Hi, for information...i have the same dongle (LeadTek WinFast DTV Dongle Mini - Bus 001 Device 003: ID 0413:6a03 Leadtek Research, Inc. ) and after compiled RTL2832U + change VID+PID in rtl2832u.h (i changed USB_VID_GTEK + USB_PID_GTEK_WARM to leadtek`s 0413:6a03) is tuner working! (me-tv + kaffeine) [54444.033094] usb 1-2: new high speed USB device using ehci_hcd and address 3 [54444.174858] usb 1-2: configuration #1 chosen from 1 choice [54444.287045] dvb-usb: found a 'RT DTV 2832U' in warm state. [54444.287056] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [54444.288707] DVB: registering new adapter (RT DTV 2832U) [54444.289274] DVB: registering adapter 0 frontend 0 (Realtek RTL2832 DVB-T)... [54444.289324] dvb-usb: RT DTV 2832U successfully initialized and connected. [54444.289360] usbcore: registered new interface driver dvb_usb_rtl2832u compilation is the same as instruction for msi digivox mini II v3.0 --cut ---- Installation of Realtek rtl2832u-based DVB-T-USB-Sticks: sudo apt-get install unrar build-essential mercurial mkdir digivox; cd digivox hg clone http://linuxtv.org/hg/v4l-dvb <http://linuxtv.org/hg/v4l-dvb> wget http://media.ubuntuusers.de/forum/attachments/2103272/090730_RTL2832U_LINUX_Ver1.1.rar <http://media.ubuntuusers.de/forum/attachments/2103272/090730_RTL2832U_LINUX_Ver1.1.rar> unrar x -ep 090730_RTL2832U_LINUX_Ver1.1.rar ./v4l-dvb/linux/drivers/media/dvb/dvb-usb cd v4l-dvb for i in `find . -name *.pl`; do chmod +x $i ; done gedit ./linux/drivers/media/dvb/dvb-usb/Makefile (Insertion nearly to the end of file <https://bugs.launchpad.net/me-tv/+bug/478439/file>:) dvb-usb-rtl2832u-objs = demod_rtl2832.o dvbt_demod_base.o dvbt_nim_base.o foundation.o math_mpi.o nim_rtl2832_mxl5007t.o nim_rtl2832_fc2580.o nim_rtl2832_mt2266.o rtl2832u.o rtl2832u_fe.o rtl2832u_io.o tuner_mxl5007t.o tuner_fc2580.o tuner_mt2266.o tuner_tua9001.o nim_rtl2832_tua9001.o obj-$(CONFIG_DVB_USB_RTL2832U) += dvb-usb-rtl2832u.o gedit ./linux/drivers/media/dvb/dvb-usb/Kconfig (Insertion to the end of file <https://bugs.launchpad.net/me-tv/+bug/478439/file>:) config DVB_USB_RTL2832U tristate "Realtek RTL2832U DVB-T USB2.0 support" depends on DVB_USB help Realtek RTL2832U DVB-T driver gedit ./linux/drivers/media/dvb/dvb-usb/rtl2832u.c (1. Remove // of line 12:) //DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); (2. replace line 61-63 by:) if ( ( 0== dvb_usb_device_init(intf,&rtl2832u_1st_properties,THIS_MODULE,NULL,adapter_nr) )|| ( 0== dvb_usb_device_init(intf,&rtl2832u_2nd_properties,THIS_MODULE,NULL,adapter_nr) ) || ( 0== dvb_usb_device_init(intf,&rtl2832u_3th_properties,THIS_MODULE,NULL,adapter_nr) )) gedit ./linux/drivers/media/dvb/dvb-usb/tuner_tua9001.c (search for 19.2 AND 20.48 and replace it by 19_2 AND 20_48:) #elif defined(CRYSTAL_19.2_MHZ) /* Frequency 19.2 MHz */ #elif defined(CRYSTAL_19_2_MHZ) /* Frequency 19.2 MHz */ #elif defined(CRYSTAL_20.48_MHZ) /* Frequency 20,48 MHz */ #elif defined(CRYSTAL_20_48_MHZ) /* Frequency 20,48 MHz */ make STRG^C after some secs. gedit ./v4l/.config (replace FIREDTV=m by FIREDTV=n:) CONFIG_DVB_FIREDTV=m CONFIG_DVB_FIREDTV=n make clean make sudo make install --cut ---- Jan Hoogenraad napsal(a): > Mauro: > > Can you remove the VERY OLD branch: > http://linuxtv.org/hg/~mchehab/rtl2831/rev/d116540ebaab > It is giving some confusion here. > > Thomas & Jan: > > I've got the RTL2831 code (mind the last digit) vetted off by LeadTek. > For the rtl2832, I haven't had contact with them. > > Certainly, Jan could try any of the three archives. > I know Antti has thoughts on the rtl2832, I'm sure he knows more. > > thomas schorpp wrote: >> Jan Hoogenraad wrote: >>> Antti has been working on drivers for the RTL283x. >>> >>> http://linuxtv.org/hg/~anttip/rtl2831u >>> or >>> http://linuxtv.org/hg/~anttip/qt1010/ >> >> ~jhoogenraad/rtl2831-r2 rtl2831-r2 development repository: *known >> working version* Jan Hoogenraad >> >> Should Jan Slaninka try it? >>> >>> If you have more information on the RTL2832, I'd be happy to add it at: >>> http://www.linuxtv.org/wiki/index.php/Rtl2831_devices >> >> Nothing on the Realtek website yet. >> >>> >>> >>> Jan Slaninka wrote: >>>> Hi, >>>> >>>> I'd like to ask for a support with getting LeadTek WindFast DTV Dongle >>>> mini running on Linux. So far I was able to fetch latest v4l-dvb from >>>> HG, and successfully compiled module dvb_usb_rtl2832u found in >> >>>> 090730_RTL2832U_LINUX_Ver1.1.rar >> >> Can be considered as GPL code then according to >> >> http://linuxtv.org/hg/~mchehab/rtl2831/rev/d116540ebaab >> >> Patch to make RTL2831U DVB-T USB2.0 DEVICE work, based on RealTek >> version 080314 >> >> ~mchehab/rtl2831 rtl2831 development repository with *RealTek GPL >> code* for rtl2831 Mauro Carvalho Chehab 24 months ago >> >> ? >> >> y >> tom >> -- >> To unsubscribe from this list: send the line "unsubscribe >> linux-media" in >> the body of a message to majordomo@xxxxxxxxxxxxxxx >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> > > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
