[PATCH 2/2] gspca pac7302: remove LED blinking when switching stream on and off

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Márton Németh <nm127@xxxxxxxxxxx>

The init sequences for PAC7302 contained register settings affecting
the LED state which can result blinking of the LED when it is set to
always on or always off. The blinking happened when the stream was
switched on or off.

Remove the register changes from the init sequence and handle it with
the function set_streaming_led().

Signed-off-by: Márton Németh <nm127@xxxxxxxxxxx>
---
--- a/linux/drivers/media/video/gspca/pac7302.c.orig	2010-02-27 01:00:30.000000000 +0100
+++ b/linux/drivers/media/video/gspca/pac7302.c	2010-02-27 01:00:49.000000000 +0100
@@ -322,13 +322,6 @@
 #define END_OF_SEQUENCE		0

 /* pac 7302 */
-static const __u8 init_7302[] = {
-/*	index,value */
-	0xff, 0x01,		/* page 1 */
-	0x78, 0x00,		/* deactivate */
-	0xff, 0x01,
-	0x78, 0x40,		/* led off */
-};
 static const __u8 start_7302[] = {
 /*	index, len, [value]* */
 	0xff, 1,	0x00,		/* page 0 */
@@ -364,7 +357,8 @@
 	0xff, 1,	0x01,		/* page 1 */
 	0x12, 3,	0x02, 0x00, 0x01,
 	0x3e, 2,	0x00, 0x00,
-	0x76, 5,	0x01, 0x20, 0x40, 0x00, 0xf2,
+	0x76, 2,	0x01, 0x20,
+	0x79, 2,	0x00, 0xf2,
 	0x7c, 1,	0x00,
 	0x7f, 10,	0x4b, 0x0f, 0x01, 0x2c, 0x02, 0x58, 0x03, 0x20,
 			0x02, 0x00,
@@ -388,8 +382,6 @@
 	0x2a, 5,	0xc8, 0x00, 0x18, 0x12, 0x22,
 	0x64, 8,	0x00, 0x00, 0xf0, 0x01, 0x14, 0x44, 0x44, 0x44,
 	0x6e, 1,	0x08,
-	0xff, 1,	0x01,		/* page 1 */
-	0x78, 1,	0x00,
 	0, END_OF_SEQUENCE		/* end of sequence */
 };

@@ -487,15 +479,6 @@
 	}
 }

-static void reg_w_seq(struct gspca_dev *gspca_dev,
-		const __u8 *seq, int len)
-{
-	while (--len >= 0) {
-		reg_w(gspca_dev, seq[0], seq[1]);
-		seq += 2;
-	}
-}
-
 /* load the beginning of a page */
 static void reg_w_page(struct gspca_dev *gspca_dev,
 			const __u8 *page, int len)
@@ -787,7 +770,7 @@
 /* this function is called at probe and resume time for pac7302 */
 static int sd_init(struct gspca_dev *gspca_dev)
 {
-	reg_w_seq(gspca_dev, init_7302, sizeof(init_7302)/2);
+	set_streaming_led(gspca_dev, 0);
 	return gspca_dev->usb_err;
 }


--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux