On 08/05/2020 15:10, Mauro Carvalho Chehab wrote: > When we added support for omap3, back in 2010, we added a new > type of V4L2 devices that aren't fully controlled via the V4L2 > device node. > > Yet, we have never clearly documented in the V4L2 specification > the differences between the two types. > > Let's document them based on the the current implementation. > > Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx> > --- > .../userspace-api/media/v4l/open.rst | 54 ++++++++++++++++--- > 1 file changed, 48 insertions(+), 6 deletions(-) > > diff --git a/Documentation/userspace-api/media/v4l/open.rst b/Documentation/userspace-api/media/v4l/open.rst > index ee4c8f123815..8a9f766ab855 100644 > --- a/Documentation/userspace-api/media/v4l/open.rst > +++ b/Documentation/userspace-api/media/v4l/open.rst > @@ -13,6 +13,48 @@ > Opening and Closing Devices > *************************** > > +.. _v4l2_hardware_control: > + > +Controlling a hardware peripheral via V4L2 > +========================================== > + > +V4L2 hardware peripheral is usually complex: support for it is V4L2 -> A V4L2 > +implemented via a bridge driver and often by several additional drivers. > +The bridge driver exposes one or more V4L2 device nodes > +(see :ref:`v4l2_device_naming`). > + > +There are other drivers providing support for other components of > +the hardware, with may also expose device nodes, called V4L2 sub-devices. with -> which > + > +When such V4L2 sub-devices are exposed, they allow controlling > +other hardware components - usually connected via a serial bus (like other -> those other > +I²C, SMBus or SPI). Depending on the bridge driver, those sub-devices > +can be controlled indirectly via the bridge driver or explicitly via > +the :ref:`Media Controller <media_controller>` and via the > +:ref:`V4L2 sub-devices <subdev>`. > + > +The devices that require the use of the > +:ref:`Media Controller <media_controller>` are called **MC-centric** > +devices. The devices that are fully controlled via V4L2 device nodes > +are called **video-node-centric**. > + > +Userspace can check if a V4L2 hardware peripheral is MC-centric by > +calling :ref:`VIDIOC_QUERYCAP` and checking the > +:ref:`device_caps field <device-capabilities>`. > + > +If the device returns ``V4L2_CAP_IO_MC`` flag at ``device_caps``, > +it is MC-centric, otherwise, it is video-node-centric. then it is MC-centric, otherwise it is video-node-centric. > + > +It is required for MC-centric hardware to identify the V4L2 > +sub-devices and to configure the pipelines via the > +:ref:`media controller API <media_controller>` before using the peripheral. > +Also, the sub-devices' configuration shall be controlled via the > +:ref:`sub-device API <subdev>`. > + > +.. note:: > + > + A video-node-centric may still provide a both media-controller and a both -> the > + sub-device interfaces as well. Add: However, in that case the media-controller and the sub-device interfaces are read-only and just provide information about the device. The actual configuration is done via the video nodes. > > .. _v4l2_device_naming: > > @@ -109,7 +151,7 @@ Related Devices > Devices can support several functions. For example video capturing, VBI > capturing and radio support. > > -The V4L2 API creates different nodes for each of these functions. > +The V4L2 API creates different V4L2 device nodes for each of these functions. > > The V4L2 API was designed with the idea that one device node could > support all functions. However, in practice this never worked: this > @@ -119,17 +161,17 @@ switching a device node between different functions only works when > using the streaming I/O API, not with the > :ref:`read() <func-read>`/\ :ref:`write() <func-write>` API. > > -Today each device node supports just one function. > +Today each V4L2 device node supports just one function. > > Besides video input or output the hardware may also support audio > sampling or playback. If so, these functions are implemented as ALSA PCM > devices with optional ALSA audio mixer devices. > > One problem with all these devices is that the V4L2 API makes no > -provisions to find these related devices. Some really complex devices > -use the Media Controller (see :ref:`media_controller`) which can be > -used for this purpose. But most drivers do not use it, and while some > -code exists that uses sysfs to discover related devices (see > +provisions to find these related V4L2 device nodes. Some really complex > +hardware use the Media Controller (see :ref:`media_controller`) which can > +be used for this purpose. But several drivers do not use it, and while some > +code exists that uses sysfs to discover related V4L2 device nodes (see > libmedia_dev in the > `v4l-utils <http://git.linuxtv.org/cgit.cgi/v4l-utils.git/>`__ git > repository), there is no library yet that can provide a single API > Regards, Hans
