On Thu, May 21, 2020 at 08:59:56PM +0200, Tomasz Figa wrote:
> Hi Dongchun, Rob,
>
> On Tue, May 12, 2020 at 4:41 AM Dongchun Zhu <dongchun.zhu@xxxxxxxxxxxx> wrote:
> >
> > Hi Rob,
> >
> > Thanks for the review.
> >
> > On Mon, 2020-05-11 at 11:02 -0500, Rob Herring wrote:
> > > On Sat, May 09, 2020 at 04:06:26PM +0800, Dongchun Zhu wrote:
> [snip]
> > > > + port {
> > > > + wcam_out: endpoint {
> > > > + remote-endpoint = <&mipi_in_wcam>;
> > > > + data-lanes = <1>;
> > >
> > > This doesn't match the schema which says this should be 4 entries.
> > >
> >
> > Property "data-lanes" shows the number of lanes that sensor supports.
> > If this property is omitted, four-lane operation is assumed.
> > For OV02A10, it is one-lane operation, so the property is supposed to be
> > set to <1>.
> >
>
> To clarify on this, the ov02a10 sensor supports only 1 lane. It's not
> a driver limitation.
If there's nothing to configure there, then the property should be omitted.
I understood the sensor supported one to four lanes...
--
Sakari Ailus
