Hi, I have 2 differents dongle but the same errors appairs because there's the same tuner system. I'll use this dongles for dvb-t reception. The driver i'm using is the mercurial revision "82c3b0033929 tip" Maybe I forget something, please anyone should help me. When I'll try to see a dvb-t channel with the card 1 (PCTV 330e) i'll get this error. ========================================================== [12687.577100] xc2028 1-0061: error: bandwidth not supported. [12687.636069] xc2028 1-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. [12688.768071] xc2028 1-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. With the card 2 (USB 2881 Video) I've the same errors ======================================= [12888.431519] xc2028 1-0061: error: bandwidth not supported. [12888.488512] xc2028 1-0061: Loading firmware for type=BASE (1), id 0000000000000000. [12889.589077] xc2028 1-0061: Loading firmware for type=BASE (1), id 0000000000000000. Card 1 dmesg ========== [12308.004121] usb 1-1: new high speed USB device using ehci_hcd and address 11 [12308.145714] usb 1-1: New USB device found, idVendor=2304, idProduct=0226 [12308.145725] usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [12308.145733] usb 1-1: Product: PCTV 330e [12308.145739] usb 1-1: Manufacturer: Pinnacle Systems [12308.145744] usb 1-1: SerialNumber: 061101027954 [12308.145960] usb 1-1: configuration #1 chosen from 1 choice [12308.147777] em28xx: New device Pinnacle Systems PCTV 330e @ 480 Mbps (2304:0226, interface 0, class 0) [12308.148053] em28xx #0: chip ID is em2882/em2883 [12308.324566] em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 26 02 d0 12 5c 03 8e 16 a4 1c [12308.324589] em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 00 00 00 00 00 00 [12308.324610] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00 [12308.324629] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00 [12308.324647] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [12308.324665] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [12308.324683] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 24 03 50 00 69 00 [12308.324701] em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00 [12308.324719] em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 00 00 16 03 [12308.324737] em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00 33 00 33 00 30 00 [12308.324755] em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 36 00 31 00 31 00 30 00 [12308.324773] em28xx #0: i2c eeprom b0: 31 00 30 00 32 00 37 00 39 00 35 00 34 00 00 00 [12308.324791] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [12308.324809] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [12308.324827] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [12308.324845] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [12308.324867] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xb0b3aebf [12308.324873] em28xx #0: EEPROM info: [12308.324877] em28xx #0: AC97 audio (5 sample rates) [12308.324882] em28xx #0: 500mA max power [12308.324888] em28xx #0: Table at 0x27, strings=0x168e, 0x1ca4, 0x246a [12308.326783] em28xx #0: Identified as Pinnacle Hybrid Pro (330e) (card=56) [12308.330650] tvp5150 1-005c: chip found @ 0xb8 (em28xx #0) [12308.336375] tuner 1-0061: chip found @ 0xc2 (em28xx #0) [12308.336536] xc2028 1-0061: creating new instance [12308.336543] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner [12308.336558] usb 1-1: firmware: requesting xc3028-v27.fw [12308.346584] xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [12308.392088] xc2028 1-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. [12309.399125] xc2028 1-0061: Loading firmware for type=MTS (4), id 000000000000b700. [12309.415115] xc2028 1-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700. [12309.540632] input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:12.2/usb1/1-1/input/input22 [12309.540781] Creating IR device irrcv0 [12309.541715] em28xx #0: Config register raw data: 0xd0 [12309.542565] em28xx #0: AC97 vendor ID = 0xffffffff [12309.542933] em28xx #0: AC97 features = 0x6a90 [12309.542941] em28xx #0: Empia 202 AC97 audio processor detected [12309.673039] tvp5150 1-005c: tvp5150am1 detected. [12309.777174] em28xx #0: v4l2 driver version 0.1.2 [12309.863427] em28xx #0: V4L2 video device registered as video1 [12309.863432] em28xx #0: V4L2 VBI device registered as vbi0 [12309.863435] em28xx-audio.c: probing for em28x1 non standard usbaudio [12309.863438] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [12309.915259] xc2028 1-0061: attaching existing instance [12309.915264] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner [12309.915267] em28xx #0: em28xx #0/2: xc3028 attached [12309.915270] DVB: registering new adapter (em28xx #0) [12309.915275] DVB: registering adapter 0 frontend 0 (Micronas DRXD DVB-T)... [12309.915651] em28xx #0: Successfully loaded em28xx-dvb [12310.056713] tvp5150 1-005c: tvp5150am1 detected. [12310.301034] tvp5150 1-005c: tvp5150am1 detected. Card 2 dmesg ========== [12194.852107] usb 1-1: new high speed USB device using ehci_hcd and address 10 [12194.988014] usb 1-1: New USB device found, idVendor=eb1a, idProduct=2881 [12194.988025] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [12194.988033] usb 1-1: Product: USB 2881 Video [12194.988242] usb 1-1: configuration #1 chosen from 1 choice [12194.990396] em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0) [12194.991134] em28xx #0: chip ID is em2882/em2883 [12195.072989] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00 [12195.073002] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00 [12195.073014] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00 [12195.073025] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00 [12195.073035] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [12195.073045] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [12195.073056] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00 [12195.073066] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00 [12195.073076] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00 [12195.073086] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [12195.073097] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [12195.073107] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [12195.073117] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [12195.073127] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [12195.073137] em28xx #0: i2c eeprom e0: 5a 00 55 aa 79 55 54 03 00 17 98 01 00 00 00 00 [12195.073148] em28xx #0: i2c eeprom f0: 0c 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 [12195.073160] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xb8846b20 [12195.073164] em28xx #0: EEPROM info: [12195.073166] em28xx #0: AC97 audio (5 sample rates) [12195.073169] em28xx #0: USB Remote wakeup capable [12195.073171] em28xx #0: 500mA max power [12195.073175] em28xx #0: Table at 0x04, strings=0x206a, 0x006a, 0x0000 [12195.074987] em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1) [12195.074993] em28xx #0: Your board has no unique USB ID. [12195.074998] em28xx #0: A hint were successfully done, based on eeprom hash. [12195.075001] em28xx #0: This method is not 100% failproof. [12195.075005] em28xx #0: If the board were missdetected, please email this log to: [12195.075008] em28xx #0: V4L Mailing List <linux-media@xxxxxxxxxxxxxxx> [12195.075012] em28xx #0: Board detected as Pinnacle Hybrid Pro [12195.153274] tvp5150 1-005c: chip found @ 0xb8 (em28xx #0) [12195.158756] tuner 1-0061: chip found @ 0xc2 (em28xx #0) [12195.158914] xc2028 1-0061: creating new instance [12195.158922] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner [12195.158936] usb 1-1: firmware: requesting xc3028-v27.fw [12195.167042] xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [12195.224041] xc2028 1-0061: Loading firmware for type=BASE (1), id 0000000000000000. [12196.237538] xc2028 1-0061: Loading firmware for type=(0), id 000000000000b700. [12196.253132] SCODE (20000000), id 000000000000b700: [12196.253147] xc2028 1-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000. [12196.376244] em28xx #0: Config register raw data: 0x58 [12196.376986] em28xx #0: AC97 vendor ID = 0x83847652 [12196.377459] em28xx #0: AC97 features = 0x6a90 [12196.377467] em28xx #0: Sigmatel audio processor detected(stac 9752) [12196.504782] tvp5150 1-005c: tvp5150am1 detected. [12196.617467] em28xx #0: v4l2 driver version 0.1.2 [12196.699890] em28xx #0: V4L2 video device registered as video1 [12196.699899] em28xx #0: V4L2 VBI device registered as vbi0 [12196.842672] xc2028 1-0061: attaching existing instance [12196.842682] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner [12196.842689] em28xx #0: em28xx #0/2: xc3028 attached [12196.842696] DVB: registering new adapter (em28xx #0) [12196.842705] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)... [12196.843419] em28xx #0: Successfully loaded em28xx-dvb [12196.844421] em28xx audio device (eb1a:2881): interface 1, class 1 [12196.970244] tvp5150 1-005c: tvp5150am1 detected. Sincerely. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
