Hi Robert,
On Fri, Mar 13, 2020 at 8:04 AM Robert Foss <robert.foss@xxxxxxxxxx> wrote:
> +static int __ov8856_power_on(struct ov8856 *ov8856)
> +{
> + struct i2c_client *client = v4l2_get_subdevdata(&ov8856->sd);
> + int ret;
> +
> + ret = clk_prepare_enable(ov8856->xvclk);
> + if (ret < 0) {
> + dev_err(&client->dev, "failed to enable xvclk\n");
> + return ret;
> + }
> +
> + gpiod_set_value_cansleep(ov8856->reset_gpio, GPIOD_OUT_HIGH);
The parameter of gpiod_set_value_cansleep() is typically 0 (inactive
state) or 1 (active state), so:
gpiod_set_value_cansleep(ov8856->reset_gpio, 1);
> +
> + ret = regulator_bulk_enable(ARRAY_SIZE(ov8856_supply_names),
> + ov8856->supplies);
> + if (ret < 0) {
> + dev_err(&client->dev, "failed to enable regulators\n");
> + goto disable_clk;
> + }
> +
> + gpiod_set_value_cansleep(ov8856->reset_gpio, GPIOD_OUT_LOW);
and here it should be:
gpiod_set_value_cansleep(ov8856->reset_gpio, 0);
Also, don't you need a reset period between the two?
