The cal_probe() function is a bit long, add comments to delimitate
sections in order to improve readability. The platform_set_drvdata()
call is moved to a more logical place as a result.
Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
drivers/media/platform/ti-vpe/cal.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/media/platform/ti-vpe/cal.c b/drivers/media/platform/ti-vpe/cal.c
index c83bf261da91..9b116ffd6e41 100644
--- a/drivers/media/platform/ti-vpe/cal.c
+++ b/drivers/media/platform/ti-vpe/cal.c
@@ -2308,9 +2308,10 @@ static int cal_probe(struct platform_device *pdev)
return -ENODEV;
}
- /* save pdev pointer */
cal->pdev = pdev;
+ platform_set_drvdata(pdev, cal);
+ /* Acquire resources: clocks, CAMERARX regmap, I/O memory and IRQ. */
cal->fclk = devm_clk_get(&pdev->dev, "fck");
if (IS_ERR(cal->fclk)) {
dev_err(&pdev->dev, "cannot get CAL fclk\n");
@@ -2337,14 +2338,14 @@ static int cal_probe(struct platform_device *pdev)
if (ret)
return ret;
- platform_set_drvdata(pdev, cal);
-
+ /* Create CAMERARX PHYs. */
for (i = 0; i < cal_data_get_num_csi2_phy(cal); ++i) {
cal->phy[i] = cal_camerarx_create(cal, i);
if (IS_ERR(cal->phy[i]))
return PTR_ERR(cal->phy[i]);
}
+ /* Create contexts. */
for (i = 0; i < cal_data_get_num_csi2_phy(cal); ++i)
cal->ctx[i] = cal_create_instance(cal, i);
@@ -2355,15 +2356,13 @@ static int cal_probe(struct platform_device *pdev)
vb2_dma_contig_set_max_seg_size(&pdev->dev, DMA_BIT_MASK(32));
+ /* Read the revision and hardware info to verify hardware access. */
pm_runtime_enable(&pdev->dev);
-
ret = pm_runtime_get_sync(&pdev->dev);
if (ret)
goto runtime_disable;
- /* Just check we can actually access the module */
cal_get_hwinfo(cal);
-
pm_runtime_put_sync(&pdev->dev);
return 0;
--
Regards,
Laurent Pinchart
