On 4/9/20 9:29 AM, Fabio Estevam wrote:
The current instructions for imx6q-sabresd do not lead to functional
capture on OV5640 MIPI CSI-2.
The reason for this, as explained by Steve Longerbeam, is that OV5640 by
default transmits on virtual channel 0, not channel 1 as is given in the
instructions.
Adapt the instructions to use virtual channel 0 so that a working
camera setup can be achieved on imx6q-sabresd.
Also, since we are using an IC direct conversion pipeline, improve
the example by demonstrating colorspace and scaling.
Signed-off-by: Fabio Estevam <festevam@xxxxxxxxx>
Reviewed-by: Steve Longerbeam<slongerbeam@xxxxxxxxx>
---
Changes since v1:
- Demonstrate colorspace and scaling. (Steve)
Documentation/media/v4l-drivers/imx.rst | 31 ++++++++++++-------------
1 file changed, 15 insertions(+), 16 deletions(-)
diff --git a/Documentation/media/v4l-drivers/imx.rst b/Documentation/media/v4l-drivers/imx.rst
index 1246573c1019..b8df91f83f14 100644
--- a/Documentation/media/v4l-drivers/imx.rst
+++ b/Documentation/media/v4l-drivers/imx.rst
@@ -645,30 +645,29 @@ The OV5640 module connects to MIPI connector J5 (sorry I don't have the
compatible module part number or URL).
The following example configures a direct conversion pipeline to capture
-from the OV5640, transmitting on MIPI CSI-2 virtual channel 1. $sensorfmt
-can be any format supported by the OV5640. $sensordim is the frame
-dimension part of $sensorfmt (minus the mbus pixel code). $outputfmt can
-be any format supported by the ipu1_ic_prpenc entity at its output pad:
+from the OV5640, transmitting on MIPI CSI-2 virtual channel 0. It also
+shows colorspace conversion and scaling at IC output.
.. code-block:: none
# Setup links
media-ctl -l "'ov5640 1-003c':0 -> 'imx6-mipi-csi2':0[1]"
- media-ctl -l "'imx6-mipi-csi2':2 -> 'ipu1_csi1':0[1]"
- media-ctl -l "'ipu1_csi1':1 -> 'ipu1_ic_prp':0[1]"
+ media-ctl -l "'imx6-mipi-csi2':1 -> 'ipu1_csi0_mux':0[1]"
+ media-ctl -l "'ipu1_csi0_mux':2 -> 'ipu1_csi0':0[1]"
+ media-ctl -l "'ipu1_csi0':1 -> 'ipu1_ic_prp':0[1]"
media-ctl -l "'ipu1_ic_prp':1 -> 'ipu1_ic_prpenc':0[1]"
media-ctl -l "'ipu1_ic_prpenc':1 -> 'ipu1_ic_prpenc capture':0[1]"
# Configure pads
- media-ctl -V "'ov5640 1-003c':0 [fmt:$sensorfmt field:none]"
- media-ctl -V "'imx6-mipi-csi2':2 [fmt:$sensorfmt field:none]"
- media-ctl -V "'ipu1_csi1':1 [fmt:AYUV32/$sensordim field:none]"
- media-ctl -V "'ipu1_ic_prp':1 [fmt:AYUV32/$sensordim field:none]"
- media-ctl -V "'ipu1_ic_prpenc':1 [fmt:$outputfmt field:none]"
-
-Streaming can then begin on "ipu1_ic_prpenc capture" node. The v4l2-ctl
-tool can be used to select any supported YUV or RGB pixelformat on the
-capture device node.
-
+ media-ctl -V "'ov5640 1-003c':0 [fmt:UYVY2X8/640x480]"
+ media-ctl -V "'imx6-mipi-csi2':1 [fmt:UYVY2X8/640x480]"
+ media-ctl -V "'ipu1_csi0_mux':2 [fmt:UYVY2X8/640x480]"
+ media-ctl -V "'ipu1_csi0':1 [fmt:AYUV32/640x480]"
+ media-ctl -V "'ipu1_ic_prp':1 [fmt:AYUV32/640x480]"
+ media-ctl -V "'ipu1_ic_prpenc':1 [fmt:ARGB8888_1X32/800x600]"
+ # Set a format at the capture interface
+ v4l2-ctl -d /dev/video1 --set-fmt-video=pixelformat=RGB3
+
+Streaming can then begin on "ipu1_ic_prpenc capture" node.
Known Issues
------------
