Hi List, Ages ago I wrote about trying to get a MSI TV Anywhere A/D V1.1 to work (in my MythBackend, but that part isn't important). Doing a quick search notice this was over 2 years ago! The original thread on the archives is here: http://www.mail-archive.com/linux-dvb@xxxxxxxxxxx/msg28514.html Anyhow, at the time I gave up as it just wouldn't play. As some time has passed and was messing around with hardware decided to pull out the card and give it another go. It looks promising still, but still doesn't work :( Has anyone managed to get this card working in the mean time, or should I give up for sure this time and bin it? :( Cheers, Robin P.S. Some info to help out... dmesg gives this on boot: saa7130/34: v4l2 driver version 0.2.15 loaded saa7134 0000:07:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 saa7133[0]: found at 0000:07:00.0, rev: 209, irq: 21, latency: 255, mmio: 0xf37ff000 saa7133[0]: subsystem: 1462:8625, board: MSI TV@nywhere A/D v1.1 [card=135,autodetected] saa7133[0]: board init: gpio is 100 IRQ 21/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs saa7133[0]: i2c eeprom 00: 62 14 25 86 ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff i2c-adapter i2c-1: Invalid 7-bit address 0x7a tuner 1-004b: chip found @ 0x96 (saa7133[0]) tda829x 1-004b: setting tuner address to 61 usbcore: registered new interface driver snd-usb-audio tda829x 1-004b: type set to tda8290+75a saa7133[0]: dsp access error saa7133[0]: registered device video1 [v4l2] saa7133[0]: registered device vbi0 saa7133[0]: registered device radio0 dvb_init() allocating 1 frontend DVB: registering new adapter (saa7133[0]) DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)... tda1004x: setting up plls for 48MHz sampling clock When one tries to use the device this sort of thing happens: tda1004x: setting up plls for 48MHz sampling clock tda1004x: found firmware revision 20 -- ok tda1004x: setting up plls for 48MHz sampling clock tda1004x: found firmware revision 20 -- ok tda1004x: setting up plls for 48MHz sampling clock tda1004x: found firmware revision 33 -- invalid tda1004x: trying to boot from eeprom tda1004x: found firmware revision 33 -- invalid tda1004x: waiting for firmware upload... saa7134 0000:07:00.0: firmware: requesting dvb-fe-tda10046.fw tda1004x: found firmware revision 33 -- invalid tda1004x: firmware upload failed tda1004x: setting up plls for 48MHz sampling clock tda1004x: found firmware revision ea -- invalid tda1004x: trying to boot from eeprom tda1004x: found firmware revision ea -- invalid tda1004x: waiting for firmware upload... saa7134 0000:07:00.0: firmware: requesting dvb-fe-tda10046.fw tda1004x: Error during firmware upload tda1004x: found firmware revision ea -- invalid tda1004x: firmware upload failed saa7133[0]/dvb: could not access tda8290 I2C gate saa7133[0]/dvb: could not access tda8290 I2C gate saa7133[0]/dvb: could not access tda8290 I2C gate saa7133[0]/dvb: could not access tda8290 I2C gate saa7133[0]/dvb: could not access tda8290 I2C gate saa7133[0]/dvb: could not access tda8290 I2C gate tda827xa_set_params: could not write to tuner at addr: 0xc2 saa7133[0]/dvb: could not access tda8290 I2C gate saa7133[0]/dvb: could not access tda8290 I2C gate saa7133[0]/dvb: could not access tda8290 I2C gate saa7133[0]/dvb: could not access tda8290 I2C gate saa7133[0]/dvb: could not access tda8290 I2C gate tda827xa_set_params: could not write to tuner at addr: 0xc2 Oddly, the version of the firmware it reports seems to change even though the file does not change. That said, I have tried two different versions of firmware placed in '/lib/firmware'. One is 24478 bytes, the other is 24602 bytes. Neither seem to work. This is very sad :( -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
