Hi Robert, Thanks for the update. Some small matters below. On Tue, Apr 28, 2020 at 08:07:16PM +0200, Robert Foss wrote: > From: Dongchun Zhu <dongchun.zhu@xxxxxxxxxxxx> > > This patch adds documentation of device tree in YAML schema for the > OV8856 CMOS image sensor. > > Signed-off-by: Dongchun Zhu <dongchun.zhu@xxxxxxxxxxxx> > Signed-off-by: Robert Foss <robert.foss@xxxxxxxxxx> > --- > > - Changes since v7: > * Marco: Make 'port' property optional > * Maxime & Sakari: Add 'link-frequencies' property to dt binding > * robher: Improve description for 'port' property > > - Changes since v6: > * Marco: remove qcom specifics from DT example > > - Changes since v5: > * Add assigned-clocks and assigned-clock-rates > * robher: dt-schema errors > > - Changes since v4: > * Fabio: Change reset-gpio to GPIO_ACTIVE_LOW, explain in description > * Add clock-lanes property to example > * robher: Fix syntax error in devicetree example > > - Changes since v3: > * robher: Fix syntax error > * robher: Removed maxItems > * Fixes yaml 'make dt-binding-check' errors > > - Changes since v2: > Fixes comments from from Andy, Tomasz, Sakari, Rob. > * Convert text documentation to YAML schema. > > - Changes since v1: > Fixes comments from Sakari, Tomasz > * Add clock-frequency and link-frequencies in DT > > .../devicetree/bindings/media/i2c/ov8856.yaml | 140 ++++++++++++++++++ > MAINTAINERS | 1 + > 2 files changed, 141 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/i2c/ov8856.yaml > > diff --git a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml > new file mode 100644 > index 000000000000..f78d3eae81cb > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml > @@ -0,0 +1,140 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +# Copyright (c) 2019 MediaTek Inc. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/i2c/ov8856.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Omnivision OV8856 CMOS Sensor Device Tree Bindings > + > +maintainers: > + - Ben Kao <ben.kao@xxxxxxxxx> > + - Dongchun Zhu <dongchun.zhu@xxxxxxxxxxxx> I guess Dongchun would be the maintainer for these bindings, not Ben. Please also cc Ben in the next version. > + > +description: |- > + The Omnivision OV8856 is a high performance, 1/4-inch, 8 megapixel, CMOS > + image sensor that delivers 3264x2448 at 30fps. It provides full-frame, > + sub-sampled, and windowed 10-bit MIPI images in various formats via the > + Serial Camera Control Bus (SCCB) interface. This chip is programmable > + through I2C and two-wire SCCB. The sensor output is available via CSI-2 > + serial data output (up to 4-lane). > + > +properties: > + compatible: > + const: ovti,ov8856 > + > + reg: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + > + clock-names: > + description: > + Input clock for the sensor. > + items: > + - const: xvclk > + > + clock-frequency: > + description: > + Frequency of the xvclk clock in Hertz. > + > + dovdd-supply: > + description: > + Definition of the regulator used as interface power supply. > + > + avdd-supply: > + description: > + Definition of the regulator used as analog power supply. > + > + dvdd-supply: > + description: > + Definition of the regulator used as digital power supply. > + > + reset-gpios: > + description: > + The phandle and specifier for the GPIO that controls sensor reset. > + This corresponds to the hardware pin XSHUTDOWN which is physically > + active low. > + > + port: > + type: object > + additionalProperties: false > + description: > + A node containing an output port node with an endpoint definition > + as documented in > + Documentation/devicetree/bindings/media/video-interfaces.txt > + > + properties: > + endpoint: > + type: object > + > + properties: > + clock-lanes: Does the sensor support lane reordering? If not, please omit this. > + maxItems: 1 > + > + data-lanes: > + maxItems: 1 Hmm. The example has four lanes. Do I miss something? > + > + link-frequencies: > + maxItems: 1 The number of items in link-frequencies should not be limited to one either. > + > + remote-endpoint: true > + > + required: > + - clock-lanes > + - data-lanes > + - remote-endpoint > + - link-frequencies > + > + required: > + - endpoint > + > +required: > + - compatible > + - reg > + - clocks > + - clock-names > + - clock-frequency > + - dovdd-supply > + - avdd-supply > + - dvdd-supply > + - reset-gpios > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + ov8856: camera@10 { > + compatible = "ovti,ov8856"; > + reg = <0x10>; > + > + reset-gpios = <&pio 111 GPIO_ACTIVE_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&clk_24m_cam>; > + > + clocks = <&cam_osc>; > + clock-names = "xvclk"; > + clock-frequency = <19200000>; > + > + avdd-supply = <&mt6358_vcama2_reg>; > + dvdd-supply = <&mt6358_vcamd_reg>; > + dovdd-supply = <&mt6358_vcamio_reg>; > + > + port { > + wcam_out: endpoint { > + remote-endpoint = <&mipi_in_wcam>; > + clock-lanes = <0>; > + data-lanes = <1 2 3 4>; > + link-frequencies = /bits/ 64 <360000000 180000000>; > + }; > + }; > + }; > + }; > +... > \ No newline at end of file ^ > diff --git a/MAINTAINERS b/MAINTAINERS > index 26f281d9f32a..84b262afd13d 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -12489,6 +12489,7 @@ L: linux-media@xxxxxxxxxxxxxxx > S: Maintained > T: git git://linuxtv.org/media_tree.git > F: drivers/media/i2c/ov8856.c > +F: Documentation/devicetree/bindings/media/i2c/ov8856.yaml > > OMNIVISION OV9640 SENSOR DRIVER > M: Petr Cvek <petrcvekcz@xxxxxxxxx> -- Kind regards, Sakari Ailus
