From: Dongchun Zhu <dongchun.zhu@xxxxxxxxxxxx>
This patch adds documentation of device tree in YAML schema for the
OV8856 CMOS image sensor.
Signed-off-by: Dongchun Zhu <dongchun.zhu@xxxxxxxxxxxx>
Signed-off-by: Robert Foss <robert.foss@xxxxxxxxxx>
Reviewed-by: Maxime Ripard <mripard@xxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
- Changes since v10:
* Dongchun: Sort by maintainers entry by file name
* Rob: Added r-b
* Sakari: List Dongchun as the maintainer
- Changes since v9:
* Remove remote-endpoint property
* Marco: Make port property required again
* Sakari: Remove Ben as a maintainer
* Sakari: Replace data-lanes with const items
* Sakari: Remove clock-lanes property
* Sakari & Rob Herring: Change type of link-frequency
work around dt-schema bug
- Changes since v8:
* Maxime: Added r-b
- Changes since v7:
* Marco: Make 'port' property optional
* Maxime & Sakari: Add 'link-frequencies' property to dt binding
* Rob: Improve description for 'port' property
- Changes since v6:
* Marco: remove qcom specifics from DT example
- Changes since v5:
* Add assigned-clocks and assigned-clock-rates
* Rob: dt-schema errors
- Changes since v4:
* Fabio: Change reset-gpio to GPIO_ACTIVE_LOW, explain in description
* Add clock-lanes property to example
* Rob: Fix syntax error in devicetree example
- Changes since v3:
* robher: Fix syntax error
* robher: Removed maxItems
* Fixes yaml 'make dt-binding-check' errors
- Changes since v2:
- Changes since v1:
Fixes comments from Sakari, Tomasz
* Add clock-frequency and link-frequencies in DT
.../devicetree/bindings/media/i2c/ov8856.yaml | 142 ++++++++++++++++++
MAINTAINERS | 3 +-
2 files changed, 144 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/media/i2c/ov8856.yaml
diff --git a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
new file mode 100644
index 000000000000..d6af685ad3ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2019 MediaTek Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ov8856.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV8856 CMOS Sensor Device Tree Bindings
+
+maintainers:
+ - Dongchun Zhu <dongchun.zhu@xxxxxxxxxxxx>
+
+description: |-
+ The Omnivision OV8856 is a high performance, 1/4-inch, 8 megapixel, CMOS
+ image sensor that delivers 3264x2448 at 30fps. It provides full-frame,
+ sub-sampled, and windowed 10-bit MIPI images in various formats via the
+ Serial Camera Control Bus (SCCB) interface. This chip is programmable
+ through I2C and two-wire SCCB. The sensor output is available via CSI-2
+ serial data output (up to 4-lane).
+
+properties:
+ compatible:
+ const: ovti,ov8856
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ description:
+ Input clock for the sensor.
+ items:
+ - const: xvclk
+
+ clock-frequency:
+ description:
+ Frequency of the xvclk clock in Hertz.
+
+ dovdd-supply:
+ description:
+ Definition of the regulator used as interface power supply.
+
+ avdd-supply:
+ description:
+ Definition of the regulator used as analog power supply.
+
+ dvdd-supply:
+ description:
+ Definition of the regulator used as digital power supply.
+
+ reset-gpios:
+ description:
+ The phandle and specifier for the GPIO that controls sensor reset.
+ This corresponds to the hardware pin XSHUTDOWN which is physically
+ active low.
+
+ port:
+ type: object
+ additionalProperties: false
+ description:
+ A node containing an output port node with an endpoint definition
+ as documented in
+ Documentation/devicetree/bindings/media/video-interfaces.txt
+
+ properties:
+ endpoint:
+ type: object
+
+ properties:
+ data-lanes:
+ description: |-
+ The driver only supports four-lane operation.
+ items:
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
+
+ link-frequencies:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint64-array
+ description:
+ Allowed data bus frequencies. 360000000, 180000000 Hz or both
+ are supported by the driver.
+
+
+ required:
+ - link-frequencies
+
+ required:
+ - endpoint
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - clock-frequency
+ - dovdd-supply
+ - avdd-supply
+ - dvdd-supply
+ - reset-gpios
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ov8856: camera@10 {
+ compatible = "ovti,ov8856";
+ reg = <0x10>;
+
+ reset-gpios = <&pio 111 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&clk_24m_cam>;
+
+ clocks = <&cam_osc>;
+ clock-names = "xvclk";
+ clock-frequency = <19200000>;
+
+ avdd-supply = <&mt6358_vcama2_reg>;
+ dvdd-supply = <&mt6358_vcamd_reg>;
+ dovdd-supply = <&mt6358_vcamio_reg>;
+
+ port {
+ wcam_out: endpoint {
+ remote-endpoint = <&mipi_in_wcam>;
+ data-lanes = <1 2 3 4>;
+ link-frequencies = /bits/ 64 <360000000>;
+ };
+ };
+ };
+ };
+...
\ No newline at end of file
diff --git a/MAINTAINERS b/MAINTAINERS
index 26f281d9f32a..2bc8555a980e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12484,10 +12484,11 @@ F: Documentation/devicetree/bindings/media/i2c/ov7740.txt
F: drivers/media/i2c/ov7740.c
OMNIVISION OV8856 SENSOR DRIVER
-M: Ben Kao <ben.kao@xxxxxxxxx>
+M: Dongchun Zhu <dongchun.zhu@xxxxxxxxxxxx>
L: linux-media@xxxxxxxxxxxxxxx
S: Maintained
T: git git://linuxtv.org/media_tree.git
+F: Documentation/devicetree/bindings/media/i2c/ov8856.yaml
F: drivers/media/i2c/ov8856.c
OMNIVISION OV9640 SENSOR DRIVER
--
2.25.1
