Hi,
On 03/03/2010 02:17 PM, Erik Andrén wrote:
2010/3/3 Gabriel C<nix.or.die@xxxxxxxxxxxxxx>:
Hello,
I own a QuickCam Messanger webcam.. I didn't used it in ages but today
I plugged it in..
( Device 002: ID 046d:08da Logitech, Inc. QuickCam Messanger )
Now zc3xx and stv06xx are starting both to probe the device .. In
2.6.33 that result in a not working webcam.
( rmmod both&& modprobe zc3xx one seems to fix that )
On current git head zc3xx works fine even when both are probing the device.
Also I noticed stv06xx fails anyway for my webcam with this error:
....
[ 360.910243] STV06xx: Configuring camera
[ 360.910244] STV06xx: st6422 sensor detected
[ 360.910245] STV06xx: Initializing camera
[ 361.161948] STV06xx: probe of 6-1:1.0 failed with error -32
[ 361.161976] usbcore: registered new interface driver STV06xx
[ 361.161978] STV06xx: registered
.....
Next thing is stv06xx tells it is an st6422 sensor and does not work
with it while zc3xx tells it is an HV7131R(c) sensor and works fine
with it.
What is right ?
Hans,
As you added support for the st6422 sensor to the stv06xx subdriver I
imagine you best know what's going on.
I took the USB-ID in question from the out of tree v4l1 driver I was basing my
st6422 work on. Looking at the other ID's (which are very close together) and
combining that with this bug report, I think it is safe to say that the USB-ID
in question should be removed from the stv06xx driver.
Erik will you handle this, or shall I ?
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
