ov5647 is one of the two camera modules as described in https://tinkerboarding.co.uk/wiki/index.php/CSI-camera changes ported over from https://github.com/TinkerBoard/debian_kernel.git Reported-by: Karthik Poduval <karthik.poduval@xxxxxxxxx> Signed-off-by: Karthik Poduval <karthik.poduval@xxxxxxxxx> --- arch/arm/boot/dts/rk3288-tinker.dtsi | 37 ++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi index 312582c1bd37..720dd80ea3aa 100644 --- a/arch/arm/boot/dts/rk3288-tinker.dtsi +++ b/arch/arm/boot/dts/rk3288-tinker.dtsi @@ -107,6 +107,13 @@ startup-delay-us = <100000>; vin-supply = <&vcc_io>; }; + + ext_cam_clk: external-camera-clock { + compatible = "fixed-clock"; + clock-frequency = <25000000>; + clock-output-names = "CLK_CAMERA_25MHZ"; + #clock-cells = <0>; + }; }; &cpu0 { @@ -345,12 +352,42 @@ &i2c2 { status = "okay"; + camera0: ov5647@36 { + compatible = "ovti,ov5647"; + reg = <0x36>; + clocks = <&ext_cam_clk>; + status = "okay"; + enable-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + port { + ov5647_out: endpoint { + remote-endpoint = <&isp_mipi_in>; + data-lanes = <1 2>; + }; + }; + }; }; &i2c5 { status = "okay"; }; +&isp { + status = "okay"; + phys = <&mipi_phy_rx0>; + phy-names = "dphy"; + + port { + isp_mipi_in: endpoint { + remote-endpoint = <&ov5647_out>; + data-lanes = <1 2>; + }; + }; +}; + +&mipi_phy_rx0 { + status = "okay"; +}; + &i2s { #sound-dai-cells = <0>; status = "okay"; -- 2.17.1
