
+ .lsb = phy_data->fields[i].lsb,
+ .msb = phy_data->fields[i].msb,
+ };
+
+ /*
+ * Here we update the reg offset with the
+ * value found in DT
+ */
+ phy->fields[i] = devm_regmap_field_alloc(cal->dev,
+ cal->syscon_camerrx,
+ field);
+ if (IS_ERR(phy->fields[i])) {
+ cal_err(cal, "Unable to allocate regmap fields\n");
+ return PTR_ERR(phy->fields[i]);
+ }
+ }
+
+ return 0;
+}
+
+static int cal_camerarx_parse_dt(struct cal_camerarx *phy)
+{
+ struct v4l2_fwnode_endpoint *endpoint = &phy->endpoint;
+ struct device_node *ep_node;
+ char data_lanes[V4L2_FWNODE_CSI2_MAX_DATA_LANES * 2];
+ unsigned int i;
+ int ret;
+
+ /*
+ * Find the endpoint node for the port corresponding to the PHY
+ * instance, and parse its CSI-2-related properties.
+ */
+ ep_node = of_graph_get_endpoint_by_regs(phy->cal->dev->of_node,
+ phy->instance, 0);
+ if (!ep_node) {
+ phy_dbg(3, phy, "Can't get endpoint\n");
+ return -EINVAL;
+ }
+
+ endpoint->bus_type = V4L2_MBUS_CSI2_DPHY;
+ ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep_node), endpoint);
+ if (ret < 0) {
+ phy_err(phy, "Failed to parse endpoint\n");
+ goto done;
+ }
+
+ for (i = 0; i < endpoint->bus.mipi_csi2.num_data_lanes; i++) {
+ unsigned int lane = endpoint->bus.mipi_csi2.data_lanes[i];
+
+ if (lane > 4) {
+ phy_err(phy, "Invalid position %u for data lane %u\n",
+ lane, i);
+ ret = -EINVAL;
+ goto done;
+ }
+
+ data_lanes[i*2] = '0' + lane;
+ data_lanes[i*2+1] = ' ';
+ }
+
+ data_lanes[i*2-1] = '\0';
+
+ phy_dbg(3, phy,
+ "CSI-2 bus: clock lane <%u>, data lanes <%s>, flags 0x%08x\n",
+ endpoint->bus.mipi_csi2.clock_lane, data_lanes,
+ endpoint->bus.mipi_csi2.flags);
+
+ /* Retrieve the connected device and store it for later use. */
+ phy->sensor_node = of_graph_get_remote_port_parent(ep_node);
+ if (!phy->sensor_node) {
+ phy_dbg(3, phy, "Can't get remote parent\n");
+ goto done;
+ }
+
+ phy_dbg(1, phy, "Found connected device %pOFn\n", phy->sensor_node);
+
+done:
+ of_node_put(ep_node);
+ return ret;
+}
+
+struct cal_camerarx *cal_camerarx_create(struct cal_dev *cal,
+ unsigned int instance)
+{
+ struct platform_device *pdev = to_platform_device(cal->dev);
+ struct cal_camerarx *phy;
+ int ret;
+
+ phy = kzalloc(sizeof(*phy), GFP_KERNEL);
+ if (!phy)
+ return ERR_PTR(-ENOMEM);
+
+ phy->cal = cal;
+ phy->instance = instance;
+
+ phy->res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ (instance == 0) ?
+ "cal_rx_core0" :
+ "cal_rx_core1");
+ phy->base = devm_ioremap_resource(cal->dev, phy->res);
+ if (IS_ERR(phy->base)) {
+ cal_err(cal, "failed to ioremap\n");
+ ret = PTR_ERR(phy->base);
+ goto error;
+ }
+
+ cal_dbg(1, cal, "ioresource %s at %pa - %pa\n",
+ phy->res->name, &phy->res->start, &phy->res->end);
+
+ ret = cal_camerarx_regmap_init(cal, phy);
+ if (ret)
+ goto error;
+
+ ret = cal_camerarx_parse_dt(phy);
+ if (ret)
+ goto error;
+
+ return phy;
+
+error:
+ kfree(phy);
+ return ERR_PTR(ret);
+}
+
+void cal_camerarx_destroy(struct cal_camerarx *phy)
+{
+ if (!phy)
+ return;
+
+ of_node_put(phy->sensor_node);
+ kfree(phy);
+}
diff --git a/drivers/media/platform/ti-vpe/cal.c b/drivers/media/platform/ti-vpe/cal.c
index abeded3b5e6c..ca8576aa2646 100644
--- a/drivers/media/platform/ti-vpe/cal.c
+++ b/drivers/media/platform/ti-vpe/cal.c
@@ -10,12 +10,10 @@
*/
#include <linux/clk.h>
-#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of_device.h>
-#include <linux/of_graph.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
@@ -25,9 +23,7 @@
#include <media/media-device.h>
#include <media/v4l2-async.h>
#include <media/v4l2-common.h>
-#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
-#include <media/v4l2-fwnode.h>
#include <media/videobuf2-core.h>
#include <media/videobuf2-dma-contig.h>
@@ -155,670 +151,6 @@ void cal_quickdump_regs(struct cal_dev *cal)
}
}
-/* ------------------------------------------------------------------
- * CAMERARX Management
- * ------------------------------------------------------------------
- */
-
-static inline u32 camerarx_read(struct cal_camerarx *phy, u32 offset)
-{
- return ioread32(phy->base + offset);
-}
-
-static inline void camerarx_write(struct cal_camerarx *phy, u32 offset, u32 val)
-{
- iowrite32(val, phy->base + offset);
-}
-
-static s64 cal_camerarx_get_external_rate(struct cal_camerarx *phy)
-{
- struct v4l2_ctrl *ctrl;
- s64 rate;
-
- ctrl = v4l2_ctrl_find(phy->sensor->ctrl_handler, V4L2_CID_PIXEL_RATE);
- if (!ctrl) {
- phy_err(phy, "no pixel rate control in subdev: %s\n",
- phy->sensor->name);
- return -EPIPE;
- }
-
- rate = v4l2_ctrl_g_ctrl_int64(ctrl);
- phy_dbg(3, phy, "sensor Pixel Rate: %llu\n", rate);
-
- return rate;
-}
-
-static void cal_camerarx_lane_config(struct cal_camerarx *phy)
-{
- u32 val = cal_read(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance));
- u32 lane_mask = CAL_CSI2_COMPLEXIO_CFG_CLOCK_POSITION_MASK;
- u32 polarity_mask = CAL_CSI2_COMPLEXIO_CFG_CLOCK_POL_MASK;
- struct v4l2_fwnode_bus_mipi_csi2 *mipi_csi2 =
- &phy->endpoint.bus.mipi_csi2;
- int lane;
-
- cal_set_field(&val, mipi_csi2->clock_lane + 1, lane_mask);
- cal_set_field(&val, mipi_csi2->lane_polarities[0], polarity_mask);
- for (lane = 0; lane < mipi_csi2->num_data_lanes; lane++) {
- /*
- * Every lane are one nibble apart starting with the
- * clock followed by the data lanes so shift masks by 4.
- */
- lane_mask <<= 4;
- polarity_mask <<= 4;
- cal_set_field(&val, mipi_csi2->data_lanes[lane] + 1, lane_mask);
- cal_set_field(&val, mipi_csi2->lane_polarities[lane + 1],
- polarity_mask);
- }
-
- cal_write(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance), val);
- phy_dbg(3, phy, "CAL_CSI2_COMPLEXIO_CFG(%d) = 0x%08x\n",
- phy->instance, val);
-}
-
-static void cal_camerarx_enable(struct cal_camerarx *phy)
-{
- u32 num_lanes = phy->cal->data->camerarx[phy->instance].num_lanes;
-
- regmap_field_write(phy->fields[F_CAMMODE], 0);
- /* Always enable all lanes at the phy control level */
- regmap_field_write(phy->fields[F_LANEENABLE], (1 << num_lanes) - 1);
- /* F_CSI_MODE is not present on every architecture */
- if (phy->fields[F_CSI_MODE])
- regmap_field_write(phy->fields[F_CSI_MODE], 1);
- regmap_field_write(phy->fields[F_CTRLCLKEN], 1);
-}
-
-static void cal_camerarx_disable(struct cal_camerarx *phy)
-{
- regmap_field_write(phy->fields[F_CTRLCLKEN], 0);
-}
-
-/*
- * TCLK values are OK at their reset values
- */
-#define TCLK_TERM 0
-#define TCLK_MISS 1
-#define TCLK_SETTLE 14
-
-static void cal_camerarx_config(struct cal_camerarx *phy, s64 external_rate,
- const struct cal_fmt *fmt)
-{
- unsigned int reg0, reg1;
- unsigned int ths_term, ths_settle;
- unsigned int csi2_ddrclk_khz;
- struct v4l2_fwnode_bus_mipi_csi2 *mipi_csi2 =
- &phy->endpoint.bus.mipi_csi2;
- u32 num_lanes = mipi_csi2->num_data_lanes;
-
- /* DPHY timing configuration */
- /* CSI-2 is DDR and we only count used lanes. */
- csi2_ddrclk_khz = external_rate / 1000
- / (2 * num_lanes) * fmt->bpp;
- phy_dbg(1, phy, "csi2_ddrclk_khz: %d\n", csi2_ddrclk_khz);
-
- /* THS_TERM: Programmed value = floor(20 ns/DDRClk period) */
- ths_term = 20 * csi2_ddrclk_khz / 1000000;
- phy_dbg(1, phy, "ths_term: %d (0x%02x)\n", ths_term, ths_term);
-
- /* THS_SETTLE: Programmed value = floor(105 ns/DDRClk period) + 4 */
- ths_settle = (105 * csi2_ddrclk_khz / 1000000) + 4;
- phy_dbg(1, phy, "ths_settle: %d (0x%02x)\n", ths_settle, ths_settle);
-
- reg0 = camerarx_read(phy, CAL_CSI2_PHY_REG0);
- cal_set_field(®0, CAL_CSI2_PHY_REG0_HSCLOCKCONFIG_DISABLE,
- CAL_CSI2_PHY_REG0_HSCLOCKCONFIG_MASK);
- cal_set_field(®0, ths_term, CAL_CSI2_PHY_REG0_THS_TERM_MASK);
- cal_set_field(®0, ths_settle, CAL_CSI2_PHY_REG0_THS_SETTLE_MASK);
-
- phy_dbg(1, phy, "CSI2_%d_REG0 = 0x%08x\n", phy->instance, reg0);
- camerarx_write(phy, CAL_CSI2_PHY_REG0, reg0);
-
- reg1 = camerarx_read(phy, CAL_CSI2_PHY_REG1);
- cal_set_field(®1, TCLK_TERM, CAL_CSI2_PHY_REG1_TCLK_TERM_MASK);
- cal_set_field(®1, 0xb8, CAL_CSI2_PHY_REG1_DPHY_HS_SYNC_PATTERN_MASK);
- cal_set_field(®1, TCLK_MISS,
- CAL_CSI2_PHY_REG1_CTRLCLK_DIV_FACTOR_MASK);
- cal_set_field(®1, TCLK_SETTLE, CAL_CSI2_PHY_REG1_TCLK_SETTLE_MASK);
-
- phy_dbg(1, phy, "CSI2_%d_REG1 = 0x%08x\n", phy->instance, reg1);
- camerarx_write(phy, CAL_CSI2_PHY_REG1, reg1);
-}
-
-static void cal_camerarx_power(struct cal_camerarx *phy, bool enable)
-{
- u32 target_state;
- unsigned int i;
-
- target_state = enable ? CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_STATE_ON :
- CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_STATE_OFF;
-
- cal_write_field(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance),
- target_state, CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_MASK);
-
- for (i = 0; i < 10; i++) {
- u32 current_state;
-
- current_state = cal_read_field(phy->cal,
- CAL_CSI2_COMPLEXIO_CFG(phy->instance),
- CAL_CSI2_COMPLEXIO_CFG_PWR_STATUS_MASK);
-
- if (current_state == target_state)
- break;
-
- usleep_range(1000, 1100);
- }
-
- if (i == 10)
- phy_err(phy, "Failed to power %s complexio\n",
- enable ? "up" : "down");
-}
-
-static void cal_camerarx_wait_reset(struct cal_camerarx *phy)
-{
- unsigned long timeout;
-
- timeout = jiffies + msecs_to_jiffies(750);
- while (time_before(jiffies, timeout)) {
- if (cal_read_field(phy->cal,
- CAL_CSI2_COMPLEXIO_CFG(phy->instance),
- CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_MASK) ==
- CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_RESETCOMPLETED)
- break;
- usleep_range(500, 5000);
- }
-
- if (cal_read_field(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance),
- CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_MASK) !=
- CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_RESETCOMPLETED)
- phy_err(phy, "Timeout waiting for Complex IO reset done\n");
-}
-
-static void cal_camerarx_wait_stop_state(struct cal_camerarx *phy)
-{
- unsigned long timeout;
-
- timeout = jiffies + msecs_to_jiffies(750);
- while (time_before(jiffies, timeout)) {
- if (cal_read_field(phy->cal,
- CAL_CSI2_TIMING(phy->instance),
- CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_MASK) == 0)
- break;
- usleep_range(500, 5000);
- }
-
- if (cal_read_field(phy->cal, CAL_CSI2_TIMING(phy->instance),
- CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_MASK) != 0)
- phy_err(phy, "Timeout waiting for stop state\n");
-}
-
-int cal_camerarx_start(struct cal_camerarx *phy, const struct cal_fmt *fmt)
-{
- s64 external_rate;
- u32 sscounter;
- u32 val;
- int ret;
-
- external_rate = cal_camerarx_get_external_rate(phy);
- if (external_rate < 0)
- return external_rate;
-
- ret = v4l2_subdev_call(phy->sensor, core, s_power, 1);
- if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV) {
- phy_err(phy, "power on failed in subdev\n");
- return ret;
- }
-
- /*
- * CSI-2 PHY Link Initialization Sequence, according to the DRA74xP /
- * DRA75xP / DRA76xP / DRA77xP TRM. The DRA71x / DRA72x and the AM65x /
- * DRA80xM TRMs have a a slightly simplified sequence.
- */
-
- /*
- * 1. Configure all CSI-2 low level protocol registers to be ready to
- * receive signals/data from the CSI-2 PHY.
- *
- * i.-v. Configure the lanes position and polarity.
- */
- cal_camerarx_lane_config(phy);
-
- /*
- * vi.-vii. Configure D-PHY mode, enable the required lanes and
- * enable the CAMERARX clock.
- */
- cal_camerarx_enable(phy);
-
- /*
- * 2. CSI PHY and link initialization sequence.
- *
- * a. Deassert the CSI-2 PHY reset. Do not wait for reset completion
- * at this point, as it requires the external sensor to send the
- * CSI-2 HS clock.
- */
- cal_write_field(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance),
- CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_OPERATIONAL,
- CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_MASK);
- phy_dbg(3, phy, "CAL_CSI2_COMPLEXIO_CFG(%d) = 0x%08x De-assert Complex IO Reset\n",
- phy->instance,
- cal_read(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance)));
-
- /* Dummy read to allow SCP reset to complete. */
- camerarx_read(phy, CAL_CSI2_PHY_REG0);
-
- /* Program the PHY timing parameters. */
- cal_camerarx_config(phy, external_rate, fmt);
-
- /*
- * b. Assert the FORCERXMODE signal.
- *
- * The stop-state-counter is based on fclk cycles, and we always use
- * the x16 and x4 settings, so stop-state-timeout =
- * fclk-cycle * 16 * 4 * counter.
- *
- * Stop-state-timeout must be more than 100us as per CSI-2 spec, so we
- * calculate a timeout that's 100us (rounding up).
- */
- sscounter = DIV_ROUND_UP(clk_get_rate(phy->cal->fclk), 10000 * 16 * 4);
-
- val = cal_read(phy->cal, CAL_CSI2_TIMING(phy->instance));
- cal_set_field(&val, 1, CAL_CSI2_TIMING_STOP_STATE_X16_IO1_MASK);
- cal_set_field(&val, 1, CAL_CSI2_TIMING_STOP_STATE_X4_IO1_MASK);
- cal_set_field(&val, sscounter,
- CAL_CSI2_TIMING_STOP_STATE_COUNTER_IO1_MASK);
- cal_write(phy->cal, CAL_CSI2_TIMING(phy->instance), val);
- phy_dbg(3, phy, "CAL_CSI2_TIMING(%d) = 0x%08x Stop States\n",
- phy->instance,
- cal_read(phy->cal, CAL_CSI2_TIMING(phy->instance)));
-
- /* Assert the FORCERXMODE signal. */
- cal_write_field(phy->cal, CAL_CSI2_TIMING(phy->instance),
- 1, CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_MASK);
- phy_dbg(3, phy, "CAL_CSI2_TIMING(%d) = 0x%08x Force RXMODE\n",
- phy->instance,
- cal_read(phy->cal, CAL_CSI2_TIMING(phy->instance)));
-
- /*
- * c. Connect pull-down on CSI-2 PHY link (using pad control).
- *
- * This is not required on DRA71x, DRA72x, AM65x and DRA80xM. Not
- * implemented.
- */
-
- /*
- * d. Power up the CSI-2 PHY.
- * e. Check whether the state status reaches the ON state.
- */
- cal_camerarx_power(phy, true);
-
- /*
- * Start the sensor to enable the CSI-2 HS clock. We can now wait for
- * CSI-2 PHY reset to complete.
- */
- ret = v4l2_subdev_call(phy->sensor, video, s_stream, 1);
- if (ret) {
- v4l2_subdev_call(phy->sensor, core, s_power, 0);
- phy_err(phy, "stream on failed in subdev\n");
- return ret;
- }
-
- cal_camerarx_wait_reset(phy);
-
- /* f. Wait for STOPSTATE=1 for all enabled lane modules. */
- cal_camerarx_wait_stop_state(phy);
-
- phy_dbg(1, phy, "CSI2_%u_REG1 = 0x%08x (bits 31-28 should be set)\n",
- phy->instance, camerarx_read(phy, CAL_CSI2_PHY_REG1));
-
- /*
- * g. Disable pull-down on CSI-2 PHY link (using pad control).
- *
- * This is not required on DRA71x, DRA72x, AM65x and DRA80xM. Not
- * implemented.
- */
-
- return 0;
-}
-
-void cal_camerarx_stop(struct cal_camerarx *phy)
-{
- unsigned int i;
- int ret;
-
- cal_camerarx_power(phy, false);
-
- /* Assert Complex IO Reset */
- cal_write_field(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance),
- CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL,
- CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_MASK);
-
- /* Wait for power down completion */
- for (i = 0; i < 10; i++) {
- if (cal_read_field(phy->cal,
- CAL_CSI2_COMPLEXIO_CFG(phy->instance),
- CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_MASK) ==
- CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_RESETONGOING)
- break;
- usleep_range(1000, 1100);
- }
- phy_dbg(3, phy, "CAL_CSI2_COMPLEXIO_CFG(%d) = 0x%08x Complex IO in Reset (%d) %s\n",
- phy->instance,
- cal_read(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance)), i,
- (i >= 10) ? "(timeout)" : "");
-
- /* Disable the phy */
- cal_camerarx_disable(phy);
-
- if (v4l2_subdev_call(phy->sensor, video, s_stream, 0))
- phy_err(phy, "stream off failed in subdev\n");
-
- ret = v4l2_subdev_call(phy->sensor, core, s_power, 0);
- if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV)
- phy_err(phy, "power off failed in subdev\n");
-}
-
-/*
- * Errata i913: CSI2 LDO Needs to be disabled when module is powered on
- *
- * Enabling CSI2 LDO shorts it to core supply. It is crucial the 2 CSI2
- * LDOs on the device are disabled if CSI-2 module is powered on
- * (0x4845 B304 | 0x4845 B384 [28:27] = 0x1) or in ULPS (0x4845 B304
- * | 0x4845 B384 [28:27] = 0x2) mode. Common concerns include: high
- * current draw on the module supply in active mode.
- *
- * Errata does not apply when CSI-2 module is powered off
- * (0x4845 B304 | 0x4845 B384 [28:27] = 0x0).
- *
- * SW Workaround:
- * Set the following register bits to disable the LDO,
- * which is essentially CSI2 REG10 bit 6:
- *
- * Core 0: 0x4845 B828 = 0x0000 0040
- * Core 1: 0x4845 B928 = 0x0000 0040
- */
-static void cal_camerarx_i913_errata(struct cal_camerarx *phy)
-{
- u32 reg10 = camerarx_read(phy, CAL_CSI2_PHY_REG10);
-
- cal_set_field(®10, 1, CAL_CSI2_PHY_REG10_I933_LDO_DISABLE_MASK);
-
- phy_dbg(1, phy, "CSI2_%d_REG10 = 0x%08x\n", phy->instance, reg10);
- camerarx_write(phy, CAL_CSI2_PHY_REG10, reg10);
-}
-
-/*
- * Enable the expected IRQ sources
- */
-void cal_camerarx_enable_irqs(struct cal_camerarx *phy)
-{
- u32 val;
-
- const u32 cio_err_mask =
- CAL_CSI2_COMPLEXIO_IRQ_LANE_ERRORS_MASK |
- CAL_CSI2_COMPLEXIO_IRQ_FIFO_OVR_MASK |
- CAL_CSI2_COMPLEXIO_IRQ_SHORT_PACKET_MASK |
- CAL_CSI2_COMPLEXIO_IRQ_ECC_NO_CORRECTION_MASK;
-
- /* Enable CIO error irqs */
- cal_write(phy->cal, CAL_HL_IRQENABLE_SET(0),
- CAL_HL_IRQ_CIO_MASK(phy->instance));
- cal_write(phy->cal, CAL_CSI2_COMPLEXIO_IRQENABLE(phy->instance),
- cio_err_mask);
-
- /* Always enable OCPO error */
- cal_write(phy->cal, CAL_HL_IRQENABLE_SET(0), CAL_HL_IRQ_OCPO_ERR_MASK);
-
- /* Enable IRQ_WDMA_END 0/1 */
- val = 0;
- cal_set_field(&val, 1, CAL_HL_IRQ_MASK(phy->instance));
- cal_write(phy->cal, CAL_HL_IRQENABLE_SET(1), val);
- /* Enable IRQ_WDMA_START 0/1 */
- val = 0;
- cal_set_field(&val, 1, CAL_HL_IRQ_MASK(phy->instance));
- cal_write(phy->cal, CAL_HL_IRQENABLE_SET(2), val);
- /* Todo: Add VC_IRQ and CSI2_COMPLEXIO_IRQ handling */
- cal_write(phy->cal, CAL_CSI2_VC_IRQENABLE(0), 0xFF000000);
-}
-
-void cal_camerarx_disable_irqs(struct cal_camerarx *phy)
-{
- u32 val;
-
- /* Disable CIO error irqs */
- cal_write(phy->cal, CAL_HL_IRQENABLE_CLR(0),
- CAL_HL_IRQ_CIO_MASK(phy->instance));
- cal_write(phy->cal, CAL_CSI2_COMPLEXIO_IRQENABLE(phy->instance),
- 0);
-
- /* Disable IRQ_WDMA_END 0/1 */
- val = 0;
- cal_set_field(&val, 1, CAL_HL_IRQ_MASK(phy->instance));
- cal_write(phy->cal, CAL_HL_IRQENABLE_CLR(1), val);
- /* Disable IRQ_WDMA_START 0/1 */
- val = 0;
- cal_set_field(&val, 1, CAL_HL_IRQ_MASK(phy->instance));
- cal_write(phy->cal, CAL_HL_IRQENABLE_CLR(2), val);
- /* Todo: Add VC_IRQ and CSI2_COMPLEXIO_IRQ handling */
- cal_write(phy->cal, CAL_CSI2_VC_IRQENABLE(0), 0);
-}
-
-void cal_camerarx_ppi_enable(struct cal_camerarx *phy)
-{
- cal_write(phy->cal, CAL_CSI2_PPI_CTRL(phy->instance), BIT(3));
- cal_write_field(phy->cal, CAL_CSI2_PPI_CTRL(phy->instance),
- 1, CAL_CSI2_PPI_CTRL_IF_EN_MASK);
-}
-
-void cal_camerarx_ppi_disable(struct cal_camerarx *phy)
-{
- cal_write_field(phy->cal, CAL_CSI2_PPI_CTRL(phy->instance),
- 0, CAL_CSI2_PPI_CTRL_IF_EN_MASK);
-}
-
-static int cal_camerarx_regmap_init(struct cal_dev *cal,
- struct cal_camerarx *phy)
-{
- const struct cal_camerarx_data *phy_data;
- unsigned int i;
-
- if (!cal->data)
- return -EINVAL;
-
- phy_data = &cal->data->camerarx[phy->instance];
-
- for (i = 0; i < F_MAX_FIELDS; i++) {
- struct reg_field field = {
- .reg = cal->syscon_camerrx_offset,
- .lsb = phy_data->fields[i].lsb,
- .msb = phy_data->fields[i].msb,
- };
-
- /*
- * Here we update the reg offset with the
- * value found in DT
- */
- phy->fields[i] = devm_regmap_field_alloc(cal->dev,
- cal->syscon_camerrx,
- field);
- if (IS_ERR(phy->fields[i])) {
- cal_err(cal, "Unable to allocate regmap fields\n");
- return PTR_ERR(phy->fields[i]);
- }
- }
-
- return 0;
-}
-
-static int cal_camerarx_parse_dt(struct cal_camerarx *phy)
-{
- struct v4l2_fwnode_endpoint *endpoint = &phy->endpoint;
- struct device_node *ep_node;
- char data_lanes[V4L2_FWNODE_CSI2_MAX_DATA_LANES * 2];
- unsigned int i;
- int ret;
-
- /*
- * Find the endpoint node for the port corresponding to the PHY
- * instance, and parse its CSI-2-related properties.
- */
- ep_node = of_graph_get_endpoint_by_regs(phy->cal->dev->of_node,
- phy->instance, 0);
- if (!ep_node) {
- phy_dbg(3, phy, "Can't get endpoint\n");
- return -EINVAL;
- }
-
- endpoint->bus_type = V4L2_MBUS_CSI2_DPHY;
- ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep_node), endpoint);
- if (ret < 0) {
- phy_err(phy, "Failed to parse endpoint\n");
- goto done;
- }
-
- for (i = 0; i < endpoint->bus.mipi_csi2.num_data_lanes; i++) {
- unsigned int lane = endpoint->bus.mipi_csi2.data_lanes[i];
-
- if (lane > 4) {
- phy_err(phy, "Invalid position %u for data lane %u\n",
- lane, i);
- ret = -EINVAL;
- goto done;
- }
-
- data_lanes[i*2] = '0' + lane;
- data_lanes[i*2+1] = ' ';
- }
-
- data_lanes[i*2-1] = '\0';
-
- phy_dbg(3, phy,
- "CSI-2 bus: clock lane <%u>, data lanes <%s>, flags 0x%08x\n",
- endpoint->bus.mipi_csi2.clock_lane, data_lanes,
- endpoint->bus.mipi_csi2.flags);
-
- /* Retrieve the connected device and store it for later use. */
- phy->sensor_node = of_graph_get_remote_port_parent(ep_node);
- if (!phy->sensor_node) {
- phy_dbg(3, phy, "Can't get remote parent\n");
- goto done;
- }
-
- phy_dbg(1, phy, "Found connected device %pOFn\n", phy->sensor_node);
-
-done:
- of_node_put(ep_node);
- return ret;
-}
-
-static struct cal_camerarx *cal_camerarx_create(struct cal_dev *cal,
- unsigned int instance)
-{
- struct platform_device *pdev = to_platform_device(cal->dev);
- struct cal_camerarx *phy;
- int ret;
-
- phy = kzalloc(sizeof(*phy), GFP_KERNEL);
- if (!phy)
- return ERR_PTR(-ENOMEM);
-
- phy->cal = cal;
- phy->instance = instance;
-
- phy->res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
- (instance == 0) ?
- "cal_rx_core0" :
- "cal_rx_core1");
- phy->base = devm_ioremap_resource(cal->dev, phy->res);
- if (IS_ERR(phy->base)) {
- cal_err(cal, "failed to ioremap\n");
- ret = PTR_ERR(phy->base);
- goto error;
- }
-
- cal_dbg(1, cal, "ioresource %s at %pa - %pa\n",
- phy->res->name, &phy->res->start, &phy->res->end);
-
- ret = cal_camerarx_regmap_init(cal, phy);
- if (ret)
- goto error;
-
- ret = cal_camerarx_parse_dt(phy);
- if (ret)
- goto error;
-
- return phy;
-
-error:
- kfree(phy);
- return ERR_PTR(ret);
-}
-
-static void cal_camerarx_destroy(struct cal_camerarx *phy)
-{
- if (!phy)
- return;
-
- of_node_put(phy->sensor_node);
- kfree(phy);
-}
-
-static int cal_camerarx_init_regmap(struct cal_dev *cal)
-{
- struct platform_device *pdev = to_platform_device(cal->dev);
- struct device_node *np = cal->dev->of_node;
- struct regmap_config config = { };
- struct regmap *syscon;
- struct resource *res;
- unsigned int offset;
- void __iomem *base;
-
- syscon = syscon_regmap_lookup_by_phandle_args(np, "ti,camerrx-control",
- 1, &offset);
- if (!IS_ERR(syscon)) {
- cal->syscon_camerrx = syscon;
- cal->syscon_camerrx_offset = offset;
- return 0;
- }
-
- dev_warn(cal->dev, "failed to get ti,camerrx-control: %ld\n",
- PTR_ERR(syscon));
-
- /*
- * Backward DTS compatibility. If syscon entry is not present then
- * check if the camerrx_control resource is present.
- */
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
- "camerrx_control");
- base = devm_ioremap_resource(cal->dev, res);
- if (IS_ERR(base)) {
- cal_err(cal, "failed to ioremap camerrx_control\n");
- return PTR_ERR(base);
- }
-
- cal_dbg(1, cal, "ioresource %s at %pa - %pa\n",
- res->name, &res->start, &res->end);
-
- config.reg_bits = 32;
- config.reg_stride = 4;
- config.val_bits = 32;
- config.max_register = resource_size(res) - 4;
-
- syscon = regmap_init_mmio(NULL, base, &config);
- if (IS_ERR(syscon)) {
- pr_err("regmap init failed\n");
- return PTR_ERR(syscon);
- }
-
- /*
- * In this case the base already point to the direct CM register so no
- * need for an offset.
- */
- cal->syscon_camerrx = syscon;
- cal->syscon_camerrx_offset = 0;
-
- return 0;
-}
-
/* ------------------------------------------------------------------
* Context Management
* ------------------------------------------------------------------
@@ -1350,6 +682,63 @@ static u32 cal_data_get_num_csi2_phy(struct cal_dev *cal)
return cal->data->num_csi2_phy;
}
+static int cal_init_camerarx_regmap(struct cal_dev *cal)
+{
+ struct platform_device *pdev = to_platform_device(cal->dev);
+ struct device_node *np = cal->dev->of_node;
+ struct regmap_config config = { };
+ struct regmap *syscon;
+ struct resource *res;
+ unsigned int offset;
+ void __iomem *base;
+
+ syscon = syscon_regmap_lookup_by_phandle_args(np, "ti,camerrx-control",
+ 1, &offset);
+ if (!IS_ERR(syscon)) {
+ cal->syscon_camerrx = syscon;
+ cal->syscon_camerrx_offset = offset;
+ return 0;
+ }
+
+ dev_warn(cal->dev, "failed to get ti,camerrx-control: %ld\n",
+ PTR_ERR(syscon));
+
+ /*
+ * Backward DTS compatibility. If syscon entry is not present then
+ * check if the camerrx_control resource is present.
+ */
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "camerrx_control");
+ base = devm_ioremap_resource(cal->dev, res);
+ if (IS_ERR(base)) {
+ cal_err(cal, "failed to ioremap camerrx_control\n");
+ return PTR_ERR(base);
+ }
+
+ cal_dbg(1, cal, "ioresource %s at %pa - %pa\n",
+ res->name, &res->start, &res->end);
+
+ config.reg_bits = 32;
+ config.reg_stride = 4;
+ config.val_bits = 32;
+ config.max_register = resource_size(res) - 4;
+
+ syscon = regmap_init_mmio(NULL, base, &config);
+ if (IS_ERR(syscon)) {
+ pr_err("regmap init failed\n");
+ return PTR_ERR(syscon);
+ }
+
+ /*
+ * In this case the base already point to the direct CM register so no
+ * need for an offset.
+ */
+ cal->syscon_camerrx = syscon;
+ cal->syscon_camerrx_offset = 0;
+
+ return 0;
+}
+
static int cal_probe(struct platform_device *pdev)
{
struct cal_dev *cal;
@@ -1378,7 +767,7 @@ static int cal_probe(struct platform_device *pdev)
return PTR_ERR(cal->fclk);
}
- ret = cal_camerarx_init_regmap(cal);
+ ret = cal_init_camerarx_regmap(cal);
if (ret < 0)
return ret;
diff --git a/drivers/media/platform/ti-vpe/cal.h b/drivers/media/platform/ti-vpe/cal.h
index 523049f3f9dc..cb167bfc2773 100644
--- a/drivers/media/platform/ti-vpe/cal.h
+++ b/drivers/media/platform/ti-vpe/cal.h
@@ -241,12 +241,17 @@ static inline void cal_set_field(u32 *valp, u32 field, u32 mask)
void cal_quickdump_regs(struct cal_dev *cal);
+void cal_camerarx_disable(struct cal_camerarx *phy);
int cal_camerarx_start(struct cal_camerarx *phy, const struct cal_fmt *fmt);
void cal_camerarx_stop(struct cal_camerarx *phy);
void cal_camerarx_enable_irqs(struct cal_camerarx *phy);
void cal_camerarx_disable_irqs(struct cal_camerarx *phy);
void cal_camerarx_ppi_enable(struct cal_camerarx *phy);
void cal_camerarx_ppi_disable(struct cal_camerarx *phy);
+void cal_camerarx_i913_errata(struct cal_camerarx *phy);
+struct cal_camerarx *cal_camerarx_create(struct cal_dev *cal,
+ unsigned int instance);
+void cal_camerarx_destroy(struct cal_camerarx *phy);
void cal_ctx_csi2_config(struct cal_ctx *ctx);
void cal_ctx_pix_proc_config(struct cal_ctx *ctx);
--
Regards,
Laurent Pinchart
