Hi Jacopo,
The $SUBJECT here references {g,s}_mbus instead of {get,set}_mbus... and
might also need updating.
--
Kieran
On 14/05/2020 17:45, Jacopo Mondi wrote:
> Use the new get_mbus_config and set_mbus_config pad operation in place
> of the video operations currently in use.
>
> Compared to other drivers where the same conversion has been performed,
> ov6650 proves to be a bit more tricky, as the existing g_mbus_config
> implementation did not report the currently applied configuration but
> the set of all possible configuration options.
>
> Adapt the driver to support the semantic of the two newly introduced
> operations:
> - get_mbus_config reports the current media bus configuration
> - set_mbus_config applies only changes explicitly requested and updates
> the provided cfg parameter to report what has actually been applied to
> the hardware.
>
> Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> ---
> drivers/media/i2c/ov6650.c | 56 ++++++++++++++++++++++++++------------
> 1 file changed, 39 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/media/i2c/ov6650.c b/drivers/media/i2c/ov6650.c
> index 91906b94f978..efc798bac3a4 100644
> --- a/drivers/media/i2c/ov6650.c
> +++ b/drivers/media/i2c/ov6650.c
> @@ -921,46 +921,68 @@ static const struct v4l2_subdev_core_ops ov6650_core_ops = {
> };
>
> /* Request bus settings on camera side */
> -static int ov6650_g_mbus_config(struct v4l2_subdev *sd,
> - struct v4l2_mbus_config *cfg)
> +static int ov6650_get_mbus_config(struct v4l2_subdev *sd,
> + unsigned int pad,
> + struct v4l2_mbus_config *cfg)
> {
> + struct i2c_client *client = v4l2_get_subdevdata(sd);
> + u8 comj, comf;
> + int ret;
> +
> + ret = ov6650_reg_read(client, REG_COMJ, &comj);
> + if (ret)
> + return ret;
>
> - cfg->flags = V4L2_MBUS_MASTER |
> - V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING |
> - V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_LOW |
> - V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW |
> - V4L2_MBUS_DATA_ACTIVE_HIGH;
> + ret = ov6650_reg_read(client, REG_COMF, &comf);
> + if (ret)
> + return ret;
> +
> + cfg->flags = V4L2_MBUS_MASTER
> + | (comj & COMJ_VSYNC_HIGH ? V4L2_MBUS_VSYNC_ACTIVE_HIGH
> + : V4L2_MBUS_VSYNC_ACTIVE_LOW)
> + | (comf & COMF_HREF_LOW ? V4L2_MBUS_HSYNC_ACTIVE_LOW
> + : V4L2_MBUS_HSYNC_ACTIVE_HIGH)
> + | (comj & COMJ_PCLK_RISING ? V4L2_MBUS_PCLK_SAMPLE_RISING
> + : V4L2_MBUS_PCLK_SAMPLE_FALLING);
> cfg->type = V4L2_MBUS_PARALLEL;
>
> return 0;
> }
>
> /* Alter bus settings on camera side */
> -static int ov6650_s_mbus_config(struct v4l2_subdev *sd,
> - const struct v4l2_mbus_config *cfg)
> +static int ov6650_set_mbus_config(struct v4l2_subdev *sd,
> + unsigned int pad,
> + struct v4l2_mbus_config *cfg)
> {
> struct i2c_client *client = v4l2_get_subdevdata(sd);
> - int ret;
> + int ret = 0;
>
> if (cfg->flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
> ret = ov6650_reg_rmw(client, REG_COMJ, COMJ_PCLK_RISING, 0);
> - else
> + else if (cfg->flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)
> ret = ov6650_reg_rmw(client, REG_COMJ, 0, COMJ_PCLK_RISING);
> if (ret)
> - return ret;
> + goto error;
>
> if (cfg->flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
> ret = ov6650_reg_rmw(client, REG_COMF, COMF_HREF_LOW, 0);
> - else
> + else if (cfg->flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
> ret = ov6650_reg_rmw(client, REG_COMF, 0, COMF_HREF_LOW);
> if (ret)
> - return ret;
> + goto error;
>
> if (cfg->flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
> ret = ov6650_reg_rmw(client, REG_COMJ, COMJ_VSYNC_HIGH, 0);
> - else
> + else if (cfg->flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
> ret = ov6650_reg_rmw(client, REG_COMJ, 0, COMJ_VSYNC_HIGH);
>
> +error:
> + /*
> + * Update the configuration to report what is actually applied to
> + * the hardware.
> + */
> + ov6650_get_mbus_config(sd, pad, cfg);
> +
> return ret;
> }
>
> @@ -968,8 +990,6 @@ static const struct v4l2_subdev_video_ops ov6650_video_ops = {
> .s_stream = ov6650_s_stream,
> .g_frame_interval = ov6650_g_frame_interval,
> .s_frame_interval = ov6650_s_frame_interval,
> - .g_mbus_config = ov6650_g_mbus_config,
> - .s_mbus_config = ov6650_s_mbus_config,
> };
>
> static const struct v4l2_subdev_pad_ops ov6650_pad_ops = {
> @@ -978,6 +998,8 @@ static const struct v4l2_subdev_pad_ops ov6650_pad_ops = {
> .set_selection = ov6650_set_selection,
> .get_fmt = ov6650_get_fmt,
> .set_fmt = ov6650_set_fmt,
> + .get_mbus_config = ov6650_get_mbus_config,
> + .set_mbus_config = ov6650_set_mbus_config,
> };
>
> static const struct v4l2_subdev_ops ov6650_subdev_ops = {
>
--
Regards
--
Kieran
