[PATCH v3 03/19] media: ti-vpe: cal: fix use of wrong macro

[Tomi Valkeinen <tomi.valkeinen@xxxxxx>]

i913_errata() sets a bit to 1 in PHY_REG10, but for some reason uses
CAL_CSI2_PHY_REG0_HSCLOCKCONFIG_DISABLE for the bit value. The value of
that macro is 1, so it works, but is still wrong.

Fix this to 1.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
Tested-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Reviewed-by: Benoit Parrot <bparrot@xxxxxx>
---
 drivers/media/platform/ti-vpe/cal.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/media/platform/ti-vpe/cal.c b/drivers/media/platform/ti-vpe/cal.c
index 76d55c76d938..c418296df0f8 100644
--- a/drivers/media/platform/ti-vpe/cal.c
+++ b/drivers/media/platform/ti-vpe/cal.c
@@ -645,8 +645,7 @@ static void i913_errata(struct cal_dev *dev, unsigned int port)
 {
 	u32 reg10 = reg_read(dev->cc[port], CAL_CSI2_PHY_REG10);
 
-	set_field(&reg10, CAL_CSI2_PHY_REG0_HSCLOCKCONFIG_DISABLE,
-		  CAL_CSI2_PHY_REG10_I933_LDO_DISABLE_MASK);
+	set_field(&reg10, 1, CAL_CSI2_PHY_REG10_I933_LDO_DISABLE_MASK);
 
 	cal_dbg(1, dev, "CSI2_%d_REG10 = 0x%08x\n", port, reg10);
 	reg_write(dev->cc[port], CAL_CSI2_PHY_REG10, reg10);
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki