Hi all,
On 5/15/20 10:32 AM, Mauro Carvalho Chehab wrote:
Em Mon, 4 May 2020 15:44:20 +0200
Patrik Gfeller <patrik.gfeller@xxxxxxxxx> escreveu:
Maybe this is related to my partial build (only the module to test if
it builds). I'll now do a full build of the kernel.
Yeah, either that or there are some config options with different values.
I was able to do a full build here without the above errors, although
I had to turn of some CONFIG options that were otherwise failing.
Strange - I do not get it :-/ ... can you send me the .config file and
Makefile you use; probably I missed something.
I posted an alternate version, with the driver from the Yocto Aero tree
ported to Kernel 5.7-rc2. The Kernel sources used are at this directory:
https://download.01.org/aero/deb/pool/main/l/linux-4.4.76-aero-1.3/
Such port is at the atomisp_yocto_v1:
https://git.linuxtv.org/mchehab/experimental.git/log/?h=atomisp_yocto_v1
The goal of this port is not for upstreaming it. Instead, it is meant
to be used just for testing, using a version that should work - at least
with the Intel Aero board with the Aero drone's camera (tests needed, as
I don't have myself such hardware). This version is ISP2401 only.
The firmware for it is at:
https://download.01.org/aero/deb/pool/main/f/firmware-atomisp/firmware-atomisp_0.1.orig.tar.xz
If the ISP revision is equal or bigger than rev 02, this file should be
renamed to:
shisp_2401b0_v21.bin
Before getting excited, this version didn't work so far on my hardware:
atomisp: Loaded firmware version 'irci_stable_candrpv_0415_20150521_0458'.
atomisp-isp2 0000:00:03.0: css load fw failed.
atomisp-isp2 0000:00:03.0: Failed to init css.
(I didn't try to check why it is failing yet - maybe it is just
some version port related issue)
If someone has access to the Intel Aero board, I'd appreciate if you
could test it and send the results. If it fails too, it would be
nice to have the dmesg output of this version and the dmesg from
a version which works.
Mauro, first of all thank you for working on this.
I wonder if you have tried to build and run the linux-4.4.76-aero-1.3
kernel on your T101HA ? It would be interesting to see if that one
does (not) have the "css load fw failed" errors and who knows you
might even be able to get that to actually show some sort of picture
from one of the 2 sensors on the T101HA ?
Regards,
Hans
[ 17.339160] atomisp-isp2 0000:00:03.0: Detected Cherrytrail version 54 (ISP2401) on T101HA
[ 17.343551] atomisp-isp2 0000:00:03.0: enabling device (0000 -> 0002)
[ 17.349857] atomisp-isp2 0000:00:03.0: ISP HPLL frequency base = 1600 MHz
[ 17.503537] atomisp: Loaded firmware version 'irci_stable_candrpv_0415_20150521_0458'.
[ 17.557614] input: Intel HDMI/DP LPE Audio HDMI/DP,pcm=0 as /devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0/input20
[ 17.565192] input: Intel HDMI/DP LPE Audio HDMI/DP,pcm=1 as /devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0/input21
[ 17.570399] input: Intel HDMI/DP LPE Audio HDMI/DP,pcm=2 as /devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0/input22
[ 17.918031] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[ 17.952066] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[ 17.985961] input: Intel HID events as /devices/pci0000:00/INT33D5:00/input/input23
[ 18.027489] intel_sst_acpi 808622A8:00: LPE base: 0x91400000 size:0x200000
[ 18.031435] intel_sst_acpi 808622A8:00: IRAM base: 0x914c0000
[ 18.040266] intel_sst_acpi 808622A8:00: DRAM base: 0x91500000
[ 18.046614] intel_sst_acpi 808622A8:00: SHIM base: 0x91540000
[ 18.052951] intel_sst_acpi 808622A8:00: Mailbox base: 0x91544000
[ 18.060278] intel_sst_acpi 808622A8:00: DDR base: 0x20000000
[ 18.064686] rt5645 i2c-10EC3270:00: supply avdd not found, using dummy regulator
[ 18.071011] rt5645 i2c-10EC3270:00: supply cpvdd not found, using dummy regulator
[ 18.071123] intel_sst_acpi 808622A8:00: Got drv data max stream 25
[ 18.108451] atomisp_ov2680: module is from the staging directory, the quality is unknown, you have been warned.
[ 18.136465] ov2680 i2c-OVTI2680:00: ov2680_probe: ACPI detected it on bus ID=CAM1, HID=OVTI2680
[ 18.143419] ov2680 i2c-OVTI2680:00: gmin: power management provided via Dollar Cove TI PMIC (i2c addr 0x5e)
[ 18.148928] ov2680 i2c-OVTI2680:00: Found DMI entry for 'OVTI2680:00_CamClk'
[ 18.155196] ov2680 i2c-OVTI2680:00: Found DMI entry for 'OVTI2680:00_ClkSrc'
[ 18.160751] ov2680 i2c-OVTI2680:00: Found DMI entry for 'OVTI2680:00_CsiPort'
[ 18.166904] ov2680 i2c-OVTI2680:00: Found DMI entry for 'OVTI2680:00_CsiLanes'
[ 18.173829] ov2680 i2c-OVTI2680:00: Found DMI entry for 'gmin_V1P8GPIO'
[ 18.180318] ov2680 i2c-OVTI2680:00: Found DMI entry for 'gmin_V2P8GPIO'
[ 18.268406] ov2680 i2c-OVTI2680:00: camera pdata: port: 1 lanes: 1 order: 00000002
[ 18.277517] ov2680 i2c-OVTI2680:00: sensor_revision id = 0x2680, rev= 0
[ 18.297737] ov2680 i2c-OVTI2680:00: register atomisp i2c module type 1
[ 18.556333] atomisp-isp2 0000:00:03.0: Probing Subdev OVTI2680:00
[ 18.562458] atomisp-isp2 0000:00:03.0: Subdev OVTI2680:00 successfully register
[ 18.566047] atomisp-isp2 0000:00:03.0: detected 1 camera sensors
[ 18.571349] atomisp-isp2 0000:00:03.0: Entity type for entity ATOM ISP CSI2-port0 was not initialized!
[ 18.576474] atomisp-isp2 0000:00:03.0: Entity type for entity ATOM ISP CSI2-port1 was not initialized!
[ 18.580409] atomisp-isp2 0000:00:03.0: Entity type for entity ATOM ISP CSI2-port2 was not initialized!
[ 18.585391] atomisp-isp2 0000:00:03.0: Entity type for entity file_input_subdev was not initialized!
[ 18.590868] atomisp-isp2 0000:00:03.0: Entity type for entity tpg_subdev was not initialized!
[ 18.597985] atomisp-isp2 0000:00:03.0: Entity type for entity ATOMISP_SUBDEV_0 was not initialized!
[ 18.605481] atomisp-isp2 0000:00:03.0: Entity type for entity ATOMISP_SUBDEV_1 was not initialized!
[ 18.613965] atomisp: Loaded firmware version 'irci_stable_candrpv_0415_20150521_0458'.
[ 18.621420] atomisp-isp2 0000:00:03.0: css load fw failed.
[ 18.624687] atomisp-isp2 0000:00:03.0: Failed to init css.
[ 17.339160] atomisp-isp2 0000:00:03.0: Detected Cherrytrail version 54 (ISP2401) on T101HA
[ 17.343551] atomisp-isp2 0000:00:03.0: enabling device (0000 -> 0002)
[ 17.349857] atomisp-isp2 0000:00:03.0: ISP HPLL frequency base = 1600 MHz
[ 17.503537] atomisp: Loaded firmware version 'irci_stable_candrpv_0415_20150521_0458'.
[ 17.557614] input: Intel HDMI/DP LPE Audio HDMI/DP,pcm=0 as /devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0/input20
[ 17.565192] input: Intel HDMI/DP LPE Audio HDMI/DP,pcm=1 as /devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0/input21
[ 17.570399] input: Intel HDMI/DP LPE Audio HDMI/DP,pcm=2 as /devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0/input22
[ 17.918031] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[ 17.952066] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[ 17.985961] input: Intel HID events as /devices/pci0000:00/INT33D5:00/input/input23
[ 18.027489] intel_sst_acpi 808622A8:00: LPE base: 0x91400000 size:0x200000
[ 18.031435] intel_sst_acpi 808622A8:00: IRAM base: 0x914c0000
[ 18.040266] intel_sst_acpi 808622A8:00: DRAM base: 0x91500000
[ 18.046614] intel_sst_acpi 808622A8:00: SHIM base: 0x91540000
[ 18.052951] intel_sst_acpi 808622A8:00: Mailbox base: 0x91544000
[ 18.060278] intel_sst_acpi 808622A8:00: DDR base: 0x20000000
[ 18.064686] rt5645 i2c-10EC3270:00: supply avdd not found, using dummy regulator
[ 18.071011] rt5645 i2c-10EC3270:00: supply cpvdd not found, using dummy regulator
[ 18.071123] intel_sst_acpi 808622A8:00: Got drv data max stream 25
[ 18.108451] atomisp_ov2680: module is from the staging directory, the quality is unknown, you have been warned.
[ 18.136465] ov2680 i2c-OVTI2680:00: ov2680_probe: ACPI detected it on bus ID=CAM1, HID=OVTI2680
[ 18.143419] ov2680 i2c-OVTI2680:00: gmin: power management provided via Dollar Cove TI PMIC (i2c addr 0x5e)
[ 18.148928] ov2680 i2c-OVTI2680:00: Found DMI entry for 'OVTI2680:00_CamClk'
[ 18.155196] ov2680 i2c-OVTI2680:00: Found DMI entry for 'OVTI2680:00_ClkSrc'
[ 18.160751] ov2680 i2c-OVTI2680:00: Found DMI entry for 'OVTI2680:00_CsiPort'
[ 18.166904] ov2680 i2c-OVTI2680:00: Found DMI entry for 'OVTI2680:00_CsiLanes'
[ 18.173829] ov2680 i2c-OVTI2680:00: Found DMI entry for 'gmin_V1P8GPIO'
[ 18.180318] ov2680 i2c-OVTI2680:00: Found DMI entry for 'gmin_V2P8GPIO'
[ 18.268406] ov2680 i2c-OVTI2680:00: camera pdata: port: 1 lanes: 1 order: 00000002
[ 18.277517] ov2680 i2c-OVTI2680:00: sensor_revision id = 0x2680, rev= 0
[ 18.297737] ov2680 i2c-OVTI2680:00: register atomisp i2c module type 1
[ 18.556333] atomisp-isp2 0000:00:03.0: Probing Subdev OVTI2680:00
[ 18.562458] atomisp-isp2 0000:00:03.0: Subdev OVTI2680:00 successfully register
[ 18.566047] atomisp-isp2 0000:00:03.0: detected 1 camera sensors
[ 18.571349] atomisp-isp2 0000:00:03.0: Entity type for entity ATOM ISP CSI2-port0 was not initialized!
[ 18.576474] atomisp-isp2 0000:00:03.0: Entity type for entity ATOM ISP CSI2-port1 was not initialized!
[ 18.580409] atomisp-isp2 0000:00:03.0: Entity type for entity ATOM ISP CSI2-port2 was not initialized!
[ 18.585391] atomisp-isp2 0000:00:03.0: Entity type for entity file_input_subdev was not initialized!
[ 18.590868] atomisp-isp2 0000:00:03.0: Entity type for entity tpg_subdev was not initialized!
[ 18.597985] atomisp-isp2 0000:00:03.0: Entity type for entity ATOMISP_SUBDEV_0 was not initialized!
[ 18.605481] atomisp-isp2 0000:00:03.0: Entity type for entity ATOMISP_SUBDEV_1 was not initialized!
[ 18.613965] atomisp: Loaded firmware version 'irci_stable_candrpv_0415_20150521_0458'.
[ 18.621420] atomisp-isp2 0000:00:03.0: css load fw failed.
[ 18.624687] atomisp-isp2 0000:00:03.0: Failed to init css.
