Simplify the code by using reg_write_field() where trivially possible.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
---
drivers/media/platform/ti-vpe/cal.c | 34 ++++++++++++-----------------
1 file changed, 14 insertions(+), 20 deletions(-)
diff --git a/drivers/media/platform/ti-vpe/cal.c b/drivers/media/platform/ti-vpe/cal.c
index cd788c6687cb..ebea5fa28691 100644
--- a/drivers/media/platform/ti-vpe/cal.c
+++ b/drivers/media/platform/ti-vpe/cal.c
@@ -759,10 +759,9 @@ static void csi2_phy_init(struct cal_ctx *ctx)
camerarx_phy_enable(ctx);
/* 2. Reset complex IO - Do not wait for reset completion */
- val = reg_read(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port));
- set_field(&val, CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_OPERATIONAL,
- CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_MASK);
- reg_write(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port), val);
+ reg_write_field(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port),
+ CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_OPERATIONAL,
+ CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_MASK);
ctx_dbg(3, ctx, "CAL_CSI2_COMPLEXIO_CFG(%d) = 0x%08x De-assert Complex IO Reset\n",
ctx->csi2_port,
reg_read(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port)));
@@ -784,18 +783,16 @@ static void csi2_phy_init(struct cal_ctx *ctx)
reg_read(ctx->dev, CAL_CSI2_TIMING(ctx->csi2_port)));
/* 4. Force FORCERXMODE */
- val = reg_read(ctx->dev, CAL_CSI2_TIMING(ctx->csi2_port));
- set_field(&val, 1, CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_MASK);
- reg_write(ctx->dev, CAL_CSI2_TIMING(ctx->csi2_port), val);
+ reg_write_field(ctx->dev, CAL_CSI2_TIMING(ctx->csi2_port),
+ 1, CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_MASK);
ctx_dbg(3, ctx, "CAL_CSI2_TIMING(%d) = 0x%08x Force RXMODE\n",
ctx->csi2_port,
reg_read(ctx->dev, CAL_CSI2_TIMING(ctx->csi2_port)));
/* E. Power up the PHY using the complex IO */
- val = reg_read(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port));
- set_field(&val, CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_STATE_ON,
- CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_MASK);
- reg_write(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port), val);
+ reg_write_field(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port),
+ CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_STATE_ON,
+ CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_MASK);
/* F. Wait for power up completion */
for (i = 0; i < 10; i++) {
@@ -867,13 +864,11 @@ static void csi2_wait_for_phy(struct cal_ctx *ctx)
static void csi2_phy_deinit(struct cal_ctx *ctx)
{
int i;
- u32 val;
/* Power down the PHY using the complex IO */
- val = reg_read(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port));
- set_field(&val, CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_STATE_OFF,
- CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_MASK);
- reg_write(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port), val);
+ reg_write_field(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port),
+ CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_STATE_OFF,
+ CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_MASK);
/* Wait for power down completion */
for (i = 0; i < 10; i++) {
@@ -890,10 +885,9 @@ static void csi2_phy_deinit(struct cal_ctx *ctx)
(i >= 10) ? "(timeout)" : "");
/* Assert Comple IO Reset */
- val = reg_read(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port));
- set_field(&val, CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL,
- CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_MASK);
- reg_write(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port), val);
+ reg_write_field(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port),
+ CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL,
+ CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_MASK);
/* Wait for power down completion */
for (i = 0; i < 10; i++) {
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
