Hi Pavel,
On 04/04/2020 21:18, Pavel Machek wrote:
> Hi!
>
>>> ..but if I'm patient enough, it eventually starts working... somehow.
>>>
>>> Incoming data seems to go in reliably. Outgoing commands (such as
>>> change gain) don't seem to be unreliable.
>>>
>>> Any idea how to debug / what could be wrong?
>>
>> And I can force it to probe like this: which... makes it work, but
>> does not fix the outgoing commands.
>>
>> Any ideas?
You're on your own, I'm afraid.
I think I have one or two of these webcams, but they are in the Netherlands
while I am in Norway, and I have no idea when I will be back.
Frankly, I would recommend buying a uvc webcam rather than spending any time on
these old crappy webcams.
Regards,
Hans
>
> (Adding people from module_authors to the list.)
>
> Pavel
>
>> diff --git a/drivers/media/usb/gspca/sq930x.c b/drivers/media/usb/gspca/sq930x.c
>> index c3610247a90e..c9756c0a78df 100644
>> --- a/drivers/media/usb/gspca/sq930x.c
>> +++ b/drivers/media/usb/gspca/sq930x.c
>> @@ -7,6 +7,7 @@
>> * Copyright (C) 2007 Sam Revitch <samr7@xxxxxxxxxxxxxxxxx>
>> */
>>
>> +#define DEBUG
>> #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
>>
>> #define MODULE_NAME "sq930x"
>> @@ -446,7 +447,7 @@ static void reg_w(struct gspca_dev *gspca_dev, u16 value, u16 index)
>> USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
>> value, index, NULL, 0,
>> 500);
>> - msleep(30);
>> + msleep(90);
>> if (ret < 0) {
>> pr_err("reg_w %04x %04x failed %d\n", value, index, ret);
>> gspca_dev->usb_err = ret;
>> @@ -635,19 +636,25 @@ static void cmos_probe(struct gspca_dev *gspca_dev)
>> SENSOR_MT9V111,
>> };
>>
>> + printk("CMOS Probing...\n");
>> for (i = 0; i < ARRAY_SIZE(probe_order); i++) {
>> + printk("Probing type %d...\n", i);
>> +
>> sensor = &sensor_tb[probe_order[i]];
>> ucbus_write(&sd->gspca_dev, sensor->cmd, sensor->cmd_len, 8);
>> gpio_init(sd, sensor->gpio);
>> - msleep(100);
>> + msleep(200);
>> reg_r(gspca_dev, (sensor->i2c_addr << 8) | 0x001c, 1);
>> - msleep(100);
>> - if (gspca_dev->usb_buf[0] != 0)
>> + msleep(200);
>> + if (gspca_dev->usb_buf[0] != 0) {
>> + printk("#### LUCKY! Have type %d\n", i);
>> break;
>> + }
>> }
>> if (i >= ARRAY_SIZE(probe_order)) {
>> - pr_err("Unknown sensor\n");
>> - gspca_dev->usb_err = -EINVAL;
>> + printk("Unknown sensor ... hmm?\n");
>> + sd->sensor = probe_order[i-1];
>> + //gspca_dev->usb_err = -EINVAL;
>> return;
>> }
>> sd->sensor = probe_order[i];
>>
>>
>> --
>> (english) http://www.livejournal.com/~pavelmachek
>> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
>
>
>
