Add nodes for Mediatek's sensor interface device. Sensor interface module
embedded in Mediatek SOCs, works as a HW camera interface controller
intended for image and data transmission between cameras and host devices.
Signed-off-by: Louis Kuo <louis.kuo@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 25 ++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 433c62efab2d..5c7bed5a6f32 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -715,5 +715,30 @@
reg = <0 0x1a000000 0 0x1000>;
#clock-cells = <1>;
};
+ seninf: seninf@1a040000 {
+ compatible = "mediatek,mt8183-seninf";
+ reg = <0 0x1a040000 0 0x8000>,
+ <0 0x11c80000 0 0x6000>;
+ reg-names = "base", "rx";
+ interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8183_POWER_DOMAIN_CAM>;
+ clocks = <&camsys CLK_CAM_SENINF>,
+ <&topckgen CLK_TOP_MUX_SENINF>;
+ clock-names = "clk_cam_seninf", "clk_top_mux_seninf";
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@4 {
+ reg = <4>;
+
+ seninf_camisp_endpoint: endpoint {
+ remote-endpoint = <&camisp_endpoint>;
+ };
+ };
+ };
+ };
};
};
--
2.18.0
