On 4/8/20 5:32 AM, Fabio Estevam wrote:
In order to improve the documentation, provide the OV5640 MIPI module
part number that is used on the imx6q-sabresd board.
Signed-off-by: Fabio Estevam <festevam@xxxxxxxxx>
Reviewed-by: Steve Longerbeam <slongerbeam@xxxxxxxxx>
---
Documentation/media/v4l-drivers/imx.rst | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/media/v4l-drivers/imx.rst b/Documentation/media/v4l-drivers/imx.rst
index 3b4767f5f422..37b944f12d93 100644
--- a/Documentation/media/v4l-drivers/imx.rst
+++ b/Documentation/media/v4l-drivers/imx.rst
@@ -641,8 +641,8 @@ connects to i2c bus 1 and the OV5640 to i2c bus 2.
The device tree for SabreSD includes OF graphs for both the parallel
OV5642 and the MIPI CSI-2 OV5640, but as of this writing only the MIPI
CSI-2 OV5640 has been tested, so the OV5642 node is currently disabled.
-The OV5640 module connects to MIPI connector J5 (sorry I don't have the
-compatible module part number or URL).
+The OV5640 module connects to MIPI connector J5. The NXP part number
+for the OV5640 module that connects to the SabreSD board is H120729.
The following example configures a direct conversion pipeline to capture
from the OV5640, transmitting on MIPI CSI-2 virtual channel 0:
