Right now, there are I2C drivers that don't depend on camera support before and after those. Move the camera support drivers to the end, and add a notice at the "endif", in order to make easier to maintain and to avoid adding extra dependencies at the other i2c/*/Kconfig files. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx> --- drivers/media/i2c/Kconfig | 218 +++++++++++++++++++------------------- 1 file changed, 107 insertions(+), 111 deletions(-) diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig index 4bc4cfea2f20..efd12bf4f8eb 100644 --- a/drivers/media/i2c/Kconfig +++ b/drivers/media/i2c/Kconfig @@ -581,6 +581,113 @@ config VIDEO_THS8200 To compile this driver as a module, choose M here: the module will be called ths8200. +comment "Video improvement chips" + +config VIDEO_UPD64031A + tristate "NEC Electronics uPD64031A Ghost Reduction" + depends on VIDEO_V4L2 && I2C + help + Support for the NEC Electronics uPD64031A Ghost Reduction + video chip. It is most often found in NTSC TV cards made for + Japan and is used to reduce the 'ghosting' effect that can + be present in analog TV broadcasts. + + To compile this driver as a module, choose M here: the + module will be called upd64031a. + +config VIDEO_UPD64083 + tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation" + depends on VIDEO_V4L2 && I2C + help + Support for the NEC Electronics uPD64083 3-Dimensional Y/C + separation video chip. It is used to improve the quality of + the colors of a composite signal. + + To compile this driver as a module, choose M here: the + module will be called upd64083. + +comment "Audio/Video compression chips" + +config VIDEO_SAA6752HS + tristate "Philips SAA6752HS MPEG-2 Audio/Video Encoder" + depends on VIDEO_V4L2 && I2C + select CRC32 + help + Support for the Philips SAA6752HS MPEG-2 video and MPEG-audio/AC-3 + audio encoder with multiplexer. + + To compile this driver as a module, choose M here: the + module will be called saa6752hs. + +comment "SDR tuner chips" + +config SDR_MAX2175 + tristate "Maxim 2175 RF to Bits tuner" + depends on VIDEO_V4L2 && MEDIA_SDR_SUPPORT && I2C + select REGMAP_I2C + help + Support for Maxim 2175 tuner. It is an advanced analog/digital + radio receiver with RF-to-Bits front-end designed for SDR solutions. + + To compile this driver as a module, choose M here; the + module will be called max2175. + +comment "Miscellaneous helper chips" + +config VIDEO_THS7303 + tristate "THS7303/53 Video Amplifier" + depends on VIDEO_V4L2 && I2C + help + Support for TI THS7303/53 video amplifier + + To compile this driver as a module, choose M here: the + module will be called ths7303. + +config VIDEO_M52790 + tristate "Mitsubishi M52790 A/V switch" + depends on VIDEO_V4L2 && I2C + help + Support for the Mitsubishi M52790 A/V switch. + + To compile this driver as a module, choose M here: the + module will be called m52790. + +config VIDEO_I2C + tristate "I2C transport video support" + depends on VIDEO_V4L2 && I2C + select VIDEOBUF2_VMALLOC + imply HWMON + help + Enable the I2C transport video support which supports the + following: + * Panasonic AMG88xx Grid-Eye Sensors + * Melexis MLX90640 Thermal Cameras + + To compile this driver as a module, choose M here: the + module will be called video-i2c + +config VIDEO_ST_MIPID02 + tristate "STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge" + depends on I2C && VIDEO_V4L2 + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + select V4L2_FWNODE + help + Support for STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge. + It is used to allow usage of CSI-2 sensor with PARALLEL port + controller. + + To compile this driver as a module, choose M here: the + module will be called st-mipid02. + +endmenu + +# +# All drivers that are related to Media Camera Support should be here +# + +if MEDIA_CAMERA_SUPPORT + comment "Camera sensor devices" config VIDEO_APTINA_PLL @@ -589,12 +696,6 @@ config VIDEO_APTINA_PLL config VIDEO_SMIAPP_PLL tristate -# -# All drivers that are related to Media Camera Support should be here -# - -if MEDIA_CAMERA_SUPPORT - config VIDEO_HI556 tristate "Hynix Hi-556 sensor support" depends on I2C && VIDEO_V4L2 @@ -1162,109 +1263,4 @@ config VIDEO_LM3646 endif # MEDIA_CAMERA_SUPPORT -# -# Other V4L2 drivers that aren't related with Camera support -# - -comment "Video improvement chips" - -config VIDEO_UPD64031A - tristate "NEC Electronics uPD64031A Ghost Reduction" - depends on VIDEO_V4L2 && I2C - help - Support for the NEC Electronics uPD64031A Ghost Reduction - video chip. It is most often found in NTSC TV cards made for - Japan and is used to reduce the 'ghosting' effect that can - be present in analog TV broadcasts. - - To compile this driver as a module, choose M here: the - module will be called upd64031a. - -config VIDEO_UPD64083 - tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation" - depends on VIDEO_V4L2 && I2C - help - Support for the NEC Electronics uPD64083 3-Dimensional Y/C - separation video chip. It is used to improve the quality of - the colors of a composite signal. - - To compile this driver as a module, choose M here: the - module will be called upd64083. - -comment "Audio/Video compression chips" - -config VIDEO_SAA6752HS - tristate "Philips SAA6752HS MPEG-2 Audio/Video Encoder" - depends on VIDEO_V4L2 && I2C - select CRC32 - help - Support for the Philips SAA6752HS MPEG-2 video and MPEG-audio/AC-3 - audio encoder with multiplexer. - - To compile this driver as a module, choose M here: the - module will be called saa6752hs. - -comment "SDR tuner chips" - -config SDR_MAX2175 - tristate "Maxim 2175 RF to Bits tuner" - depends on VIDEO_V4L2 && MEDIA_SDR_SUPPORT && I2C - select REGMAP_I2C - help - Support for Maxim 2175 tuner. It is an advanced analog/digital - radio receiver with RF-to-Bits front-end designed for SDR solutions. - - To compile this driver as a module, choose M here; the - module will be called max2175. - -comment "Miscellaneous helper chips" - -config VIDEO_THS7303 - tristate "THS7303/53 Video Amplifier" - depends on VIDEO_V4L2 && I2C - help - Support for TI THS7303/53 video amplifier - - To compile this driver as a module, choose M here: the - module will be called ths7303. - -config VIDEO_M52790 - tristate "Mitsubishi M52790 A/V switch" - depends on VIDEO_V4L2 && I2C - help - Support for the Mitsubishi M52790 A/V switch. - - To compile this driver as a module, choose M here: the - module will be called m52790. - -config VIDEO_I2C - tristate "I2C transport video support" - depends on VIDEO_V4L2 && I2C - select VIDEOBUF2_VMALLOC - imply HWMON - help - Enable the I2C transport video support which supports the - following: - * Panasonic AMG88xx Grid-Eye Sensors - * Melexis MLX90640 Thermal Cameras - - To compile this driver as a module, choose M here: the - module will be called video-i2c - -config VIDEO_ST_MIPID02 - tristate "STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge" - depends on I2C && VIDEO_V4L2 - select MEDIA_CONTROLLER - select VIDEO_V4L2_SUBDEV_API - select V4L2_FWNODE - help - Support for STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge. - It is used to allow usage of CSI-2 sensor with PARALLEL port - controller. - - To compile this driver as a module, choose M here: the - module will be called st-mipid02. - -endmenu - endif # VIDEO_V4L2 -- 2.25.1
