Re: [RFC PATCH v9 6/9] media: tegra: Add Tegra210 Video input driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 4/23/20 12:48 AM, Hans Verkuil wrote:
External email: Use caution opening links or attachments


On 22/04/2020 08:18, Sowjanya Komatineni wrote:
Tegra210 contains a powerful Video Input (VI) hardware controller
which can support up to 6 MIPI CSI camera sensors.

Each Tegra CSI port can be one-to-one mapped to VI channel and can
capture from an external camera sensor connected to CSI or from
built-in test pattern generator.

Tegra210 supports built-in test pattern generator from CSI to VI.

This patch adds a v4l2 capture driver with media interface for
Tegra210 built-in CSI to VI test pattern generator.

This patch includes TPG support only and all the video pipeline
configuration happens through the video device node.

Acked-by: Thierry Reding <treding@xxxxxxxxxx>
Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
---
  drivers/staging/media/Kconfig          |    2 +
  drivers/staging/media/Makefile         |    1 +
  drivers/staging/media/tegra/Kconfig    |   13 +
  drivers/staging/media/tegra/Makefile   |    8 +
  drivers/staging/media/tegra/TODO       |   10 +
  drivers/staging/media/tegra/common.h   |  262 ++++++++
  drivers/staging/media/tegra/csi.c      |  606 +++++++++++++++++
  drivers/staging/media/tegra/csi.h      |  149 +++++
  drivers/staging/media/tegra/tegra210.c |  709 ++++++++++++++++++++
  drivers/staging/media/tegra/tegra210.h |  190 ++++++
  drivers/staging/media/tegra/vi.c       | 1132 ++++++++++++++++++++++++++++++++
  drivers/staging/media/tegra/vi.h       |   83 +++
  drivers/staging/media/tegra/video.c    |  153 +++++
  drivers/staging/media/tegra/video.h    |   34 +
  14 files changed, 3352 insertions(+)
  create mode 100644 drivers/staging/media/tegra/Kconfig
  create mode 100644 drivers/staging/media/tegra/Makefile
  create mode 100644 drivers/staging/media/tegra/TODO
  create mode 100644 drivers/staging/media/tegra/common.h
  create mode 100644 drivers/staging/media/tegra/csi.c
  create mode 100644 drivers/staging/media/tegra/csi.h
  create mode 100644 drivers/staging/media/tegra/tegra210.c
  create mode 100644 drivers/staging/media/tegra/tegra210.h
  create mode 100644 drivers/staging/media/tegra/vi.c
  create mode 100644 drivers/staging/media/tegra/vi.h
  create mode 100644 drivers/staging/media/tegra/video.c
  create mode 100644 drivers/staging/media/tegra/video.h
With 'make menuconfig' I get this:

scripts/kconfig/mconf  Kconfig

WARNING: unmet direct dependencies detected for TEGRA_HOST1X
   Depends on [n]: HAS_IOMEM [=y] && (ARCH_TEGRA || ARM && COMPILE_TEST [=y])
   Selected by [y]:
   - VIDEO_TEGRA [=y] && STAGING [=y] && STAGING_MEDIA [=y] && MEDIA_SUPPORT [=y] && (ARCH_TEGRA || COMPILE_TEST [=y])

This is an x86_64 build with COMPILE_TEST set. I can provide my full .config if you need it.

CONFIG_TEGRA_HOST1X=y
CONFIG_VIDEO_TEGRA=y

Regards,

         Hans

Hi Hans,

In v7, changed Kconfig to remove ARM. But looks like we should limit

TEGRA_HOST1X also limits compile to ARM only so running VIDEO_TEGRA on x86_64 shows above warning.

We should limit compile to ARM for CONFIG_VIDEO_TEGRA.

Will update CONFIG_VIDEO_TEGRA dependency to use ARM && COMPILE_TEST like I had in previous version. Sorry about this.


Also, I see some changes went into latest linux-next staging media Kconfig, So, will have my patches on top of today's linux-next.

Thanks

Sowjanya





[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux