Implement the newly introduced get_mbus_config operation to report the
number of currently used data lanes on the MIPI CSI-2 interface.
Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
---
drivers/media/i2c/adv748x/adv748x-csi2.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c
index 2091cda50935..f13563da3ff3 100644
--- a/drivers/media/i2c/adv748x/adv748x-csi2.c
+++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
@@ -214,9 +214,24 @@ static int adv748x_csi2_set_format(struct v4l2_subdev *sd,
return ret;
}
+static int adv748x_csi2_get_mbus_config(struct v4l2_subdev *sd, unsigned int pad,
+ struct v4l2_mbus_pad_config *config)
+{
+ struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd);
+
+ if (pad != ADV748X_CSI2_SOURCE)
+ return -EINVAL;
+
+ config->type = V4L2_MBUS_CSI2_DPHY;
+ config->csi2_dphy.data_lanes = tx->active_lanes;
+
+ return 0;
+}
+
static const struct v4l2_subdev_pad_ops adv748x_csi2_pad_ops = {
.get_fmt = adv748x_csi2_get_format,
.set_fmt = adv748x_csi2_set_format,
+ .get_mbus_config = adv748x_csi2_get_mbus_config,
};
/* -----------------------------------------------------------------------------
--
2.25.1
