Hi Robert,
On Tue, Mar 10, 2020 at 10:46 AM Robert Foss <robert.foss@xxxxxxxxxx> wrote:
> + ov8856: camera-sensor@10 {
> + compatible = "ovti,ov8856";
> + reg = <0x10>;
> + reset-gpios = <&pio 111 GPIO_ACTIVE_HIGH>;
Could you double check this is correct? Other OmniVision sensors have
reset-gpios as active low.
I suspect that the driver has also an inverted logic, so that's why it works.
I don't have access to the datasheet though, so I am just guessing.
