On Mon, 2010-03-01 at 15:36 +0900, Dmitri Belimov wrote: > Hi All > > After rework of the IR subsystem, IR RC no more work in our TV cards. > As I see > call saa7134_probe_i2c_ir, > configure i2c > call i2c_new_device > > New i2c device not registred. > > The module kbd-i2c-ir loaded after i2c_new_device. Jean, There was also a problem reported with the cx23885 driver's I2C connected IR by Timothy Lenz: http://www.spinics.net/lists/linux-media/msg15122.html The failure mode sounds similar to Dmitri's, but maybe they are unrelated. I worked a bit with Timothy on IRC and the remote device fails to be detected whether ir-kbd-i2c is loaded before the cx23885 driver or after the cx23885 driver. I haven't found time to do any folow-up and I don't have any of the hardware in question. Do you have any thoughts or a suggested troubleshooting approach? Regards, Andy > I try to found what happens. > > With my best regards, Dmitry. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
