Re: [RFC PATCH v1 3/5] media: tegra-video: Move PM runtime handle to streaming

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 4/28/20 7:59 AM, Dmitry Osipenko wrote:
External email: Use caution opening links or attachments


28.04.2020 17:51, Sowjanya Komatineni пишет:
On 4/28/20 6:59 AM, Dmitry Osipenko wrote:
External email: Use caution opening links or attachments


28.04.2020 07:20, Sowjanya Komatineni пишет:
diff --git a/drivers/staging/media/tegra-video/csi.c
b/drivers/staging/media/tegra-video/csi.c
index b3dd0c3..29ccdae 100644
--- a/drivers/staging/media/tegra-video/csi.c
+++ b/drivers/staging/media/tegra-video/csi.c
@@ -272,8 +272,25 @@ static int tegra_csi_s_stream(struct v4l2_subdev
*subdev, int enable)
        struct tegra_vi_channel *chan = v4l2_get_subdev_hostdata(subdev);
        struct tegra_csi_channel *csi_chan = to_csi_chan(subdev);
        struct tegra_csi *csi = csi_chan->csi;
+     int ret;
+
+     if (enable && atomic_add_return(1, &csi->clk_refcnt) == 1) {
+             ret = pm_runtime_get_sync(csi->dev);
+             if (ret < 0) {
+                     dev_err(csi->dev,
+                             "failed to get runtime PM: %d\n", ret);
+                     pm_runtime_put_noidle(csi->dev);
+                     atomic_dec(&csi->clk_refcnt);
+                     return ret;
+             }
+     }
+
+     ret = csi->ops->csi_streaming(csi_chan, chan->pg_mode, enable);

-     return csi->ops->csi_streaming(csi_chan, chan->pg_mode, enable);
+     if ((ret < 0 || !enable) && atomic_dec_and_test(&csi->clk_refcnt))
+             pm_runtime_put_sync(csi->dev);
Runtime PM maintains its own refcount, why these
clk_refcnt/power_on_refcnt are needed?
Streaming is per channel and we can't turn power/clocks off while other
channels may still be running.

All channels use the same CSI device. You should remove the custom
refcounting.

BTW, next time you'll really need to do refcounting, use the generic kref.

Before channel stream we enable power/clocks and after streaming we stop.

So without refcount, on stream stop of any of the channel RPM put turns power/clock but other channels will still be streaming.





[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux