Re: [PATCH 09/12] utils: fix implicit float conversions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> On Apr 23, 2020, at 1:36 AM, Hans Verkuil <hverkuil@xxxxxxxxx> wrote:
> 
> On 22/04/2020 02:37, Rosen Penev wrote:
>> Found with -Wfloat-conversion
>> 
>> Signed-off-by: Rosen Penev <rosenp@xxxxxxxxx>
>> ---
>> utils/cec-ctl/cec-ctl.cpp                   | 4 ++--
>> utils/cec-ctl/cec-pin.cpp                   | 2 +-
>> utils/v4l2-compliance/v4l2-test-buffers.cpp | 2 +-
>> utils/v4l2-ctl/v4l2-ctl-misc.cpp            | 4 ++--
>> utils/v4l2-ctl/v4l2-ctl-streaming.cpp       | 2 +-
>> utils/v4l2-ctl/v4l2-ctl-subdev.cpp          | 2 +-
>> 6 files changed, 8 insertions(+), 8 deletions(-)
>> 
>> diff --git a/utils/cec-ctl/cec-ctl.cpp b/utils/cec-ctl/cec-ctl.cpp
>> index f4133494..f0e31aca 100644
>> --- a/utils/cec-ctl/cec-ctl.cpp
>> +++ b/utils/cec-ctl/cec-ctl.cpp
>> @@ -1507,8 +1507,8 @@ static void stress_test_power_cycle(struct node &node, unsigned cnt,
>>    srandom(seed);
>> 
>>    for (;;) {
>> -        unsigned usecs1 = mod_usleep ? random() % mod_usleep : sleep_before_on * 1000000;
>> -        unsigned usecs2 = mod_usleep ? random() % mod_usleep : sleep_before_off * 1000000;
>> +        unsigned usecs1 = mod_usleep ? random() % mod_usleep : (unsigned)(sleep_before_on * 1000000);
>> +        unsigned usecs2 = mod_usleep ? random() % mod_usleep : (unsigned)(sleep_before_off * 1000000);
> 
> Shouldn't this be static_cast<unsigned>? Same elsewhere.
Sure, but that’s beyond this patch. It should be unsigned int actually. Implicit int is bad.
> 
> Regards,
> 
>    Hans
> 
>> 
>>        usecs1 += min_usleep;
>>        usecs2 += min_usleep;
>> diff --git a/utils/cec-ctl/cec-pin.cpp b/utils/cec-ctl/cec-pin.cpp
>> index 0322ad5e..10abea37 100644
>> --- a/utils/cec-ctl/cec-pin.cpp
>> +++ b/utils/cec-ctl/cec-pin.cpp
>> @@ -261,7 +261,7 @@ static void cec_pin_rx_data_bit_was_low(__u64 ev_ts, __u64 usecs, __u64 usecs_mi
>>     * If the low drive starts at the end of a 0 bit, then the actual
>>     * maximum time that the bus can be low is the two summed.
>>     */
>> -    const unsigned max_low_drive = CEC_TIM_LOW_DRIVE_ERROR_MAX +
>> +    const unsigned max_low_drive = (unsigned)CEC_TIM_LOW_DRIVE_ERROR_MAX +
>>        CEC_TIM_DATA_BIT_0_LOW_MAX + CEC_TIM_MARGIN;
>> 
>>    low_usecs = usecs;
>> diff --git a/utils/v4l2-compliance/v4l2-test-buffers.cpp b/utils/v4l2-compliance/v4l2-test-buffers.cpp
>> index 93df7034..87c2e523 100644
>> --- a/utils/v4l2-compliance/v4l2-test-buffers.cpp
>> +++ b/utils/v4l2-compliance/v4l2-test-buffers.cpp
>> @@ -2597,7 +2597,7 @@ static void streamFmt(struct node *node, __u32 pixelformat, __u32 w, __u32 h,
>>    char hz[32] = "";
>> 
>>    if (!frame_count)
>> -        frame_count = f ? 1.0 / fract2f(f) : 10;
>> +        frame_count = f ? (unsigned)(1.0f / fract2f(f)) : 10;
>>    node->g_fmt(fmt);
>>    fmt.s_pixelformat(pixelformat);
>>    fmt.s_width(w);
>> diff --git a/utils/v4l2-ctl/v4l2-ctl-misc.cpp b/utils/v4l2-ctl/v4l2-ctl-misc.cpp
>> index cb933217..2851886a 100644
>> --- a/utils/v4l2-ctl/v4l2-ctl-misc.cpp
>> +++ b/utils/v4l2-ctl/v4l2-ctl-misc.cpp
>> @@ -320,7 +320,7 @@ void misc_set(cv4l_fd &_fd)
>>        parm.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
>>        parm.parm.capture.timeperframe.numerator = 1000;
>>        parm.parm.capture.timeperframe.denominator =
>> -            fps * parm.parm.capture.timeperframe.numerator;
>> +            (uint32_t)(fps * parm.parm.capture.timeperframe.numerator);
>> 
>>        if (doioctl(fd, VIDIOC_S_PARM, &parm) == 0) {
>>            struct v4l2_fract *tf = &parm.parm.capture.timeperframe;
>> @@ -338,7 +338,7 @@ void misc_set(cv4l_fd &_fd)
>>        parm.type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
>>        parm.parm.output.timeperframe.numerator = 1000;
>>        parm.parm.output.timeperframe.denominator =
>> -            output_fps * parm.parm.output.timeperframe.numerator;
>> +            (uint32_t)(output_fps * parm.parm.output.timeperframe.numerator);
>> 
>>        if (doioctl(fd, VIDIOC_S_PARM, &parm) == 0) {
>>            struct v4l2_fract *tf = &parm.parm.output.timeperframe;
>> diff --git a/utils/v4l2-ctl/v4l2-ctl-streaming.cpp b/utils/v4l2-ctl/v4l2-ctl-streaming.cpp
>> index 066a336a..6981a3cc 100644
>> --- a/utils/v4l2-ctl/v4l2-ctl-streaming.cpp
>> +++ b/utils/v4l2-ctl/v4l2-ctl-streaming.cpp
>> @@ -569,7 +569,7 @@ static void print_concise_buffer(FILE *f, cv4l_buffer &buf, cv4l_fmt &fmt,
>>    if (!skip_ts && (buf.g_flags() & V4L2_BUF_FLAG_TIMESTAMP_MASK) != V4L2_BUF_FLAG_TIMESTAMP_COPY) {
>>        double ts = buf.g_timestamp().tv_sec + buf.g_timestamp().tv_usec / 1000000.0;
>>        fprintf(f, " ts: %.06f", ts);
>> -        if (last_ts)
>> +        if (last_ts <= 0.0)
>>            fprintf(f, " delta: %.03f ms", (ts - last_ts) * 1000.0);
>>        last_ts = ts;
>> 
>> diff --git a/utils/v4l2-ctl/v4l2-ctl-subdev.cpp b/utils/v4l2-ctl/v4l2-ctl-subdev.cpp
>> index 747f1699..f1223084 100644
>> --- a/utils/v4l2-ctl/v4l2-ctl-subdev.cpp
>> +++ b/utils/v4l2-ctl/v4l2-ctl-subdev.cpp
>> @@ -487,7 +487,7 @@ void subdev_set(cv4l_fd &_fd)
>>            exit(1);
>>        }
>>        fival.interval.numerator = 1000;
>> -        fival.interval.denominator = set_fps * fival.interval.numerator;
>> +        fival.interval.denominator = (uint32_t)(set_fps * fival.interval.numerator);
>>        printf("Note: --set-subdev-fps is only for testing.\n"
>>               "Normally media-ctl is used to configure the video pipeline.\n");
>>        printf("ioctl: VIDIOC_SUBDEV_S_FRAME_INTERVAL (pad=%u)\n", fival.pad);
>> 
> 




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux