Re: [PATCH v7 1/3] media: dt-bindings: ov8856: Document YAML bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 15 Apr 2020 at 18:21, Marco Felsch <m.felsch@xxxxxxxxxxxxxx> wrote:
>
> On 20-04-15 11:07, Rob Herring wrote:
> > On Wed, Apr 08, 2020 at 01:08:14PM +0200, Robert Foss wrote:
> > > From: Dongchun Zhu <dongchun.zhu@xxxxxxxxxxxx>
> > >
> > > This patch adds documentation of device tree in YAML schema for the
> > > OV8856 CMOS image sensor.
> > >
> > > Signed-off-by: Dongchun Zhu <dongchun.zhu@xxxxxxxxxxxx>
> > > Signed-off-by: Robert Foss <robert.foss@xxxxxxxxxx>
> > > ---
> > >
> > > - Changes since v6:
> > >   * Marco: remove qcom specifics from DT example
> > >
> > > - Changes since v5:
> > >   * Add assigned-clocks and assigned-clock-rates
> > >   * robher: dt-schema errors
> > >
> > > - Changes since v4:
> > >   * Fabio: Change reset-gpio to GPIO_ACTIVE_LOW, explain in description
> > >   * Add clock-lanes property to example
> > >   * robher: Fix syntax error in devicetree example
> > >
> > > - Changes since v3:
> > >   * robher: Fix syntax error
> > >   * robher: Removed maxItems
> > >   * Fixes yaml 'make dt-binding-check' errors
> > >
> > > - Changes since v2:
> > >   Fixes comments from from Andy, Tomasz, Sakari, Rob.
> > >   * Convert text documentation to YAML schema.
> > >
> > > - Changes since v1:
> > >   Fixes comments from Sakari, Tomasz
> > >   * Add clock-frequency and link-frequencies in DT
> > >
> > >  .../devicetree/bindings/media/i2c/ov8856.yaml | 143 ++++++++++++++++++
> > >  MAINTAINERS                                   |   1 +
> > >  2 files changed, 144 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/media/i2c/ov8856.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
> > > new file mode 100644
> > > index 000000000000..96bef5403d7e
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
> > > @@ -0,0 +1,143 @@
> > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > > +# Copyright (c) 2019 MediaTek Inc.
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/media/i2c/ov8856.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Omnivision OV8856 CMOS Sensor Device Tree Bindings
> > > +
> > > +maintainers:
> > > +  - Ben Kao <ben.kao@xxxxxxxxx>
> > > +  - Dongchun Zhu <dongchun.zhu@xxxxxxxxxxxx>
> > > +
> > > +description: |-
> > > +  The Omnivision OV8856 is a high performance, 1/4-inch, 8 megapixel, CMOS
> > > +  image sensor that delivers 3264x2448 at 30fps. It provides full-frame,
> > > +  sub-sampled, and windowed 10-bit MIPI images in various formats via the
> > > +  Serial Camera Control Bus (SCCB) interface. This chip is programmable
> > > +  through I2C and two-wire SCCB. The sensor output is available via CSI-2
> > > +  serial data output (up to 4-lane).
> > > +
> > > +properties:
> > > +  compatible:
> > > +    const: ovti,ov8856
> > > +
> > > +  reg:
> > > +    maxItems: 1
> > > +
> > > +  clocks:
> > > +    maxItems: 1
> > > +
> > > +  clock-names:
> > > +    description:
> > > +      Input clock for the sensor.
> > > +    items:
> > > +      - const: xvclk
> > > +
> > > +  assigned-clocks:
> > > +    description:
> > > +      Input clock for the sensor.
> > > +
> > > +  assigned-clock-rates:
> > > +    description:
> > > +      Frequency of the xvclk clock in Hertz.
> >
> > These 2 should have a 'maxItems: 1'
>
> Don't know why those properties are needed here.. IMHO this shouldn't be
> part of the binding or at least it should be optional and not required.
> All we need is the clocks and the clock-names property.

Thanks Marco, I'll make it optional for the next revision.

>
> > > +  dovdd-supply:
> > > +    description:
> > > +      Definition of the regulator used as interface power supply.
> > > +
> > > +  avdd-supply:
> > > +    description:
> > > +      Definition of the regulator used as analog power supply.
> > > +
> > > +  dvdd-supply:
> > > +    description:
> > > +      Definition of the regulator used as digital power supply.
> > > +
> > > +  reset-gpios:
> > > +    description:
> > > +      The phandle and specifier for the GPIO that controls sensor reset.
> > > +      This corresponds to the hardware pin XSHUTDOWN which is physically
> > > +      active low.
> > > +
> > > +  port:
> > > +    type: object
> > > +    additionalProperties: false
> > > +    description:
> > > +      A node containing input and output port nodes with endpoint definitions
> >
> > Only an output, right?
> >
> > > +      as documented in
> > > +      Documentation/devicetree/bindings/media/video-interfaces.txt
> > > +
> > > +    properties:
> > > +      endpoint:
> > > +        type: object
> > > +
> > > +        properties:
> > > +          clock-lanes:
> > > +            maxItems: 1
> > > +
> > > +          data-lanes:
> > > +            maxItems: 1
> > > +
> > > +          remote-endpoint: true
> > > +
> > > +        required:
> > > +          - clock-lanes
> > > +          - data-lanes
> > > +          - remote-endpoint
> > > +
> > > +    required:
> > > +      - endpoint
> > > +
> > > +required:
> > > +  - compatible
> > > +  - reg
> > > +  - clocks
> > > +  - clock-names
> > > +  - assigned-clocks
> > > +  - assigned-clock-rates
> > > +  - dovdd-supply
> > > +  - avdd-supply
> > > +  - dvdd-supply
> > > +  - reset-gpios
> > > +  - port
> > > +
> > > +additionalProperties: false
> > > +
> > > +examples:
> > > +  - |
> > > +    #include <dt-bindings/gpio/gpio.h>
> > > +
> > > +    i2c {
> > > +        #address-cells = <1>;
> > > +        #size-cells = <0>;
> > > +
> > > +        ov8856: camera@10 {
> > > +            compatible = "ovti,ov8856";
> > > +            reg = <0x10>;
> > > +
> > > +            reset-gpios = <&pio 111 GPIO_ACTIVE_LOW>;
> > > +            pinctrl-names = "default";
> > > +            pinctrl-0 = <&clk_24m_cam>;
> > > +
> > > +            clocks = <&cam_osc>;
> > > +            clock-names = "xvclk";
> > > +            assigned-clocks = <&cam_osc>;
> > > +            assigned-clock-rates = <19200000>;
> > > +
> > > +            avdd-supply = <&mt6358_vcama2_reg>;
> > > +            dvdd-supply = <&mt6358_vcamd_reg>;
> > > +            dovdd-supply = <&mt6358_vcamio_reg>;
> > > +
> > > +            port {
> > > +                wcam_out: endpoint {
> > > +                    remote-endpoint = <&mipi_in_wcam>;
> > > +                    clock-lanes = <0>;
> > > +                    data-lanes = <1 2 3 4>;
> > > +                    link-frequencies = /bits/ 64 <360000000 180000000>;
> > > +                };
> > > +            };
> > > +        };
> > > +    };
> > > +...
> > > \ No newline at end of file
> >
> > ^^^
> >
> > > diff --git a/MAINTAINERS b/MAINTAINERS
> > > index 534a8dc4f84a..3f35c6e9700a 100644
> > > --- a/MAINTAINERS
> > > +++ b/MAINTAINERS
> > > @@ -12465,6 +12465,7 @@ L:  linux-media@xxxxxxxxxxxxxxx
> > >  T: git git://linuxtv.org/media_tree.git
> > >  S: Maintained
> > >  F: drivers/media/i2c/ov8856.c
> > > +F: Documentation/devicetree/bindings/media/i2c/ov8856.yaml
> > >
> > >  OMNIVISION OV9650 SENSOR DRIVER
> > >  M: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
> > > --
> > > 2.25.1
> > >
> >
>
> --
> Pengutronix e.K.                           |                             |
> Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
> 31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux