The current code checks that the whole OOB area is erased.
This is a problem when JFFS2 cleanmarkers are added to the OOB, since it will
fail due to the usable OOB bytes not being 0xff.
Correct this by only checking that data and ECC bytes aren't 0xff.
Fixes: 02b88eea9f9c ("mtd: brcmnand: Add check for erased page bitflips")
Signed-off-by: Álvaro Fernández Rojas <noltari@xxxxxxxxx>
---
v4: Use mtd_ooblayout_ecc function, rename oob to ecc_bytes and remove unused
sas variable.
v3: Fix commit log and merge nand_check_erased_ecc_chunk calls.
v2: Add Fixes tag
drivers/mtd/nand/raw/brcmnand/brcmnand.c | 19 +++++++++++--------
1 file changed, 11 insertions(+), 8 deletions(-)
diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
index e4e3ceeac38f..a001483b3614 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -2018,28 +2018,31 @@ static int brcmnand_read_by_pio(struct mtd_info *mtd, struct nand_chip *chip,
static int brcmstb_nand_verify_erased_page(struct mtd_info *mtd,
struct nand_chip *chip, void *buf, u64 addr)
{
- int i, sas;
- void *oob = chip->oob_poi;
+ struct mtd_oob_region ecc;
+ int i;
int bitflips = 0;
int page = addr >> chip->page_shift;
int ret;
+ void *ecc_bytes;
void *ecc_chunk;
if (!buf)
buf = nand_get_data_buf(chip);
- sas = mtd->oobsize / chip->ecc.steps;
-
/* read without ecc for verification */
ret = chip->ecc.read_page_raw(chip, buf, true, page);
if (ret)
return ret;
- for (i = 0; i < chip->ecc.steps; i++, oob += sas) {
+ for (i = 0; i < chip->ecc.steps; i++) {
ecc_chunk = buf + chip->ecc.size * i;
- ret = nand_check_erased_ecc_chunk(ecc_chunk,
- chip->ecc.size,
- oob, sas, NULL, 0,
+
+ mtd_ooblayout_ecc(mtd, i, &ecc);
+ ecc_bytes = chip->oob_poi + ecc.offset;
+
+ ret = nand_check_erased_ecc_chunk(ecc_chunk, chip->ecc.size,
+ ecc_bytes, ecc.length,
+ NULL, 0,
chip->ecc.strength);
if (ret < 0)
return ret;
--
2.26.2
