Alex Riesen, Mon, Mar 23, 2020 09:40:11 +0100: > Geert Uytterhoeven, Mon, Mar 23, 2020 09:34:45 +0100: > > On Fri, Mar 20, 2020 at 5:43 PM Alex Riesen <alexander.riesen@xxxxxxxxxxx> wrote: > > > As all known variants of the Salvator board have the HDMI decoder > > > chip (the ADV7482) connected to the SSI4 on R-Car SoC, the ADV7482 > > > endpoint and the connection definitions are placed in the common board > > > file. > > > For the same reason, the CLK_C clock line and I2C configuration (similar > > > to the ak4613, on the same interface) are added into the common file. > > > > > > Signed-off-by: Alexander Riesen <alexander.riesen@xxxxxxxxxxx> > > > Reviewed-by: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> > > > > Did I provide a Reviewed-by? > > > > > The driver provides only MCLK clock, not the SCLK and LRCLK, > > > which are part of the I2S protocol. > > > > > > Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > > > > Perhaps you mixed it up with Laurent's? > > Sorry. I actually did: he did provded Reviewed-by in his email, and you > did not. I was ... a little overwhelmed. It's even worse: even Laurent didn't provide his Reviewed-by for this particular patch (it was bindings). Corrected. Regards, Alex
