Re: [RFC] METADATA design using V4l2 Request API

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Le vendredi 05 juin 2020 à 12:32 +0530, dikshita@xxxxxxxxxxxxxx a écrit :
> Hi Hans, Nicolas,
> 
> On 2020-05-29 13:01, Hans Verkuil wrote:
> > On 29/05/2020 04:18, Nicolas Dufresne wrote:
> > > Le jeudi 28 mai 2020 à 16:18 +0530, dikshita@xxxxxxxxxxxxxx a écrit :
> > > > > not allowed. So I need to know more about this.
> > > > > Regards,
> > > > >        Hans
> > > > 
> > > > we need this for use cases like HDR10+ where metadata info is part of
> > > > the bitstream.
> > > > 
> > > > To handle such frame specific data, support for request api on 
> > > > capture
> > > > plane would be needed.
> > > 
> > > I have a bit of a mixed impression here. Considering how large the 
> > > ioctl
> > > interface overhead is, relying on HW parser to extract this medata 
> > > woud be the
> > > last thing I would consider.
> > > 
> > > Instead, I'm quite convince we can achieve greater and likely 
> > > zero-copy
> > > perfromance by locating this header in userspace. So everytime I see 
> > > this kind
> > > of API, were the HW is *needed* to parse a trivial bit of bistream, I 
> > > ended
> > > thinking that we simply craft this API to expose this because the HW 
> > > can do it,
> > > but no further logical thinking or higher level design seems to have 
> > > been
> > > applied.
> > > 
> > > I'm sorry for this open critic, but are we designing this because the 
> > > HW
> > > designer exposed that feature? This is so low complexity to extract in
> > > userspace, with the bonus that we are not forced into expanding the
> > > representation to another form immediatly, as maybe the display will 
> > > be able to
> > > handle that form directly (where converting to a C structure and then 
> > > back to
> > > some binary format to satisfy DRM property seems very sub-optimal).
> > > 
> > > Nicolas
> > > 
> > 
> > Nicolas raises good questions: it would help if you can give more
> > detailed information
> > about the hardware. We had similar discussions with Xilinx about
> > HDR10+ (see this
> > thread: https://www.spinics.net/lists/linux-media/msg163297.html).
> > 
> > There is no clear answer at the moment on how to handle dynamic HDR 
> > metadata.
> > It will help if we have some more information how different SoCs handle 
> > this
> > in hardware.
> > 
> > Regards,
> > 
> > 	Hans
> 
> As per Widevine Level 1 requirement, it needs “Hardware Protected Video 
> Path”.
> Hence, in case of secure bitstream decoding, we need decoder metadata 
> delivered from HW.
> CPU cannot parse secure bitstream and extract them.
> Apart from this, there are other metadata like "histogram" which is not 
> part of the bitstream
> and generated by hardware

(I'm ignoring the bit about camera data + histogram, this was about
CODEC, and it also does not make much sense to me)

We extract this data from the bitstream, before the decoder. The
bitstream is not subject to secure buffer, because it's encrypted. Be
aware that the implementation does not encrypt all NALs, PPS/SPS SEIs,
are in clear, and NAL headers are most of the time in clear.

Going with full bitstream encryption would have required rewriting a
lot more HW, since you would not be able to handle the
depayload/demuxing in userspace or you'd need all this multimedia stuff
to be placed on in your secure firmware. Multimedia software these
days, ffmpeg, gstreamer, chromium internal stack etc. needs a lot of
information from the bitstream that would be very hard to pass
properly.

regards,
Nicolas




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux